| MSDS | : | GOLD SPRAY ENAMEL, 55-308 | | CAS | : | 1330-20-7
67-64-1
74-98-6
75-28-5
106-97-8 | | NAME | : | metallic gold
xylene (sara 313) (cercla)
acetone (sara 313) (cercla)
propane
isobutane
butane
film formers, resins, and additives
explo haz: to hot surfaces. toxic gases may form when prod is contacted
ing 8: hold extremely flammable gas & flammable liquid under
haz decomp prods: produce fumes including carbon monoxide.
efts of overexp: & swelling are cndtns assoc w/excessive skin
first aid proc: other: if ingest, any type of overexp or symps of overexp
ing 12: prod, contact poison control center, emergency room or md immed;
resp prot: to determine type of airborne contaminants against which resp
vent: below the lowest suggested expos limits, lel below stated limit
ing 15: flame cutting on surfaces coated w/this product.
|
| |
|
|
PPG INDUSTRIES INC -- GOLD SPRAY ENAMEL, 55-308
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CHSKZ
MSDS NAME: GOLD SPRAY ENAMEL, 55-308
Responsible Party
Name: PPG INDUSTRIES INC
Address: 4325 ROSANNA DR
Box: 9
City: ALLISON PARK PA 15101
Info Phone: 800-441-9885
Emergency Phone Number: 304-843-1300
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PPG INDUSTRIES INC.
Address: 260 KAPPA DRIVE
City: PITTSBURG PA 15238
Phone: 412963-5822
=======================================================
Ingredients
=======================================================
Name: METALLIC GOLD
% Wt: 10-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 1330-20-7
RTECS #: ZE2100000
Name: XYLENE (SARA 313) (CERCLA)
% Wt: 30-35
OSHA PEL: 100 PPM
ACGIH TLV: 100 PPM; 150 STEL
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 67-64-1
RTECS #: AL3150000
Name: ACETONE (SARA 313) (CERCLA)
% Wt: 20-25
OSHA PEL: 1000 PPM
ACGIH TLV: 750 PPM; 1000 STEL
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 74-98-6
RTECS #: TX2275000
Name: PROPANE
% Wt: 15-20
OSHA PEL: 1000 PPM
ACGIH TLV: ASPHYXIANT
------------------------------
Cas: 75-28-5
RTECS #: TZ4300000
Name: ISOBUTANE
% Wt: 2-5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 106-97-8
RTECS #: EJ4200000
Name: BUTANE
% Wt: 2-5
OSHA PEL: 800 PPM
ACGIH TLV: 800 PPM
------------------------------
Name: FILM FORMERS, RESINS, AND ADDITIVES
% Wt: 5-10
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: EXPLO HAZ: TO HOT SURFACES. TOXIC GASES MAY FORM WHEN PROD IS CONTACTED
BY FLAME OR HOT SURFACES. AEROSOL CNTNRS
-----------------------------
Name: ING 8: HOLD EXTREMELY FLAMMABLE GAS & FLAMMABLE LIQUID UNDER
PRESSURE.
-----------------------------
Name: HAZ DECOMP PRODS: PRODUCE FUMES INCLUDING CARBON MONOXIDE.
-----------------------------
Name: EFTS OF OVEREXP: & SWELLING ARE CNDTNS ASSOC W/EXCESSIVE SKIN
CONTACT. CHRONIC OVEREXP: AVOID LONG TERM & RPTD CONTACT.
-----------------------------
Name: FIRST AID PROC: OTHER: IF INGEST, ANY TYPE OF OVEREXP OR SYMPS OF OVEREXP
OCCUR DURING OR FOLLOWING USE OF THIS
-----------------------------
Name: ING 12: PROD, CONTACT POISON CONTROL CENTER, EMERGENCY ROOM OR MD IMMED;
HAVE MSDS INFO AVAILABLE.
-----------------------------
Name: RESP PROT: TO DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH RESP
IS EFTIVE & HOW IT IS TO BE PROPERLY FITTED.
