PRC-DESOTO INTERNATIONAL, INC. -- PR1523-M, 1523M1
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLSJP
MSDS NAME: PR1523-M, 1523M1
Responsible Party
Name: PRC-DESOTO INTERNATIONAL, INC. A PPG INDUSTRIES COMPANY
Address: 5454 SAN FERNANDO ROAD
Box: 1800
City: GLENDALE CA 91203
Info Phone: 818-240-2060
Emergency Phone Number: 800-228-5635
Resp. Party Other MSDS No.: MS2098A02
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PRC-DESOTO INTL INC
Address: 5454 SAN FERNANDO RD
Box: 1800
City: GLENDALE CA 91203
Phone: 818-240-2060/800-228-5635
=======================================================
Ingredients
=======================================================
Cas: 61788-32-7
RTECS #: WZ6535000
Name: HYDROGENATED TERPHENYL
Percent by Wt: 75.
OSHA PEL: 0.5 PPM
ACGIH TLV: 0.5 PPM
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 1313-59-3
Name: SODIUM OXIDE
< Wt: 5.
OSHA PEL: UNDETERMINED
ACGIH TLV: UNDETERMINED
------------------------------
Cas: 14808-60-7
RTECS #: VV7330000
Name: CRYSTALLINE SILICA & QUARTZ
< Wt: 5.
OSHA PEL: 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 26447-40-5
Name: DIPHENYLMETHANEDIISOCYANATE
Percent by Wt: 15.
OSHA PEL: 0.02 PPM CEILING
ACGIH TLV: 0.005 PPM
------------------------------
Cas: 9016-87-9
RTECS #: TR0350000
Name: POLYMERIC MDI
Percent by Wt: 5.
OSHA PEL: 0.02 PPM
ACGIH TLV: 0.02 PPM
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: YES
Effects of Exposure: HYDROGENATED TERPHENYL: EYES: IRRITATING. SKIN: PROLONGED
SOAKING OF SKIN MAY PRODUCE DERMAL IRRITATION. INHALATION: MAY CAUSE
DIZZINESS, DROWSINESS AND FATIGUE. DUE TO VERY LOW VOLATILITY, INHALATION
EXPOSURE UNLIKELY UNDER NORMAL CONDITION OF USE. INGESTION: PRACTICALLY
NON-TOXIC. QUARTZ: REPEATED INHALATION OF RESPIRABLE FREE SILICA DUST MAY
CAUSE DELAYED LUNG INJURY (SILICOSIS) WHICH IS AN OCC UPATIONAL DISEASE.
METHYLENE BISPHENYL ISOCYANATE: EYES: VERY IRRITATING TO EYES. LEGAL
WORKPLACE EXPOSURE LIMITS ARE MUCH LOWER THAN LEVELS WHICH TYPICALLY CAUSE
IRRITATION-EYE IRRITATION IS A STRONG INDICATION THAT ONE IS
(OVEREXPOSURE)
Explanation Of Carcinogenicity: CRYSTALLINE SILICA, QUARTZ: IARC GROUP 1,
VOLUME 68, PAGE 41, 1997; NTP 9TH ANNUAL REPORT KNOWN TO BE HUMAN CARCINOGENS
LIST. NOTE: THE CLASSIFICATION OF CRYSTALLINE SILICA AS A CANCER CAUSING
CHEMICA L IS BASED ON INHALATION OF RESPIRABLE DUST. THIS FORM OF EXPOSURE
WILL NOT OCCUR IN NORMAL USE OF THIS PRODUCT.
Signs And Symptions Of Overexposure: HEALTH HAZARDS (CON'T): BEING
OVEREXPOSED. SKIN: PROLONGED EXPOSURE MAY CAUSE DRYING/CRACKING OF SKIN.
POSSIBLE DERMATITIS AND SENSITIZATION. INHALATION: DUE TO LOW VOLATILITY,
SIGNIFICANT EXPOSURE T O VAPOR NOT EXPECTED UNLESS OVERHEATED. EXCESSIVE
INHALATION CAN PRODUCE IRRITATION OF NOSE, THROAT, RESPIRATORY TRACT.
EXCESSIVE/EXTENSIVE EXPOSURE CAN PRODUCE REVERSIBLE SYMPTOMS OF BRONCHITIS.
