===================== Product Identification =====================
MSDS NAME:TURBO OIL 2389
NIIN:00-782-2627
MSDS Number: BJNMM
=== Responsible Party ===
Company:EXXON CO USA, A DIV OF EXXON CORP.
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Info Phone Num:713-656-2443
Emergency Phone Num:713-656-3424
CAGE:29700
=== Contractor Identification ===
Company:EXXON COMPANY U.S.A.
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 / 713-656-3424
CAGE:29700
============= Composition/Information on Ingredients =============
Name:BASE LUBRICANT OF POLYOL ESTER
Other REC Limits:NONE SPECIFIED
Name:PROPRIETARY ADDITIVES - TOTAL PERCENTAGE OF INGREDIENTS 1
AND 2 IS 100.
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 (ORAL RAT) IS 5000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:MAY CAUSE
IRRITATION.SKIN:PROLONGED/REPEATED SKIN CONTACT TENDS TO REMOVE
SKIN OILS AND CAUSE IRRITATION.IN ANIMALS HAS CAUSED SKIN
CANCER.PRODUCT HAS A LOW ORDER OF ACUTE ORAL AND DERMAL TO
XICITY,BUT MINUTE AMOUNTS ASPIRATED INTO THE LUNGS DURING INGESTION
OR VOMITING MAY CAUSE LUNG INJURY & POSSIBLY DEATH.
Explanation of Carcinogenicity:THE PRODUCT IS FORMULATED FROM BASE
STOCKS WHICH ARE SEVERELY/MILD HYDROTREATED,SEVERELY SOLVENT
EXTRACTED
Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
SKIN IRRITATION.
Medical Cond Aggravated by Exposure:NON RECOGNIZED.
======================= First Aid Measures =======================
First Aid:INHALATION:REMOVE TO FRESH AIR.GIVE OXYGEN/CPR IF NEEDED.GET
MEDICAL ATTENTION.EYE:FLUSH WITH WATER FOR 15 MINUTES OR UNTIL
IRRITATION SUBSIDES.IF IRRITATION PERSISTS,CALL A
PHYSICIAN.SKIN:REMOVE ANY CONTAMINATED CLOTHING AND WASH SKIN
THOROUGHLY WITH SOAP & WATER.INGESTION:DO NOT INDUCE VOMITING.CALL
A PHYSICIAN IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:400F,204C
Autoignition Temp:Autoignition Temp Text:723F
Lower Limits:1
Upper Limits:12
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, DRY CHEMICAL
AND VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:USE SUPPLIED-AIR BREATHING EQUIPMENT FOR
ENCLOSED/CONFINED SPACES WHEN FIGHTING FIRE OF THIS PRODUCT.USE
WATER SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
================== Accidental Release Measures ==================
Spill Release Procedures:RECOVER FREE PRODUCT.ADD SAND,EARTH OR OTHER
SUITABLE ABSORBENT TO SPILL AREA.MINIMIZE BREATHING VAPORS.MINIMIZE
SKIN CONTACT.OPEN ALL WINDOWS & DOORS.KEEP PRODUCT OUT OF SEWERS
AND WATERCOURSES BY DI KING OR IMPOUNDING,OTHERWISE CALL
AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL,DRY PLACE WITH
ADEQUATE VENTILATION.KEEP AWAY FROM OPEN FLAMES, HIGH TEMPERATURES
AND STRONG OXIDANTS.
Other Precautions:MINIMIZE BREATHING VAPOR,MIST OR FUMES.AVOID
PROLONGED/REPEATED SKIN CONTACT.LAUNDER/DRY-CLEAN CONTAMINATED
CLOTHING BEFORE RE-USE.REMOVE & CLEAN CONTAMINATED SHOES BEFORE
RE-USE.PRODUCT IS READILY RE MOVED FROM SKIN BY WATERLESS CLEANERS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
CONFINED OR ENCLOSED SPACES,IF NEEDED.
