===================== Product Identification =====================
MSDS NAME:MIL-P-22750 34064 PTB D3925G002B PART 2 OF2
NIIN:01-053-2642
Kit Part:Y
MSDS Number: BJNNX
=== Responsible Party ===
Company:STEELCOTE MANUFACTURING CO
Address:3418 GRATIOT
City:ST LOUIS
State:MO
ZIP:63103
Country:US
Info Phone Num:314-771-8053
Emergency Phone Num:314-771-8053
Preparer's Name:BARBARA STELLER
CAGE:93981
=== Contractor Identification ===
Company:STEELCOTE MANUFACTURING COMPANY
Address:ONE STEELCOTE SQUARE
Box:City:ST LOUIS
State:MO
ZIP:63103-2920
Country:US
Phone:314-771-8053
CAGE:93981
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
CAS:25036-25-3
Fraction by Wt: 30%
Other REC Limits:NONE SPECIFIED
Name:PROPYLENE GLYCOL MONOMETHYL ETHER
CAS:107-98-2
RTECS #:UB7700000
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 30%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:N-BUTYL ACETATE (SARA III)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200STEL;9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS:111-15-9
RTECS #:KK8225000
Fraction by Wt: 11%
Other REC Limits:NONE SPECIFIED
OSHA PEL:S,100 PPM
ACGIH TLV:S, 5 PPM; 9192
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 8%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:440MG/KG ORAL/5000PPM INHAL/1.7 G/KGSKIN
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NARCOSIS, LUNG, LIVER AND KIDNEY
INJURY, NEUROTOXIC SYMPTOMS, CARDIAC ABNORMALTIES. NASAL,
RESPIRATORY, SKIN, EYE, GASTROINTESTINAL IRRITANT. SKIN SENSITIZOR,
ALLERGIC REACTION. EYE DAMAGE. OVEREXPOSU RE TO DUST CAN CAUSE LUNG
DAMAGE. CONTAINS A MATERIAL WHICH IS A SUSPECTED MUTAGEN.
Effects of Overexposure:INHALATION: DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA, HEADACHE, POSSIBLE UNCONSCIOUSNESS AND DEATH. SKIN:
DEFATTING, DERMATITIS. SKIN ABSORPTION: SAME AS INHALATION. EYE:
REDNESS, TEARING, BLURRING. INGES TION: NAUSEA, VOMITING AND
DIARRHEA. PULMONARY ASPIRATION: PNEUMONITIS-WHICH CAN BE FATAL.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE AND LUNG
DISORDERS MAY BE AGGRAVATED.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE SUBJECT TO FRESH AIR, ARTIFICIAL
RESPIRATION IF NEEDED. EYE: FLUSH WITH PLENTY OF WATER FOR 15
MINUTES. SKIN: WASH WITH SOAP AND WATER. INGESTION: DO NOT INDUCE
VOMITING. GET IMMEDI ATE MEDICAL ATTENTION AS NEEDED.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:20.0F,-6.7C
Lower Limits:1.1
Upper Limits:6.6
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:TOXIC FUMES, WEAR SELF-CONTAINED BREATHING
APPARATUS AND FULL TURN OUT GEAR. COOL FIRE EXPOSED CONTAINERS WITH
WATER.
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR/MAY TRAVEL BY
GROUND TO IGNITE SOURCES. AVOID SPREADING LIQ & FIRE BY WATER
FLOODING. SPECIAL HAZARD: MATERIAL FLOATS ON WATER.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES AND PROVIDE GOOD
VENTILATION. FOR A LARGE SPILL, WEAR APPROPRIATE RESPIRATORY
PROTECTION. DIKE SPILL AREA, SOAK UP WITH INERT ABSORBENT MATERIAL
AND PLACE IN CLOSED CONTAINE RS FOR PROPER DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:ALL CONTAINERS TO BE GROUNDED AND/OR
BONDED WHEN MATERIAL IS TRANSFERRED. DO NOT STORE ABOVE 120F.
