3M GENERAL OFFICES -- SILICONE-LUBRICANT, 78-8007-1728-8
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXDTB
MSDS NAME: SILICONE-LUBRICANT, 78-8007-1728-8
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Cas: 63148-62-9
RTECS #: JJ6484500
Name: DOW CORNING 200 FLUID; (SILICONE GREASE)
% Wt: 100
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: NO ADVERSE HEALTH EFFECTS ARE EXPECTED FROM EYE/SKIN
CONTACT, INHALATION EXPOSURE OR FROM SWALLOWING. SWALLOWING A RELATIVELY
LARGE AMOUNT OF THIS MATERIAL IS UNLIKELY TO PRODUCE SERIOUS ILLNESS OR DE
ATH.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) (FP N). EYES: IMMEDIATELY FLUSH EYES WITH
LARGE AMOUNTS OF WATER. GET IMMEDIATE MEDICAL ATTENTION. SKIN: FLUSH SKIN W
ITH LARGE AMOUNTS OF WATER. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
INGEST: DRINK TWO GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: OBSERVE PRECS FROM OTHER SECTIONS. COLLECT SPILLED
MATL. CLEAN UP RESIDUE W/APPROP SOLV SUCH AS METHYL ETHYL KETONE. EXTING ALL
IGNIT SOURCES & VENT AREA. FOLLOW MSDS RECOMS FOR CLEANUP SOLVENT. PLACE
IN U.S. DOT-APPROVED CONTAINER & SEAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE LARGE QUANTITIES IN AN INDUSTRIAL OR
COMMERCIAL INCINERATOR. DISPOSE OF WASTE PRODUCT IN A SANITARY LANDFILL.
SINCE REGULATIONS VARY, CONSULT APPLICABLE FEDERAL, STATE AND LOCAL
REGULATIONS OR AUTHORITIES BEFORE DISPOSAL.
Handling And Storage Precautions: KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: CC
Flash Point Text: >250F,>121C
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE
ANTICIPATED.
=======================================================
Control Measures
=======================================================
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: DO NOT INGEST.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.0
Solubility in Water: NIL
Appearance and Odor: LIGHT COLORED GREASE; NO ODOR.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE,
FORMALDEHYDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SILICONE-LUBRICANT, 78-8007-1728-8
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 03/24/1995
Status Code: C
Label Date: 03/24/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: None
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE AND CHRONIC: NONE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.