===================== Product Identification =====================
MSDS NAME:BARE WIRE # 4043
NIIN:00-892-4383
MSDS Number: BJNMS
=== Responsible Party ===
Company:NATIONAL WELDING ALLOYS, INC.
Address:1600 SOUTH CANAL STREET
City:PITTSBURGH
State:PA
ZIP:15215
Country:US
Info Phone Num:412-781-4255
Emergency Phone Num:412-781-4255
CAGE:0ACE2
=== Contractor Identification ===
Company:NATIONAL TORCH TIP CO INC.
Address:50 FREEPORT RD
City:PITTSBURGH
State:PA
ZIP:15215-2906
Country:US
Phone:412-781-4200
CAGE:93009
Company:NATIONAL WELDING ALLOYS INC
Address:1600 SOUTH CANAL STREET
Box:City:PITTSBURGH
State:PA
ZIP:15215-2624
Country:US
Phone:412-781-4255
CAGE:0ACE2
============= Composition/Information on Ingredients =============
Name:SILICA, CRYSTALLINE - FUSED
CAS:60676-86-0
RTECS #:VV7328000
Fraction by Wt: 4.5-6.0%
Other REC Limits:0.76 MG/M3 R
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293
Name:IRON OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 0.80%
Other REC Limits:NONE SPECIFIED
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.30%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0.05%
Other REC Limits:1 MG/M3 FUMES
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:MAGNESIUM OXIDE
CAS:1309-48-4
RTECS #:OM3850000
Fraction by Wt: 0.05%
Other REC Limits:15 MG/M3 FUME
OSHA PEL:15 MG/M3 PARTICULATE
ACGIH TLV:10 MG/M3;TDUST; 9293
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 0.10%
Other REC Limits:5 MG/M3 FUME
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 0.20%
Other REC Limits:15 MG/M3
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: >94%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192
===================== Hazards Identification =====================
LD50 LC50 Mixture:UNCLASSIFIED WELDING FUMES=5MG/M3 PEL
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HAZARD RESULTS FROM WELDING PROCESS.
NO HAZARD EXPECTED FROM SHIPPING/STORAGE. SHORT TERM EXPOSURE TO
WELDING FUMES, GASES OR DUST MAY RESULT IN DISCOMFORT, DIZZINESS,
NAUSEA AND DRYNESS OR IRRITATION OF THE THROAT. LONG TERM EXPOSURE
TO WELDING FUMES MAY CONTRIBUTE TO PULMONARY IRRITATION OR
PNEUMOCONIOSIS.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM ARE CONSIDERED
POSSIBLE CARCINOGENS UNDER OSHA. RESPIRATORY CANCER FROM WELDING IS
UNCONFIRMED.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE
NOTED. WATERY EYES, HEADACHE, BREA THING DIFFICULTY, FREQUENT
COUGHING AND/OR CHEST PAINS MAY OCCURE FROM ACUTE EXPOSURE. TOXIC
GASES CAN BE FATAL.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS
CONTAINED IN WELDING FUMES.
======================= First Aid Measures =======================
First Aid:IN CASE OF ELECTRICAL SHOCK, TURN OFF POWER PRIOR TO REMOVAL
FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM
EXPOSURE AREA AND CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF
BREATHING IS D IFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL
RESPIRATION. IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE.
EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:USE SUITABLE MEDIA FOR SURROUNDING FIRES.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:IF THIS MATERIAL IS REDUCED TO POWDER
FORM, CAUTION MUST BE USED TO PREVENT FIRE OR EXPLOSION. TO
EXTINGUISH A METAL POWDER FIRE, USE CLASS "D" EXTINGUISHER.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUES
AND PLACE IN SUITABLE DOT APPROVED CONTAINERS AND DISPOSE OF IN
FULL COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. AVOID
INHALATION AND SKIN EXPOSU RE.