Other Precautions:DO NOT CUT OR WELD NEAR THIS PRODUCT. CONTAINS
MATERIAL KNOWN TO BE HARMFUL TO THE STATE OF CALIFORNIA. CONTAINS
NUISANCE PARTICULATES WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY
DURING SANDING OR A BRADING OF THE DRIED FILM.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH APPROVED RESPIRATORY PROTECTIVE EQUIPMENT
OR SELF-CONTAINED BREATHING APPARATUS WHEN NEEDED.
Ventilation:EXPLOSION PROOF LOCAL EXHAUST VENTILATION AND MECHANICAL
VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDED.
Eye Protection:CHEMICAL SAFETY GOGGLES & FACE SHIELD.
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. OTHER EQUIPMENT
AS REQUIRED TO MINIMIZE EXPOSURE FROM PROLONGED OR REPEATED
CONTACT.
Work Hygienic Practices:WASH BEFORE EATING OR SMOKING. LAUNDER CLOTHES
AFTER USE. DISCARD CONTAMINATED LEATHER PRODUCTS. USE BARRIER
CREAM.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:175 TO 302F
Vapor Density:> THAN AIR
Spec Gravity:1.3 (H20=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:EPOXY COATING
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,LEWIS/MINERAL ACIDS,STRONG BASES/ALIPHATIC
AMINES,ALKALIS,NITRATES,CAUSTICS,ALDEHYDES & AMMONIA.
Stability Condition to Avoid:EXCESSIVE HEAT AND ANY SOURCE IF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, TRACES OF NH3, SO2,
CARBON DIOXIDE, VARIOUS HYDROCARBONS AND TOXIC FUMES.
==================== Disposal Considerations ====================
Waste Disposal Methods:COMPLY WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
BRAYCO 646;LUBRICATING PRODUCT
| 1809-20-7 |
|
CHO-BOND 1029 PART A (ADHESIVE) (SEE SUPP)
| |
|
MIL-H-17672D (2110TH)
| 64742-54-7 |
|
TURBO OIL 2389
| |
|
AQUA AMMONIA 26 DEG
| 1336-21-6
7732-18-5 |
|
AP-1006 WHITE FLEXIBLE PRIMER COATING
| 1330-20-7
108-88-3 |
|
140 1306 HRP DEVELOPER
| 7732-18-5
123-31-9
1310-58-3
111-46-6
55-55-1 |
|
ANAEROBIC ADHESIVE 822
| 81-07-2 |
|
BARE WIRE # 4043
| 60676-86-0
1309-37-1
7440-50-8
7439-96-5
1309-48-4
1314-13-2
13463-67-7
7429-90-5 |
|
TT-E-509, 21667 PEACH
| 107-87-9
7727-43-7
1314-13-2
8052-41-3
13463-67-7
14807-96-6 |
|
TIN LEAD ANTIMONY ALLOY,XM-200 CORE;#181
| 7439-92-1
7440-31-5
7440-36-0
8050-09-7 |
|
SUPERMIL GREASE NO.1371
| |
|
SBR BONDED COMPRESSED ASBESTOS HHP-46-E
| 12001-29-5 |
|
NFO B-20 LUBRICATING GREASE
| 64742-52-5 |
|
9A DRY FILM LUBRICANT MIL-L-46010B ;TYPE II
| 64-17-5
78-93-3
108-88-3
8002-09-3
12141-20-7
1309-64-4
1317-33-5
25036-25-3 |
|
PAINT, MARINE CORPS GREEN 34052, 1B2623
| 64475-85-0
75-09-2 |
