3M GENERAL OFFICES -- SCOTH-WELD (TM) DP-100 NS (PART B) TRANSLUCEN
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-207-3906
MSDS Num: CLBNR
MSDS NAME: SCOTH-WELD (TM) DP-100 NS (PART B) TRANSLUCENT EPOXY ADHESIV
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: 3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 800-364-3577/651-737-6501(24 HOURS)
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: DEVELOPER,INDIRECT ELECTROSTATIC PROCESS
Specification Number: NONE
Type/Grade/Class: NONE
Unit of Issue: BX
Quantitative Expression: 00000000002EA
UI Container Qty: 1
Type of Container: UNKNOWN
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Effects of Exposure: EYE CONTACT: MILD EYE IRRITATION: SIGNS/SYMPTOMS CAN
INCLUDE REDNESS, SWELLING, PAIN, AND TEARING. VAPORS FROM HEATED MATERIAL
MAY CAUSE EYE IRRITATION. DUST CREATED BY CUTTING, GRINDING, SANDING, OR
MACHINING MAY CAUSE EYE IRRITATION. SKIN CONTACT: ALLERGIC SKIN REACTION:
SIGNS/SYMPTOMS CAN INCLUDE REDNESS, SWELLING, BLISTERING , AND ITCHING. MAY
BE ABSORBED THROUGHT THE SKIN AND PRODUCE E FFECTS SIMILAR TO THOSE CAUSED BY
INHALATION AND/OR INGESTION.*
Signs And Symptions Of Overexposure: *INHALATION: IRRITATION ( UPPER
RESPIRATORY ): SIGNS/SYMPTOMS CAN INCLUDE SORENESS OF THE NOSE AND THROAT,
COUGHING AND SNEEZING. VAPORS OF HEATED MATERIAL MAY CAUSE RESPIRATORY
SYSTEM IRRITATION. DUST FROM CUTTING, GRINDING, SANDING OR MACHINING MAY
CAUSE IRRITATION OF THE RESPIRATORY SYSTEM. IF SWALLOWED: INGESTION MAY
CAUSE: IRRITATION OF GASTROINTESTINAL TISSUES: SIGNS/SYMPTOMS CAN INC LUDE
PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS, AND BLOOD IN
FECES. **
First Aid: EYE CONTACT: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF WATER.
GET IMMEDIATE MEDICAL ATTENTION. SKIN CONTACT: IMMEDIATELY WASH SKIN WITH
SOAP AND LARGE AMOUNTS OF WATER. REMOVE CONTAMINATED CLO THING. IF
SIGNS/SYMPTOMS OCCUR, CALL A PHYSICIAN. WASH CONTAMINATED CLOTHING BEFORE
REUSE AND DISPOSE OF CONTAMINATED SHOES. INHALATION: IF SIGNS/SYMPTOMS
OCCUR, REMOVE PERSON TO FRESH AIR. IF SI GNS/SYMPTOMS CONTINUE, CALL A
PHYSICIAN. IF SWALLOWED: DO NOT INDUCE VOMITING. DRINK TWO GLASSES OF
WATER. CALL PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFORMATION
REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY PROTECTION, VENTILATION,
AND PERSONAL PROTECTIVE EQUIPMENT. CALL ( 612 ) 733-1110 OR ( 612) 733- 6100
FOR 24-HOUR SPILL ASSISTANCE. COVER WITH ABSORBENT MATERIAL. COLLECT
SPILLED MATERIAL. PLACE IN A U.S. DOT-APPROVED CONTAINER AND SEAL.
Waste Disposal Methods: CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERIAL INCINERATOR. DISPOSE
OF COMPLETELY CURED ( OR POLYMERIZED ) MATERIAL IN A SANITARY LANDFILL.
ENVIRONMENTAL DATA: NOT DETERMINED. REGULATORY INFORMATION: U.S. EPA
Handling And Storage Precautions: STORE AWAY FROM HEAT. KEEP OUT OF THE REACH
OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL , FOAM.
Fire Fighting Procedures: WEAR FULL PROTECTIVE CLOTHING, INCLUDING HELMET,
SELF-CONTAINED, POSITIVE PRESSURE OR PRESSURE DEMAND BREATHING APPARATUS,
BUNKER COAT AND PANTS, BANDS AROUND ARMS, WAIST AND LEGS, FACE MASK, AND PROT
ECTIVE COVERING FOR EXPOSED AREAS OF THE HEAD.
Unusual Fire/Explosion Hazard: KEEP CONTAINER TIGHTLY CLOSED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID BREATHING OF VAPORS CREATED DURING THE CURE
CYCLE. AVOID BREATHING OF DUST CREATED BY CUTTING, SANDING OR GRINDING.