Ventilation:USE LOCAL EXHAUST TO CAPTURE VAPOR,MISTS OR FUMES,IF
NECESSARY.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY
SHOWER.CHEMICAL-RESISTANT APRON OR OTHER IMPERVIOUS CLOTHING.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
"EMPTY" CONTAINERS RETAIN RESIDUE AND CAN BE DANGEROUS.DO NOT
PRESSURIZE,CUT,WELD,BRAZE,SOLDER,DRILL,GRIND OR EXPOSE SUCH
CONTAINERS TO HEAT,FLAME,SPARKS,STATIC ELECTRICITY OR OTHER SOURCES
OF IGNITIO N;THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.DO NOT
CLEAN THEM.
================== Physical/Chemical Properties ==================
HCC:V6
Boiling Pt:B.P. Text:680F,360C
Melt/Freeze Pt:M.P/F.P Text:-76F,-60C
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.95
pH:NEUTR.
Evaporation Rate & Reference:<0.001(N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID,YELLOW COLOR,MILD FATTY ODOR
Percent Volatiles by Volume:NEGLIG
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS SUCH AS LIQUID CHLORINE,CONCENTRATED OXYGEN,SODIUM
HYPOCHLORITE OR CALCIUM HYPOCHLORITE
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:FUMES,SMOKE,CARBON MONOXIDE,ALDEHYDES
AND OTHER DECOMPOSITION PRODUCTS, IN THE CASE OF INCOMPLETE
COMBUSTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN AN APPROPRIATE DISPOSAL FACILITY
IN COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
BRAYCO 646;LUBRICATING PRODUCT
| 1809-20-7 |
|
CHO-BOND 1029 PART A (ADHESIVE) (SEE SUPP)
| |
|
MIL-H-17672D (2110TH)
| 64742-54-7 |
|
TURBO OIL 2389
| |
|
AQUA AMMONIA 26 DEG
| 1336-21-6
7732-18-5 |
|
AP-1006 WHITE FLEXIBLE PRIMER COATING
| 1330-20-7
108-88-3 |
|
140 1306 HRP DEVELOPER
| 7732-18-5
123-31-9
1310-58-3
111-46-6
55-55-1 |
|
ANAEROBIC ADHESIVE 822
| 81-07-2 |
|
BARE WIRE # 4043
| 60676-86-0
1309-37-1
7440-50-8
7439-96-5
1309-48-4
1314-13-2
13463-67-7
7429-90-5 |
|
TT-E-509, 21667 PEACH
| 107-87-9
7727-43-7
1314-13-2
8052-41-3
13463-67-7
14807-96-6 |
|
TIN LEAD ANTIMONY ALLOY,XM-200 CORE;#181
| 7439-92-1
7440-31-5
7440-36-0
8050-09-7 |
|
SUPERMIL GREASE NO.1371
| |
|
SBR BONDED COMPRESSED ASBESTOS HHP-46-E
| 12001-29-5 |
|
NFO B-20 LUBRICATING GREASE
| 64742-52-5 |
|
9A DRY FILM LUBRICANT MIL-L-46010B ;TYPE II
| 64-17-5
78-93-3
108-88-3
8002-09-3
12141-20-7
1309-64-4
1317-33-5
25036-25-3 |
|
PAINT, MARINE CORPS GREEN 34052, 1B2623
| 64475-85-0
75-09-2 |
|
ZINC DUST PIGMENTED PRIMER 10-P3-2/ EC-133
| 7440-66-6
108-88-3
67-63-0
78-93-3
67-63-0 |
|