SENS ITIZED INDIVIDUALS WILL DEVELOP ASTHMA-LIKE SYMPTOMS AT LOW EXPOSURE,
SENSITIVITY TO ISOCYANATE AND SHOULD AVOID INHALATION EXPOSURE. INGESTION:
MAY CAUSE NAUSEA, VOMITING, ABDOMINAL DISCOMFORT AND DI ARRHEA.
(TOXICOLOGICAL)
First Aid: EYES: FLUSH WITH LUKE WARM WATEER FOR 15 MINUTES, IF SYMPTONS
PERSIST, CONSULT PHYSICIAN. SKIN: WASH WITH SOAP AND WATER, IF SYMPTOMS
PERSIST, CONSULT A PHYSICIAN. INHALATION: REMOVE TO FRESH AIR. IF SYMPTOMS
ARE PRESENT CONSULT A PHYSICIAN. INGESTION: CONTACT A PHYSICIAN IMMEDIATELY
(FP N).
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: COVER WITH ABSORBANT MATERIAL ADD DECONTAMINATION
SOLUTION AND ALLOW TO REACT FOR 10 MINUTES. COLLECT IN CONTAINERS, ADD
ADDITIONAL DECONTAMINATION SOLUTION AND KEEP LOOSELY COVERED FOR 48 HOURS.
CLEA N-UP RESIDUE WITH A SUITABLE SOLVENT. DECONTAMINATION SOLUTION: 5%
CONCENTRATED AMONIA, 2% DETERGENT, 93% WATER. SEE STATE REGULATIONS PRIOR TO
DISPOSAL OF SPILLAGE.
Neutralizing Agent: DECONTAMINATION SOLUTION: 5% CONCENTRATED AMMONIA, 2%
DETERGENT, 93% WATER.
Waste Disposal Methods: DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS (FP N).
Handling And Storage Precautions: AVOID MOISTURE CONTAMINATION WHICH WILL CAUSE
CARBON DIOXIDE PRESSURE. DO NOT RESEAL CONTAINERS IF MOISTURE CONTAMINATION
IS SUSPECTED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >93.3C, 200.F
Lower Limits: UNKNOWN
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures: USE NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS
AND FULL PROTECTIVE EQUIPMENT (FP N). USE AIR-SUPPLIED RESPIRATOR. USE WATER
TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard: HIGH TEMPERATURE MAY CAUSE PRESSURE BUILDUP IN
CLOSED CONTAINER. FLAMMABILITY CLASS: NOT FLAMMABLE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH-APPROVED RESPIRATOR APPROPRIATE FOR THE
EXPOSURE OF CONCERN (FP N). WHEN SPRAYING OR APPLYING IN ANY CIRCUMSTANCES
LIKELY TO PRODUCE AIRBORNE LEVEL OF HAZARDOUS INGREDIENTS IN EXCESS OF TLV,
USE AN ORGANIC VAPOR CARTRIDGE OR AIR-SUPPLIED RESPIRATOR.
Ventilation: GENERAL VENTILATION TO MAINTAIN VAPORS BELOW PEL.
Protective Gloves: SOLVENT-RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL GOGGLES AND FULL-FACE SHIELD.
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =340.C, 644.F
Spec Gravity: 1.04
Evaporation Rate & Reference: NON VOLATILE
Appearance and Odor: APPEARANCE: CLEAR BROWN. ODOR: NONE SPECIFIED BY MFR (FP
N).
Percent Volatiles by Volume: 0.0%
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NOT KNOWN.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: OXIDES OF CARBON AND NITROGEN, POSSIBLE
TRACES OF HCN.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: N/P. SIGNS/SYMPTOMS OF OVEREXPOSURE (CON'T):
POLYMERIC MDI: EYES: MAY CAUSE BURNING, TEARING, REDDENING. POSSIBLE
TRANSIENT CORNEAL INJURY. SKIN: PROLONGED EXPOSURE MAY CAUSE DRYING AND
CRACKING OF SKIN. INGESTION: MAY CAUSE NAUSEA, VOMITING, ABDOMINAL
DISCOMFORT AND DIARRHEA.
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: D.O.T HAZARD CLASS: NONE. UN #: NONE. PROPER SHIPPING
NAME: NOT REGULATED UNDER 49 CFR.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: INGREDIENT SUBJECT TO THE REPORTING REQUIREMENTS OF
SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT
OF 1986 AND 40 CFR PART 372: DIPHENYLMETHANEDIISOCYANATE.