-----------------------------
Name: VENT: BELOW THE LOWEST SUGGESTED EXPOS LIMITS, LEL BELOW STATED LIMIT
& REMOVE DECOMP PRODS DURING WELDING OR
-----------------------------
Name: ING 15: FLAME CUTTING ON SURFACES COATED W/THIS PRODUCT.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGEST: HARMFUL/FATAL IF SWALLOWED. EYE CONTACT: CAUSES
EYE IRRIT. SKIN CONTACT: MAY CAUSE MODERATE SKIN IRRIT. INHAL: VAP &
SPRAY MIST MAY BE HARMFUL IF INHALED. RPTD EXPOS TO HIGH VAP CONCS MAY CAUS E
IRRIT OF THE RESP SYS & PERM BRAIN & NERVOUS SYS DMG. INTENTIONAL
MISUSE BY DELIB CONCENTRATING & (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: INHALING CONTENTS CAN BE
HARMFUL/FATAL. SIGNS & SYMPS OF OVEREXP: EYE WATERING, HDCHS, NAUS, DIZZ
& LOSS OF COORD ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION & VISUAL DISBURBS MAY INDICATE
EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING, BURNING, REDNESS
First Aid: INGEST: IF SWALLOWED, DO NOT INDUCE VOMIT. EYES: IN CASE OF CONTACT,
FLUSH EYES IMMED W/PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN: IN CASE OF
CONTACT, FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY WATERLE SS HAND CLEANER
& SOAP & WATER IF MATL APPEARS TO ADHERE TO SKIN. INHAL: IF AFFECTED
BY INHAL OF VAP OR SPRAY MIST, REMOVE TO FRESH AIR. APPLY ARTF RESP &
OTHER SUPPORTIVE MEASURES AS REQD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PROVIDE MAXIMUM VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH APPRVD RESP PROT & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE OR
OTHE R ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY CONTAINERS
SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMEN T
FACILITY.
Handling And Storage Precautions: DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS 1A
FLAMMABLE LIQUIDS.
Other Precautions: IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ THE MSDS(S) FOR THE OTHER COMPONENT OR COMPONENTS BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PART S.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: <0F,<-18C
Lower Limits: 1.1%
Extinguishing Media: USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM OR
UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING (SUPDAT)
Fire Fighting Procedures: USE NIOSH APPRVD SCBA & FULL PROT EQUIP (FP N).
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLOSED CNTNRS TO
PREVENT PRESS BUILDUP & (SUPDAT)
Unusual Fire/Explosion Hazard: KEEP CNTNRS TIGHTLY CLOSED. ISOLATE FROM HEAT,
ELEC EQUIP, SPARKS & OPEN FLAMES. CLOSED CNTNRS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. DO NOT APPLY
=======================================================
Control Measures
=======================================================
Respiratory Protection: OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING VENT
CONTROLS VAP EXHST OR FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) AIR PURIFYING OR
AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ RESP MFR'S INSTR
UCTIONS & LITERATURE CAREFULLY
Ventilation: PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS LISTED IN INGRED SECTION
Protective Gloves: NEOPRENE RUB, NITRILE RUB OR LATEX RUB.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N). WEAR
PROTECTIVE CLOTHING INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices: CLEAN OR DISCARD CONTAMINATED CLOTHING AND SHOES.
Supplemental Safety and Health: APPEAR/ODOR: OF THE SOLVENTS LISTED IN
INGREDIENT SECTION. EXTING MEDIA: NFPA CLASS 1A FLAMMABLE LIQUID FIRES. FIRE
FIGHT PROC: POSS AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF
WATER IS USED, FOG NOZZLES ARE PREFERABLE.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >133F,>56C
Vapor Density: HVR/AIR
Spec Gravity: 0.17
Appearance and Odor: PRESSURIZED CAN CONTAINING PAINT & PROPELLANTS WITH ODOR
CHARACTERISTICS(SUPDAT
Percent Volatiles by Volume: 87.5
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRDCE HAZ DECOMP PRODS WHEN HEATED,
WELDING, BRAZING OR FLAME CUTTING ON SURFACES COATED W/THIS PROD. MAY
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: GOLD SPRAY ENAMEL, 55-308
Company: PPG INDUSTRIES INC.
