RELTON CORP -- ALUMINUM CUTTING FLUID,A-9
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-422-9550
MSDS Num: BWLCX
MSDS NAME: ALUMINUM CUTTING FLUID,A-9
Responsible Party
Name: RELTON CORP
Address: 317 ROLYN PLACE
Box: 779
City: ARCADIA CA 91006
Info Phone: 213-681-2551/800-423-1505
Emergency Phone Number: 213-681-2551
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: CUTTING FLUID
Specification Number: NONE
Type/Grade/Class: NONE
Unit of Issue: PT
UI Container Qty: 0
Type of Container: CAN
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: TLV FOR OIL MIST IS 5 MG/M3.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYESS AND SKIN: MAY CAUSE MILD IRRITATION. INHALATION:
MAY CAUSE MILD UPPER RESPIRATORY IRRITATION. INGESTION: POSSIBLE NAUSEA.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION, NAUSEA.
First Aid: EYES-FLUSH FOR 15 MIN WITH WATER. SKIN-WASH WITH SOAP AND WATER.
INHALATION-REMOVE TO FRESH AIR. INGESTION-DO NOT INDUCE VOMITING, GIVE LOTS
OF WATER TO A CONSCIOUS PERSON. CALL DOCTOR.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR RESPIRATOR AND PROTECTIVE CLOTHING. TREAT AS OIL
SPILL. SOAK UP ON ABSORBENT CLAY OR SAND AND REMOVE TO CONTAINERS.
Neutralizing Agent: NOT RELEVANT
Waste Disposal Methods: TRANSPORT IN DOT APPROVED CONTAINER TO EPA APPROVED
TREATEMNT, STORAGE AND DISPOSAL FACILITY. FOLLOW LOCAL, STATE AND FEDERAL
DISPOSL REGULATIONS.
Handling And Storage Precautions: AVOID PRODUCTION OF OIL MISTS. AVOID
EXCESSIVE HEAT. AVOID REPEATED OR PROLONGED SKIN OR EYE CONTACT.
Other Precautions: WHILE THERE IS NO TLV ESTABLISHED FOR THIS PRODUCT, AIRBORNE
MISTS SHOULD BE KEPT BELOW THE NUISANCE TLV FOR OIL MIST: 5 MG/M3.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: CC
Flash Point: =130.C, 266.F
Extinguishing Media: USE CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER AS A MIST
ONLY.
Fire Fighting Procedures: PREFER CARBON DIOXIDE OR SAND FOR OIL FIRE.
Unusual Fire/Explosion Hazard: NO UNUSUAL HAZARDS. EXPOSING CONTAINERS TO
INTENSE HEAT COULD CAUSE DRUMS TO RUPTURE. COOL FIRE-EXPOSED CONTAINERS WITH
WATER SPRAY TO PREVENT RUPTURE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NORMALLY NOT NEEDED. FOR OIL-TYPE MIST, USE NIOSH
LISTED RESPIRATOR.
Ventilation: LOCAL-MECHANICAL TO REMOVE OIL MIST. LOCAL EXHAUST: ADEQUATE TO
AVOID FUMES AND OIL MISTS.
Protective Gloves: NITRILE TYPE ,OIL RESISTANT
Eye Protection: CHEMICAL GOGGLES OR FULL FACESHIELD.
Other Protective Equipment: CLEAN CLOTHES. APRON OR CHEMICAL SUITE WHERE
SPLASHING MAY OCCUR.
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING. LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE. DISCARD OIL SOAKED SHOES.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F4
NRC/State LIC No: NOT RELEVANT
Boiling Point: =204.4C, 400.F
B.P. Text: @760 MM/HG
Melt/Freeze Pt: =-28.9C, -20.F
Vapor Pres: .1MM @ 100 DEG F
Spec Gravity: 0.883 (H20=1)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: LIGHT GREEN OIL WITH LIGHT FATTY ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: FLAME, HEAT.
Materials To Avoid: STRONG OXIDIZING AGENTS. SWELLS NATURAL RUBBER, SOME
PLASTICS, LIGHT METALS ON PROLONGED EXPOSURE MAY OCCUR.
Hazardous Decomposition Products: SMOKE, CARBON MONOXIDE, CARBON DIOXIDE,
ACROLEIN MAY BE FORMED.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT-NO HAZARDOUS SUBSTANCE, NO HAZARD CLASS, NO DOT ID.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: NOT CONSIDERED TO BE SUBJECT TO TITLE III.
Federal Regulatory Information: TSCA: ALL COMPONENTS REQUIRED TO BE LISTED ON
THE INVENTORY ARE LISTED.
State Regulatory Information: CALIFORNIA PROP. 65 MATERIAL: NONE.
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 71650
MSDS NAME: ALUMINUM CUTTING FLUID,A-9
MSDS Prepared Date: 10/23/1997
Review Date: 04/20/1999
Net Unit Weight: 0.9 LBS
AF MMAC Code: NR
Multiple KIT Number: 0
Review IND: Y
Unit Of Issue: PT
Container QTY: 0
Type Of Container: CAN
Additional Data: NOT REGULATED FOR TRANSPORTATION, PER MSDS.
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ALUMINUM CUTTING FLUID,A-9
Company: RELTON CORP
Street: 317 ROLYN PL
PO Box: 779
City: ARCADIA CA
Zipcode: 91007-2838
Health Emergency Phone: 213-681-2551
Date Of Label Review: 04/20/1999
Status Code: C
MFG Label NO: UNKNOWN
Label Date: 08/13/1996
Year Procured: 1996
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: NO
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: TARGET ORGANS: EYES, SKIN, RESPIRATORY AND
GASTROINTESTINAL TRACTS. ACUTE - EYES: MAY CAUSE IRRITATION. SKIN: MAY CAUSE
VERY SLIGHT IRRITATION. INHALE: VAPORS/MISTS MAY IRRITATE RESPIRATORY TRACT.
ORA L: MAY CAUSE NAUSEA. CHRONIC - UNKNOWN.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|