187 9824 LIQUID DEVELOPER, PROCESS C-22, P
| 7732-18-5
107-21-1
100-51-6
25646-71-3
111-46-6 |
|
187 9824,LIQUID DEVELOPER,PROC C-22,PART B
| 7732-18-5
1332-77-0
1310-58-3
1330-43-4
7757-83-7 |
|
TYPE M, TYPE S TONER (PREMIX)
| 64742-48-9
8050-09-7
637-12-7
9011-15-8
128-37-0 |
|
LAMPS, ELECTRIC MERCURY VAPOR 1000 WATT
| 7439-97-6
7440-39-3
7440-70-2
1314-20-1
7440-33-7 |
|
1B15H AEROSOL, INSULATING COMPOUND
| 108-88-3
67-64-1
71-55-6
74-98-6
106-97-8 |
|
EXTREME PRESSURE LUBE #3 (TELEX # 39479-P16
| |
|
TERESSTIC N150 (TELEX P/N 39479-P8)
| |
|
VISCHEM 352 (TELEX P/N 39479-P15)
| |
|
MOLYKOTE 44 GREASE (TELEX P/N 39479-P9)
| |
|
BARE WIRE # 5554
| 60676-86-0
1309-37-1
7440-50-8
7439-96-5
1309-48-4
7440-47-3
1314-13-2
13463-67-7
7429-90-5 |
|
CONETHANE EN-7 PART B
| 94-96-2
63549-56-4 |
|
ELECTRIC STORAGE BATTERY
| 7439-92-1
7440-36-0
7664-93-9 |
|
CATIONIC HOMOPOLYMER,POLYMER LIQUID
| |
|
JET-LH 8018-C3 MR
| 65996-67-0
1317-65-3
7789-75-5
1344-09-8
13463-67-7
7439-96-5
8049-17-0
1344-28-1
7440-02-0
1314-13-2
1332-58-7
11114-46-8
7439-89-6 |
|
POS COLOR DEVELOPER
| 64-02-8
123-31-9 |
|
MIL-C-22750 30,000 PTA D39250100A PART 1OF2
| 67-63-0
123-86-4
111-15-9
78-93-3
108-88-3
1330-20-7
78-93-3 |
|
MIL-P-22750 34064 PTB D3925G002B PART 2 OF2
| 25036-25-3
107-98-2
1333-86-4
14807-96-6
123-86-4
111-15-9
108-88-3
1330-20-7
78-93-3 |
|
MIL-C-83286, 10049, 03BR054
| 111-15-9
12656-85-8
7758-97-6
78-93-3
141-78-6
108-65-6
77-58-7 |
|
CAT, MIL-C-83286, 10049, 03BR054CAT
| 111-15-9
108-10-1
107-87-9
28182-81-2
123-86-4
1330-20-7 |
|
NO. 2 DIESEL FUEL/FURNACE OIL/NO.2 FUEL OIL
| 91-20-3 |
|
HTH - CALCIUM HYPOCHLORITE,TECHNICAL
| 22464-76-2
7647-14-5
7732-18-5
10137-74-3
10043-52-4
1305-62-0
471-34-1 |
|
PACSIL,AUDIOCONE,ANTISEIZE COMPOUND
| 7440-21-3 |
|
"POLY-TEMP" TEFLON TAPE,ANTISEIZING
| 116-14-3 |
|
121 6506 KODALITH MPII DEVELOP./REPLINISH,B
| 111-42-2
7732-18-5
870-72-4
1332-77-0
140-01-2 |
|
ADHESIVE LCA-4LV
| 14807-96-6
112945-52-5
471-34-1
25068-38-6 |
|
LUBRICATE FMO SERIES
| 8012-95-1 |
|
DAPCO 3300 ADHESIVE,PART B
| 67-63-0
108-88-3 |
|
CHOKE AND CARBURETOR CLEANER
| 1330-20-7
78-93-3
111-76-2
124-38-9 |
|
NORCAST-A-4000,PART A,ADHESIVE
| 108-88-3 |
|
NORCAST A-4000,PART B,ADHESIVE
| |
|
CHO-BOND 1029 PART A (ADHESIVE) (SEE SUPP)
| |
|
CATALYST FOR 463-4-SERIES FLAT PART 2 0F 2
| 123-86-4
111-76-2
71-36-3
67-63-0
78-93-3 |
|
PEEL-COAT TYPE III,PLASTIC COATING (SUP DA)
| |
|
|