|
ZINC DUST PIGMENTED PRIMER 10-P3-2/ EC-133
| 7440-66-6
108-88-3
67-63-0
78-93-3
67-63-0 |
|
187 9824 LIQUID DEVELOPER, PROCESS C-22, P
| 7732-18-5
107-21-1
100-51-6
25646-71-3
111-46-6 |
|
187 9824,LIQUID DEVELOPER,PROC C-22,PART B
| 7732-18-5
1332-77-0
1310-58-3
1330-43-4
7757-83-7 |
|
TYPE M, TYPE S TONER (PREMIX)
| 64742-48-9
8050-09-7
637-12-7
9011-15-8
128-37-0 |
|
LAMPS, ELECTRIC MERCURY VAPOR 1000 WATT
| 7439-97-6
7440-39-3
7440-70-2
1314-20-1
7440-33-7 |
|
1B15H AEROSOL, INSULATING COMPOUND
| 108-88-3
67-64-1
71-55-6
74-98-6
106-97-8 |
|
EXTREME PRESSURE LUBE #3 (TELEX # 39479-P16
| |
|
TERESSTIC N150 (TELEX P/N 39479-P8)
| |
|
VISCHEM 352 (TELEX P/N 39479-P15)
| |
|
MOLYKOTE 44 GREASE (TELEX P/N 39479-P9)
| |
|
BARE WIRE # 5554
| 60676-86-0
1309-37-1
7440-50-8
7439-96-5
1309-48-4
7440-47-3
1314-13-2
13463-67-7
7429-90-5 |
|
CONETHANE EN-7 PART B
| 94-96-2
63549-56-4 |
|
ELECTRIC STORAGE BATTERY
| 7439-92-1
7440-36-0
7664-93-9 |
|
CATIONIC HOMOPOLYMER,POLYMER LIQUID
| |
|
JET-LH 8018-C3 MR
| 65996-67-0
1317-65-3
7789-75-5
1344-09-8
13463-67-7
7439-96-5
8049-17-0
1344-28-1
7440-02-0
1314-13-2
1332-58-7
11114-46-8
7439-89-6 |
|
POS COLOR DEVELOPER
| 64-02-8
123-31-9 |
|
MIL-C-22750 30,000 PTA D39250100A PART 1OF2
| 67-63-0
123-86-4
111-15-9
78-93-3
108-88-3
1330-20-7
78-93-3 |
|
MIL-P-22750 34064 PTB D3925G002B PART 2 OF2
| 25036-25-3
107-98-2
1333-86-4
14807-96-6
123-86-4
111-15-9
108-88-3
1330-20-7
78-93-3 |
|
MIL-C-83286, 10049, 03BR054
| 111-15-9
12656-85-8
7758-97-6
78-93-3
141-78-6
108-65-6
77-58-7 |
|
CAT, MIL-C-83286, 10049, 03BR054CAT
| 111-15-9
108-10-1
107-87-9
28182-81-2
123-86-4
1330-20-7 |
|
NO. 2 DIESEL FUEL/FURNACE OIL/NO.2 FUEL OIL
| 91-20-3 |
|
HTH - CALCIUM HYPOCHLORITE,TECHNICAL
| 22464-76-2
7647-14-5
7732-18-5
10137-74-3
10043-52-4
1305-62-0
471-34-1 |
|
PACSIL,AUDIOCONE,ANTISEIZE COMPOUND
| 7440-21-3 |
|
"POLY-TEMP" TEFLON TAPE,ANTISEIZING
| 116-14-3 |
|
121 6506 KODALITH MPII DEVELOP./REPLINISH,B
| 111-42-2
7732-18-5
870-72-4
1332-77-0
140-01-2 |
|
ADHESIVE LCA-4LV
| 14807-96-6
112945-52-5
471-34-1
25068-38-6 |
|
LUBRICATE FMO SERIES
| 8012-95-1 |
|
DAPCO 3300 ADHESIVE,PART B
| 67-63-0
108-88-3 |
|
CHOKE AND CARBURETOR CLEANER
| 1330-20-7
78-93-3
111-76-2
124-38-9 |
|
NORCAST-A-4000,PART A,ADHESIVE
| 108-88-3 |
|
NORCAST A-4000,PART B,ADHESIVE
| |
|
CHO-BOND 1029 PART A (ADHESIVE) (SEE SUPP)
| |
|
CATALYST FOR 463-4-SERIES FLAT PART 2 0F 2
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
PEEL-COAT TYPE III,PLASTIC COATING (SUP DA)
| |
|
|