Street: 260 KAPPA DRIVE
City: PITTSBURG PA
Zipcode: 15238
Health Emergency Phone: 304-843-1300
Label Required IND: Y
Date Of Label Review: 08/11/1998
Status Code: C
Label Date: 08/11/1998
Origination
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: EXTREMELY FLAMMABLE. ACUTE: INHALATION: HARMFUL OR
FATAL IF SWALLOWED. EYE CONTACT: IRRITATION; REDNESS, ITCHING, BURNING
SENSATION AND VISUAL DISTURBANCES. SKIN CONTACT: IRRITATION; DRYNESS,
ITCHING, CRACKING, BURNING, REDNESS AND SWELLING. INHALATION: VAPOR AND
SPRAY MIST ARE HARMFUL IF INHALED; EYE WATERING, HEADACHES, NAUSEA, DIZZINESS
AND LOSS OF COORDINATION. CHRONIC: IRRITATION OF THE RESPI RATORY SYSTEM AND
PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSECAN BE HARMFUL
OR FATAL.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
FLEETWELD 7
| 13463-67-7
1332-58-7
7439-89-6
1344-09-8
1317-65-3
7439-96-5
14808-60-7
65996-61-4
7439-89-6 |
|
PLY #3 PROTECTIVE CREAM
| |
|
FLEETWELD 7
| 13463-67-7
1332-58-7
7439-89-6
1344-09-8
1317-65-3
7439-96-5
14808-60-7
65996-61-4
7439-89-6 |
|
CORROSION REMOVING COMPOUND,MIL-C-46156 A/MR TY I
| 1310-73-2
64742-53-6 |
|
HYSOL PC 18M
| |
|
SPEARMINT SCENTAIRE SOLID
| |
|
CITRIC ACID, ANHYDROUS
| 77-92-9 |
|
CONOSOL C-200
| |
|
1H74A-1 EP-P TNR CARTRIDGE BLACK FOR LBP-430,HP LJ IIP,IIIP
| |
|
TARNI-SHIELD BRAND SILVER CLEANER, 625/627
| 9004-65-3
1338-39-2
99-76-3
51229-78-8
7732-18-5
66402-68-4
56-81-5
112945-52-5
2885-00-9
9005-64-5 |
|
DRYLOK LATEX BONDING AGENT, 130
| 7732-18-5 |
|
INTERZINC 22 GREEN, QHA028
| |
|
DRYDENE DIESELALL, SAE 10W
| |
|
DRYDENE DIESELALL, SAE 20W-20
| |
|
DRYDENE DIESELALL, SAE 20W-30
| |
|
DRYDENE DIESELALL, SAE 20W-40
| |
|
DRYDENE DIESELALL, SAE 20W-50
| |
|
VELVET GLO EXT SG LATEX SERIES, 51000ALL
| 107-21-1 |
|
MIROFLEX LATEX GLOSS ENAMEL, 460
| 25265-77-4
124-68-5
57-55-6 |
|
CHEMLOK 219
| 64-17-5
67-56-1
108-10-1
108-95-2 |
|
BIOGUARD DPD 1 TABLETS
| |
|
K STENCIL INK BLACK, K-BK-Q
| |
|
K STENCIL INK BLACK, K-BK-G
| |
|
K STENCIL INK BLACK, K-BK-G5
| |
|
ALEX PAINTER'S CAULK, 05905
| |
|
ALEX PAINTER'S CAULK, 18057
| |
|
ALEX PAINTER'S CAULK, 18061
| |
|
ALEX PAINTER'S CAULK, 18065
| |
|
ALEX PAINTER'S CAULK, 18068
| |
|
ALEX PAINTER'S CAULK, 18070
| |
|
SPRED STAIN PRIMER SEALER, 3416 WHITE
| |
|
ULTRA-HIDE PVA PRIMER SEALER, 5114
| |
|
HFE-7100 SPECIALTY LIQUID, 98-0211-8895-2
| 163702-07-6
163702-08-7 |
|
QUIK KOTE ALUMINUM, 91535
| 67-64-1
1330-20-7
108-21-4
123-86-4
763-69-9
7429-90-5
74-98-6
75-28-5
108-88-3
71-43-2 |
|
OLEO RED B, 2214
| 67-56-1
64-17-5
1310-73-2
77-09-8 |
|
GOLD SPRAY ENAMEL, 55-308
| 1330-20-7
67-64-1
74-98-6
75-28-5
106-97-8 |
|
CANTEX 99
| 109-99-9
78-93-3
108-94-1 |
|
K STENCIL INK BLACK, 5A136
| |
|
LIQUID X, LUBE-20
| |
|
137B0248 DEVGRIP 137 DARK GRAY BASE, DV137B20154
| |
|
ACTIVATOR, S6501 410
| |
|
DRYDENE AERIAL LIFT FLUID
| |
|
DRYDENE DIESELALL PLUS 15W-40
| |
|
ECO-LAG ADHESIVE, 11-30
| |
|
ECO-LAG ADHESIVE, 11-35
| |
|
HALOCARBON 113
| 76-13-1 |
|
4308-0100 WHITE, DEVGUARD 4308 ALKYD (SUP DAT)
| |
|
4308-0200 PASTEL TINT BASE, DEVGUARD 4308 (SUP DAT)
| |
|
4308-0300 INTERMEDIATE TINT BASE, DEVGUARD (SUP DAT)
| 136-52-7
8052-41-3
64742-88-7
64742-95-6
71-43-2
64742-47-8
13463-67-7
25551-13-7
1330-20-7
66070-62-0
68188-21-6 |
|
4308-0400 DEEP TINT BASE, DEVGUARD 4308 (SUP DAT)
| 136-52-7
8052-41-3
64742-88-7
64742-95-6
71-43-2
64741-65-7
14807-96-6
13463-67-7
1330-20-7
68333-62-0
66070-62-0 |
|
|