LECO CORPORATOR -- TIN, CAPSULES, FLUX, PLUGS, ACCELERATOR, 761-
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BTYYS
MSDS NAME: TIN, CAPSULES, FLUX, PLUGS, ACCELERATOR, 761-739
Responsible Party
Name: LECO CORPORATOR
Address: 3000 LAKEVIEW AVE
City: ST. JOSEPH MI 49085
Info Phone: 616-983-5531
Emergency Phone Number: 616-983-5531
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LECO CORPORATION
Address: 3000 LAKEVIEW AVE.
City: ST JOSEPH MI 49085-2396
Phone: 616-983-5531
Name: LECO CORPORATOR
Address: 3000 LAKEVIEW AVE
City: ST. JOSEPH MI 49085
Phone: 616-983-5531
=======================================================
Ingredients
=======================================================
Cas: 7440-31-5
RTECS #: XP7320000
Name: TIN
% Wt: 100
OSHA PEL: 2 MG/M3
ACGIH TLV: 2 MG/M3
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE & CHRONIC:INHAL:WHEN INHALED AS DUST OR FUME,
TIN LEADS TO A BENIGN PNEUMOCONIOSIS W/OUT SYMPTOMS OF INTERFERENCE WITH
PULMONARY FUNCTIONS. INGEST:MAY IRRITATE STOMACH LINING. EYES:MAY IRRITATE
EYES. SIGNS & SYMPTOMS ASSOCIATED W/EXPOSURE OVER TLV:WHEN INHALED AS
DUST OR FUME, TIN LEADS TO A (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:BENIGN PENUMOCONIOSIS W/OUT
SYMPTOMS OF INTERFERENCE WITH PULMONARY FUNCTIONS.
First Aid: INHAL:USUALLY NOT IMPORTANT. SEE A PHYSICIAN. INGEST:INDUCE VOMITING
IF CONSCIOUS. EYES:WASH WITH WATER AT LEAST 15 MINUTES; KEEP LIDS OPEN.
SKIN:WASH WITH WATER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ANY NORMAL CLEAN UP ROCEDURE IS APPLICABLE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: BE COGNIZANT OF POTENTIAL WATER POLLUTION. NOTE:THIS
MATERIAL MAY HAVE VALUE ON A RECYCLED BASIS. DISPOSAL MUST BE I/A/W FEDERAL,
STATE & LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: AVOID CONITIONS WHICH CREATE FUMES OR FINE
DUSTS. AVOID INHALATIONS OR INGESTION. PRACTICE GOOD HOUSEKEEPING AND
PERSONAL HYGIENE PROCEDURES.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NON-FLAMMABLE
Extinguishing Media: SAND, DRY CHEMICAL, OR CO*2 SHOULD BE USED ON SURROUNDING
FIRE. DO NOT USE WATER ON MOLTEN METAL WILL CAUSE EXPLOSION.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: WATER ON MOLTEN METAL WILL CAUSE EXPLOSION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NORMALLY NOT REQUIRED. IF DUST OR FUME, USE NIOSH/MSHA
APPROVED RESPIRATOR.
Ventilation: LOCAL IF DUST OR FUME.
Protective Gloves: NOT REQUIRED.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: NOT USUALLY REQUIRED.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
B.P. Text: 5018F,2770C
M.P/F.P Text: 449F,232C
Spec Gravity: 7.30 (H*20=1)
Solubility in Water: INSOLUBLE
Appearance and Odor: SILVERY WHITE METALLIC; NO ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: STORAGE NEAR HALOGENS.
Materials To Avoid: HALOGENS, SULFUROUS CHLORSULPHURIC AND PYROSULPHURIC ACIDS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: TIN, CAPSULES, FLUX, PLUGS, ACCELERATOR, 761-739
Assigned IND: Y
Company: LECO CORPORATOR
Street: 3000 LAKEVIEW AVE
City: ST. JOSEPH MI
Zipcode: 49085
Health Emergency Phone: 616-983-5531
Label Required IND: Y
Date Of Label Review: 02/23/1994
Status Code: C
Label Date: 02/23/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:EYES:IRRITATION. INGEST:IRRITATION. CHRONIC:NONE
SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.