====================== Handling and Storage ======================
Handling and Storage Precautions:WEAR GLOVES AND FLAME RETARDANT
CLOTHING WHEN CUTTING, GRINDING OR WELDING. DO NOT EXPOSE SKIN TO
RADIATION WHEN HOT CUTTING OR WELDING.
Other Precautions:PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN
ELECTRODES AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION
PRODUCTS GENERATED ARE DIFFERENT IN FORM FROM THE INGREDIENTS
LISTED. NEW COMPOUNDS NOT IN THE ELECTRODES MAY FORM.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE WELD FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN CUTTING, GRINDING OR WELDING IN A CONFINED SPACE OR
WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED LIMITS. USE ONLY NIOSH APPROVED RESPIRATORS.
Ventilation:USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WELDING AND HOT CUTTING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY.
THEIR COMPOSITION AND QUANTITY ARE DEPENDENT ON THE METAL BEING
WELDED, THE PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR
ELECTRODES USED. OTHER INFLUENCING FACTORS ARE THEPRESENCE OF
CONTAMINENTS. CHLORINATED SOLVENTS MAY DECOMPOSE TO TOXIC GASES.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NIL
Appearance and Odor:SOLID WIRE OR ROD,GREY TO SILVER IN COLOR, 0.030"
O.D.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND MINERAL ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING AND CUTTING OPERATION MAY
INCLUDE OXIDES OF THE METALS, CHROMATES, FLUORIDES, COMPLEX
METALLICS, AND OZONE.
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
BRAYCO 646;LUBRICATING PRODUCT
| 1809-20-7 |
|
CHO-BOND 1029 PART A (ADHESIVE) (SEE SUPP)
| |
|
MIL-H-17672D (2110TH)
| 64742-54-7 |
|
TURBO OIL 2389
| |
|
AQUA AMMONIA 26 DEG
| 1336-21-6
7732-18-5 |
|
AP-1006 WHITE FLEXIBLE PRIMER COATING
| 1330-20-7
108-88-3 |
|
140 1306 HRP DEVELOPER
| 7732-18-5
123-31-9
1310-58-3
111-46-6
55-55-1 |
|
ANAEROBIC ADHESIVE 822
| 81-07-2 |
|
BARE WIRE # 4043
| 60676-86-0
1309-37-1
7440-50-8
7439-96-5
1309-48-4
1314-13-2
13463-67-7
7429-90-5 |
|
TT-E-509, 21667 PEACH
| 107-87-9
7727-43-7
1314-13-2
8052-41-3
13463-67-7
14807-96-6 |
|
TIN LEAD ANTIMONY ALLOY,XM-200 CORE;#181
| 7439-92-1
7440-31-5
7440-36-0
8050-09-7 |
|
SUPERMIL GREASE NO.1371
| |
|
SBR BONDED COMPRESSED ASBESTOS HHP-46-E
| 12001-29-5 |
|
NFO B-20 LUBRICATING GREASE
| 64742-52-5 |
|
9A DRY FILM LUBRICANT MIL-L-46010B ;TYPE II
| 64-17-5
78-93-3
108-88-3
8002-09-3
12141-20-7
1309-64-4
1317-33-5
25036-25-3 |
|
PAINT, MARINE CORPS GREEN 34052, 1B2623
