iron oxide styrene acrylate copolymer styrene acrylate copolymer polyolefin; (polyofin) metal complex azo dye carbon black
UNITED LASER -- IBM 4019
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BTZMC
MSDS NAME: IBM 4019
Responsible Party
Name: UNITED LASER
Address: 1541 S BERETANIA ST #301
City: HONOLULU HI 92826
Info Phone: 808-941-1220
Emergency Phone Number: 808-941-1220
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: RECHARGERS
Address: UNKNOWN
City: BEN WHEELER TX 75754
Phone: 903-941-1220
Name: UNITED LASER
Address: 1541 S.BERETANIA ST #301
Box: 301
City: HONOLULU HI 96826
Phone: 516-488-6700/800-424-9300(CHEMTREC)
=======================================================
Ingredients
=======================================================
Cas: 1332-37-2
RTECS #: NO7380000
Name: IRON OXIDE
% Wt: <5
OSHA PEL: 10 MG/M3
ACGIH TLV: 5 MG/M3 (AS FE)
------------------------------
Cas: 25153-46-2
Name: STYRENE ACRYLATE COPOLYMER
% Wt: 70-80
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 25153-46-2
Name: STYRENE ACRYLATE COPOLYMER
% Wt: 10
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Name: POLYOLEFIN; (POLYOFIN)
% Wt: 5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 85179-66-8
Name: METAL COMPLEX AZO DYE
% Wt: 1
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 1333-86-4
RTECS #: FF5800000
Name: CARBON BLACK
% Wt: <10
OSHA PEL: 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: NO KNOWN HEALTH HAZARD WHEN USED AS INTENDED IN A PRINTING
DEVICE. INHAL:GASPING & COUGHING - DO NOT BREATHE IN TONER. EYE/SKIN
CONTACT:NO HAZARD.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP)
(FP N). EYES:WASH FOR AT LEAST 15 MINUTES, AS W/ANY MATERIAL THAT IRRITATES.
SKIN:WASH W/COLD WATER & SOAP. INGEST:DRINK 2 GLASSES OF MILK OR WATER.
CONTACT POISON CONTROL CENTER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: AVOID INHALATION, SWEEP MATERIAL & DISPOSE OF
PROPERLY.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MAY BE SUBJECT TO FEDERAL, STATE & LOCAL
LAWS.
Handling And Storage Precautions: AVOID EYE CONTACT. AVOID BREATHING TONER
DUST. STORE <95F. AVOID AIRBORNE PARTICLES.
Other Precautions: KEEP OUT OF REACH OF CHILDREN. KEEP FROM CONTACT W/OXIDIZING
MATERIALS. AVOID DUSTING.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: CO*2, H*2O, DRY CHEMICAL EXTINGUISHER.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: POSSIBLE CONDITIONS COULD CREATE A DRY DUST
EXPLOSION; AVOID SOURCES OF IGNITION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N). NONE REQUIRED DURING THE PRINTING CYCLE. AVOID DIRECT
HEAVY INHALATION OF PRODUCT.
Ventilation: GOOD GENERAL VENTILATION.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED SAFETY GLASSES (FP N).
Other Protective Equipment: NONE REQUIRED.
Work Hygienic Practices: IF STAINED, WASH W/COLD WATER & SOAP.
Supplemental Safety and Health: % VOLAT:LESS THAN NEGLIGIBLE.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: >212F,>100C
Spec Gravity: 1.3-1.6(H*2O=1)
Evaporation Rate & Reference: LESS THAN NEGLIGIBLE
Solubility in Water: LESS THAN NEGLIGIBLE
Appearance and Odor: FINE, DRY, BLACK THERMOPLASTIC POWDER W/SLIGHT ODOR.
Percent Volatiles by Volume: SUPDAT
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZERS.
Hazardous Decomposition Products: COMBUSTION WILL PRODUCE CO*2 & CO.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: IBM 4019
Assigned IND: Y
Company: UNITED LASER
Street: 1541 S.BERETANIA ST #301
PO Box: 301
City: HONOLULU HI
Zipcode: 96826
Health Emergency Phone: 808-941-1220
Label Required IND: Y
Date Of Label Review: 07/19/1994
Status Code: C
Label Date: 07/19/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: None
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: AVOID BREATHING TONER DUST. STORE BELOW 95F. ACUTE:NO
KNOWN HEALTH HAZARD WHEN USED AS INTENDED IN A PRINTING DEVICE. INHAL:GASPING
& COUGHING - DO NOT BREATHE IN TONER. EYE/SKIN CONTACT:NO HAZARD. CH
RONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.