POLYSI TECHNOLOGIES, INC -- PST-504
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJQFR
MSDS NAME: PST-504
Responsible Party
Name: POLYSI TECHNOLOGIES, INC
Address: 5226 MILLS INDUSTRIAL PARKWAY
City: NORTH RIDGEVILLE OH 44039
Info Phone: 440-327-3333
Emergency Phone Number: 440-327-3333
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: POLYSI TECHNOLOGIES, INC
Address: 5226 MILLS INDUSTRIAL PARKWAY
City: NORTH RIDGEVILLE OH 44039
Phone: UNKNOWN
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 63148-62-9
RTECS #: JT6484500
Name: DIMETHYLPOLYSILOXANES; (DIMETHYL POLYSILOXANE)
% low Wt: 85.
% high Wt: 95.
------------------------------
Cas: 112945-52-5
RTECS #: VV7310000
Name: FUMED SILICA, CRYSTALLINE-FREE; (SILICON DIOXIDE)
% low Wt: 5.
% high Wt: 15.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: CONTACT WITH EYES MAY CAUSE REDNESS. SKIN: CONTACT
WITH SKIN CAUSES NO KNOWN IRRITATION.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: EYES: FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
IF IRRITATION PERSISTS CONTACT A PHYSICIAN. SKIN: WASH CONTACTED AREAS WITH
SOAP AND WATER. INGESTION: IF INGESTED SEEK PROMPT MEDICA L ATTENTION. DO NOT
INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN OR ARTIFICIAL RESPIRATION (FP N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN
MATERIAL FOR DISPOSAL.
Waste Disposal Methods: DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Handling And Storage Precautions: HANDLING: NO SPECIAL REQUIREMENTS. STORAGE:
STORE IN TEMPERATURES BELOW 100F.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >93.3C, 200.F
Lower Limits: UNKNOWN
Upper Limits: UNKNOWN
Extinguishing Media: CARBON DIOXIDE OR DRY CHEMICAL (SMALL FIRES), FOAM OR
WATER SPRAY.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: ESTIMATED CODE: 100B, HEALTH HAZARD: 1,
FLAMMABILITY HAZARD: 0, REACTIVITY: 0, EXPLOSIVE LIMITS: UNKNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN (FP N).
Ventilation: NOT REQUIRED.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYE WASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
Supplemental Safety and Health: PHYSICAL DATA: VOLATILE ORGANIC COMPOUND %:
<1.5%.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >300.C, 572.F
Vapor Pres: <5 MM HG @ 25C
Vapor Density: >1
Spec Gravity: 1.03
PH: NEUTRAL
Solubility in Water: INSOLUBLE
Appearance and Odor: TRANSLUCENT PASTE.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG ACIDS AND OXIDIZING MATERIALS.
Hazardous Decomposition Products: FORMED BY FIRE: CARBON DIOXIDE, CARBON
MONOXIDE, SILICON DIOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: CLASS OR TYPE: DOT AND IATA: NON-HAZARDOUS.
=======================================================
Regulatory Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PST-504
Assigned IND: Y
Company: POLYSI TECHNOLOGIES, INC
Street: 5226 MILLS INDUSTRIAL PARKWAY
City: NORTH RIDGEVILLE OH
Zipcode: 44039
Health Emergency Phone: 440-327-3333
Label Required IND: Y
Date Of Label Review: 08/26/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: CONTACT WITH EYES MAY CAUSE REDNESS. SKIN:
CONTACT WITH SKIN CAUSES NO KNOWN IRRITATION. CHRONIC: NONE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.