| 64475-85-0
75-09-2 |
|
ZINC DUST PIGMENTED PRIMER 10-P3-2/ EC-133
| 7440-66-6
108-88-3
67-63-0
78-93-3
67-63-0 |
|
187 9824 LIQUID DEVELOPER, PROCESS C-22, P
| 7732-18-5
107-21-1
100-51-6
25646-71-3
111-46-6 |
|
187 9824,LIQUID DEVELOPER,PROC C-22,PART B
| 7732-18-5
1332-77-0
1310-58-3
1330-43-4
7757-83-7 |
|
TYPE M, TYPE S TONER (PREMIX)
| 64742-48-9
8050-09-7
637-12-7
9011-15-8
128-37-0 |
|
LAMPS, ELECTRIC MERCURY VAPOR 1000 WATT
| 7439-97-6
7440-39-3
7440-70-2
1314-20-1
7440-33-7 |
|
1B15H AEROSOL, INSULATING COMPOUND
| 108-88-3
67-64-1
71-55-6
74-98-6
106-97-8 |
|
EXTREME PRESSURE LUBE #3 (TELEX # 39479-P16
| |
|
TERESSTIC N150 (TELEX P/N 39479-P8)
| |
|
VISCHEM 352 (TELEX P/N 39479-P15)
| |
|
MOLYKOTE 44 GREASE (TELEX P/N 39479-P9)
| |
|
BARE WIRE # 5554
| 60676-86-0
1309-37-1
7440-50-8
7439-96-5
1309-48-4
7440-47-3
1314-13-2
13463-67-7
7429-90-5 |
|
CONETHANE EN-7 PART B
| 94-96-2
63549-56-4 |
|
ELECTRIC STORAGE BATTERY
| 7439-92-1
7440-36-0
7664-93-9 |
|
CATIONIC HOMOPOLYMER,POLYMER LIQUID
| |
|
JET-LH 8018-C3 MR
| 65996-67-0
1317-65-3
7789-75-5
1344-09-8
13463-67-7
7439-96-5
8049-17-0
1344-28-1
7440-02-0
1314-13-2
1332-58-7
11114-46-8
7439-89-6 |
|
POS COLOR DEVELOPER
| 64-02-8
123-31-9 |
|
MIL-C-22750 30,000 PTA D39250100A PART 1OF2
| 67-63-0
123-86-4
111-15-9
78-93-3
108-88-3
1330-20-7
78-93-3 |
|
MIL-P-22750 34064 PTB D3925G002B PART 2 OF2
| 25036-25-3
107-98-2
1333-86-4
14807-96-6
123-86-4
111-15-9
108-88-3
1330-20-7
78-93-3 |
|
MIL-C-83286, 10049, 03BR054
| 111-15-9
12656-85-8
7758-97-6
78-93-3
141-78-6
108-65-6
77-58-7 |
|
CAT, MIL-C-83286, 10049, 03BR054CAT
| 111-15-9
108-10-1
107-87-9
28182-81-2
123-86-4
1330-20-7 |
|
NO. 2 DIESEL FUEL/FURNACE OIL/NO.2 FUEL OIL
| 91-20-3 |
|
HTH - CALCIUM HYPOCHLORITE,TECHNICAL
| 22464-76-2
7647-14-5
7732-18-5
10137-74-3
10043-52-4
1305-62-0
471-34-1 |
|
PACSIL,AUDIOCONE,ANTISEIZE COMPOUND
| 7440-21-3 |
|
"POLY-TEMP" TEFLON TAPE,ANTISEIZING
| 116-14-3 |
|
121 6506 KODALITH MPII DEVELOP./REPLINISH,B
| 111-42-2
7732-18-5
870-72-4
1332-77-0
140-01-2 |
|
ADHESIVE LCA-4LV
| 14807-96-6
112945-52-5
471-34-1
25068-38-6 |
|
LUBRICATE FMO SERIES
| 8012-95-1 |
|
DAPCO 3300 ADHESIVE,PART B
| 67-63-0
108-88-3 |
|
CHOKE AND CARBURETOR CLEANER
| 1330-20-7
78-93-3
111-76-2
124-38-9 |
|
NORCAST-A-4000,PART A,ADHESIVE
| 108-88-3 |
|
NORCAST A-4000,PART B,ADHESIVE
| |
|
CHO-BOND 1029 PART A (ADHESIVE) (SEE SUPP)
| |
|
CATALYST FOR 463-4-SERIES FLAT PART 2 0F 2
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
PEEL-COAT TYPE III,PLASTIC COATING (SUP DA)
| |
|
|