Federal Regulatory Information: ALL INGREDIENTS IN THIS PRODUCT ARE LISTED IN
THE T.S.C.A. INVENTORY AND ARE LISTED AS REQUIRED BY 29CFR 1910.1200 BECAUSE
THEY APPEAR ON AIRBORNE CONTAMINANTS LIST. HOWEVER, IN THIS PRODUCT, THEY ARE
IN FULLY ENCAPSULATED FORM AND THEREFORE ARE NOT HAZARDOUS TO USERS UNDER
NORMAL CIRCUMSTANCES. IF THE CURED PRODUCT IS SANDED OR GROUND SO AS TO
RELEASE RESPIRABLE PARTICLES, SUITABLE RESPIRATORY PR OTECTION SHOULD BE
USED.
State Regulatory Information: CRYSTALLINE SILLICA IS ON THE LIST ENTITLED
"CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER."
=======================================================
Other Information
=======================================================
Other Information: HAZARD RATINGS: HEALTH - 2, FIRE - 1, REACTIVITY - 0,
PERSONAL PROTECTION - H. PRODUCT CODE: 1523M1. PRODUCT CLASS: HYDROCARBON
RESIN COMPOUND. PHYSICAL/CHEMICAL (CON'T): LIQUID DENSITY: HEAVIER TH AN
WATER. WGT PER GALLON: 8.66 POUNDS, V.O.C. (GR/L): -0-. VAPOR PRESSURE:
HYDROGENATED TERPHENYL: 1 MM HG; SODIUM OXIDE: 0 MM HG; CRYSTALLINE SILICA
& QUARTZ: N/AP; DIPHENYLMETHANEDIISOCYANATE: .1, POLYMERIC MDI: 0.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PR1523-M, 1523M1
Company: PRC-DESOTO INTL INC
Street: 5454 SAN FERNANDO RD
PO Box: 1800
City: GLENDALE CA
Zipcode: 91203
Health Emergency Phone: 800-228-5635
Label Required IND: Y
Date Of Label Review: 12/13/2001
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE/CHRONIC: CANCER HAZARD. CONTAINS CRYSTALLINE
SILICA WHICH IS LISTED AS A LUNG CARCINOGEN (FP N). PRODUCT MAY BE VERY
IRRITATING TO EYES. PROLONGED SKIN CONTACT MAY CAUSE DERMAL IRRITATION, DRYIN
G AND CRACKING OF SKIN, POSSIBLE DERMATITIS AND SENSITIZATION. INHALATION MAY
CAUSE DIZZINESS, DROWSINESS, FATIGUE, IRRITATION OF NOSE, THROAT &
RESPIRATORY TRACT. EXCESSIVE EXPOSURE CAN PRODUCE REVER SIBLE SYMPTOMS OF
BRONCHITIS. SENSITIZED INDIVIDUALS MAY DEVELOP ASTHMA-LIKE SYMPTOMS.
INGESTION MAY CAUSE NAUSEA, VOMITING, ABDOMINAL DISCOMFORT AND DIARRHEA.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
1812Y, CARGILL REFRACTIVE INDEX SERIES B ND=1.642-1.656
| |
|
1812X, CARGILL REFRACTIVE INDEX SERIES B ND=1.642-1.656
| |
|
18125, CARGILL REFRACTIVE INDEX SERIES B ND=1.642-1.656
| |
|
18122, CARGILLE REFREACIVE INDEX LIQUID SERIES (SEE SUPPL)
| |
|
PHILLYCLAD 1775/620TS RESIN, 3461R
| 25068-38-6 |
|
VOLATILE GC/MS CALIBRATION STANDARD, STS-112
| 460-00-4
67-56-1 |
|
BOELUBE 70106
| |
|
ELECTRON 296
| |
|
ELECTRON 296
| |
|
ELECTRON 296
| |
|
HP C4195A- IMAGING DRUM CARTRIDGE
| 13463-67-7 |
|
ELECTRON 296
| |
|
ELECTRON 296
| |
|
SILVER-COPPER-CADMIUM-ZINC BRAZING ALLOYS
| 7440-22-4
7440-43-9
7440-66-6
7440-50-8 |