SELECT ONE OF THE FOLLOWING NIOSH APPROVED RESPIRATORS BASED ON AIRBORNE CON
CENTRATION OF CONTAMINANTS AND IN ACCORDANCE WITH OSHA REGULATIONS:
HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROPRIATE LOCAL EXHAUST FOR GRINDING, CUTTING OR SANDING
CURED MATERIAL.
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: VENTED GOGGLES, FACE SHEILD
Other Protective Equipment: DO NOT CURE UP A MASS OF COMBINED MATERIAL LARGER
THAN 50 GRAMS TO PREVENT THE POSSIBLILITY OF EXOTHERM.
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THOROUGLY WITH SOAP AND WATER. DO NOT INGEST.
Supplemental Safety and Health: CURING OVENS MUST BE EXHAUSTED TO OUTDOORS OR
TO A SUITABLE EMISSION CONTROL DEVICE. USE IN A WELL-VENTILATED AREA. IF
EXHAUST VENTILATION IS NOT ADEQUATE, USE APPROPRIATE RESPIRATORY PROTECTION.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.170 WATER = 1
Viscosity: 10000.0-3000.0 CPS
Solubility in Water: NOT SOLLUABLE
Appearance and Odor: MEDIUM SYRUP, LIGHT STRAW COLORED, EPOXY ODOR
Percent Volatiles by Volume: 0.00% BY WT.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZING AGENTS HEAT HEAT IS GENERATED DURING CURE.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE OXIDES OF
NITROGEN OXIDES OF SULFUR ALDEHYDES KETONES HYDROCARBONS TOXIC VAPORS, GASES
OR PARTICULATES.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: **EXPOSURE TO THIS MATERIAL IN NORMAL STORAGE AND
HANDLING HAS NOT BEEN REPORTED TO CAUSE SIGNIFICANT ADVERSE HEALTH EFFECTS.
HOWEVER, UNDER NORMAL PROCESSING CONDITIONS, E.G. GRINGDING OR HEATING, T HIS
PRODUCT MAY RELEASE FUMES AND VAPORS OF VARIABLE COMPOSITION BASED ON
SPECIFIC PROCESS CONDITIONS. THESE PROCESS RELEASES MAY PRODUCE IRRITATION
OR ANY OF THE HEALTH EFFECTS LISTED ABOVE WHEN THE EMISSIONS ARE PRESENT AT
ELEVATED CONCENTRATIONS. USE WITH APPROPRIATE LOCAL EXHAUST VENTILATION.
=======================================================
Ecological Information
=======================================================
Ecological: HAZARDOUS WASTE NUMBER = NONE ( NOT U.S. EPA HAZARDOUS ). SINCE
REGULATIONS VARY, CONSULT APPLICABLE REGULATIONS OR AUTHORITIES BEFORE
DISPOSAL.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA HAZARD CLASS: FIRE HAZARD: NO PRESSURE: NO
REACTIVEITY: NO ACUTE: YES CHRONIC: YES
=======================================================
Other Information
=======================================================
Other Information: THE INFORMATION ON THIS DATA SHEET REPRESENTS OUR CURFENT
DATA AND BEST OPINION AS TO THE PROPER USE IN HANDLING OF THIS MATERIAL UNDER
NORMAL CONDITIONS. ANY USE OF THE MATERIAL WHICH IS NOT IN CONF ORMANCE WITH
THIS DATA SHEET OR WHICH INVOLVES USING THE MATERIAL IN COMBINATION WITH ANY
OTHER MATERIAL OR ANY OTHER PROCESS IS THE RESPONSIBILITY OF THE USER.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 156581
MSDS NAME: SCOTH-WELD (TM) DP-100 NS (PART B) TRANSLUCENT EPOXY ADHESIV
MSDS Prepared Date: 12/02/1993
Review Date: 09/08/1999
Multiple KIT Number: 0
Unit Of Issue: BX
Container QTY: 1
Type Of Container: UNKNOWN
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTH-WELD (TM) DP-100 NS (PART B) TRANSLUCENT EPOXY ADHESIV
Company: 3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 04/06/2001
Status Code: A
Origination Code: G
Hazard And Precautions: EYE CONTACT: MILD EYE IRRITATION: SIGNS/SYMPTOMS CAN
INCLUDE REDNESS, SWELLING, PAIN, AND TEARING. VAPORS FROM HEATED MATERIAL
MAY CAUSE EYE IRRITATION. DUST CREATED BY CUTTING, GRINDING, SANDING, OR
MACHINING MAY CAUSE EYE IRRITATION. SKIN CONTACT: ALLERGIC SKIN REACTION:
SIGNS/SYMPTOMS CAN INCLUDE REDNESS, SWELLING, BLISTERING , AND ITCHING. MAY
BE ABSORBED THROUGHT THE SKIN AND PRODUCE E FFECTS SIMILAR TO THOSE CAUSED BY
INHALATION AND/OR INGESTION.*
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|