|
SEN LUBE 7808, GRADE 3
| |
|
SPRED LO-LUSTRE LATEX WALL & TRIM ENAMEL 3187
| 1344-00-9
25035-69-2
57-55-6
7732-18-5
25067-01-0
13463-67-7
1332-58-7
108-05-4
25265-77-4
64741-88-4 |
|
RETAINING COMPOUND 620 HIGH TEMPERATURE
| 114-83-0
613-48-9
110-16-7
81-07-2
112945-52-5
24448-20-2
3006-93-7
80-15-9
27813-02-1 |
|
HIGH TACK ADHESIVE SEALANT 80062
| 67-64-1
110-54-3
9003-18-3
8050-09-7 |
|
AEROGLAZE 9947B WASH PRIMER PART B
| 78-92-2
64-17-5
7664-38-2
108-65-6
88917-22-0 |
|
271 ADHESIVE/SEALANT
| 25852-47-5
39382-25-7
81-07-2
613-48-9
80-15-9 |
|
P-1035 TT-L-58E TYPE II. GLOSS YELLOW
| 78-93-3
117-81-7
71-36-3
108-65-6
123-86-4
108-88-3
67-63-0
64742-89-8
142-82-5
67-64-1
64742-88-7 |
|
LITHIUM OXYHALIDE PRIMARY BATTERY(BCX)
| 7719-09-7
7726-95-6
7782-50-5
7439-93-2 |
|
SL-086, GREASE, ORDINANCE, EP
| |
|
SKY WIPES
| |
|
SKY WASH
| |
|
19023, MIL-PRF-17672D GR 2110 TH
| 64742-54-7 |
|
365-1, ELECTRON (A)
| |
|
3431, 10 PPM-1.1% PROPANE IN AIR
| 74-98-6
132259-10-0 |
|
PERMA-SLIK G AEROSOL (PPSGAE)
| |
|
M08 7267, 13 TBN ZINC FREE RR DIESEL OIL SAE 40
| |
|
PREVOX 2070100
| 7778-50-9
57-13-6 |
|
WILLIAMS LITE-NING LIQUID 2257000
| 7664-38-2
7732-18-5 |
|
GLIDSAFE UTS-4B
| |
|
OXYGEN, REFRIGERATED LIQUID
| 7782-44-7 |
|
KS-4 PLUS
| 1302-93-8
65997-15-1
1302-76-7
14808-60-7
60676-86-0
14464-46-1
1344-28-1
1332-58-7
69012-64-2
13463-67-7
7782-42-5
7789-75-5 |
|
34-410 DURACOLOR 12 YR INT S/G WHITE/PAS.BASE
| 13463-67-7
7732-18-5
1332-58-7 |
|
N-6084 PASTEL GREEN LATEX; N.F.
| |
|
2220, HAYNES GTD 222 ALLOY
| 7439-89-6
7439-96-5
7439-98-7
7440-02-0
7440-21-3
7429-90-5
7440-42-8
7440-03-1
7440-32-6
7440-50-8
7440-25-7
7440-33-7
7440-67-7
7440-48-4
7440-47-3 |
|
N06625, HAYNES 625 SQ ALLOY
| 7440-48-4
7440-47-3
7439-89-6
7439-96-5
7439-98-7
7440-02-0
7440-21-3
7429-90-5
7440-03-1
7440-32-6
7440-25-7 |
|
N06617, HAYNES 617 ALLOY
| 7439-89-6
7439-96-5
7439-98-7
7440-02-0
7440-48-4
7440-47-3
7440-21-3
7429-90-5
7440-42-8
7440-03-1
7440-32-6 |
|
N06059, HAYNES 59 ALLOY
| 7439-98-7
7440-02-0
7440-21-3
7440-48-4
7440-47-3
7439-89-6
7439-96-5
7429-90-5 |
|
2076, HAYNES 75 ALLOYS
| 7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3
7440-32-6
7440-50-8 |
|
R30556, HAYNES 556 ALLOY
| 7440-48-4
7440-47-3
7439-89-6
7439-96-5
7440-02-0
7440-21-3
7440-33-7
7439-91-0
7429-90-5
7439-98-7
7440-67-7
7440-25-7 |
|
MC-ZINC 2.8
| |
|
SCOTCH-GRIP 4224-NF PRESSURE SENSITIVE ADHESIVE
| 7732-18-5
9011-14-7
25155-30-0
1336-21-6 |
|
PR1523-M, 1523M1
| 61788-32-7
1313-59-3
14808-60-7
26447-40-5
9016-87-9 |
|
TA-0371 THINSET MORTAR WHITE
| 65997-15-1
14808-60-7
1317-65-3 |
|
SODIUM FLUOROSILICATE
| 16893-85-9 |
|
PERMA-SLIK G AEROSOL (PPSGAE)
| |
|
HP 4500 PHOTOPRECISE TONER - CYAN
| |
|
|