Search   
MSDS  : TT-E-529F, BROWN 20117,X9358
CAS  : 108-88-3
67-64-1
1330-20-7
74-98-6
75-28-5
106-97-8
NAME  : toluene (sara iii)
acetone (sara iii)
xylenes (o-,m-,p- isomers) (sara iii)
propane
isobutane mixture (propellant)
butane
non-hazardous ients
===================== Product Identification =====================

MSDS NAME:TT-E-529F, BROWN 20117,X9358
NIIN:00-181-7371
MSDS Number: BJXHR
=== Responsible Party ===
Company:PLASTIC-KOTE COMPANY, INC.
Address:1000 LAKE RD.
City:MEDINA
State:OH
ZIP:44256
Country:US
Info Phone Num:216-725-1511
Emergency Phone Num:216-725-1511
CAGE:EO411
=== Contractor Identification ===
Company:PLASTIC-KOTE COMPANY, INC.
Address:1000 LAKE RD.
City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:216-725-1511
CAGE:EO411
Company:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
Box:City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:330-725-4511
CAGE:07708

============= Composition/Information on Ingredients =============

Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 30-35%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ACETONE (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 10-15%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 15-20%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 22%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Name:ISOBUTANE MIXTURE (PROPELLANT)
CAS:75-28-5
RTECS #:TZ4300000
Other REC Limits:NONE SPECIFIED

Name:BUTANE
CAS:106-97-8
RTECS #:EJ4200000
Fraction by Wt: 15-20%
Other REC Limits:NONE SPECIFIED
OSHA PEL:800 PPM
ACGIH TLV:800 PPM; 9192

Name:NON-HAZARDOUS INGREDIENTS
Other REC Limits:NONE SPECIFIED

===================== Hazards Identification =====================

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS CAUSE PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. SEVERE
OVEREXPOSURE IN LAB ANIMALS HAS ALSO CAUSED LIVER ABNORMALITIES AND
DAMAGE TO KIDNEYS, LUNGS AND SPLEEN. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING AND INHALING CONTENTS MAY BE HARMFUL OR
FATAL.
Effects of Overexposure:BREATHING:CAN CAUSE NASAL AND RESPIRATORY
IRRITATION,DIZZINESS WEAKNESS,FATIGUE,NAUSEA,HEADACHE,POSSIBLE
UNCONSCIOUSNESS/ASPHYXIATION.EYE:CAN CAUSE SEVERE
IRRITATION,REDNESS,TEARING,BLURRED VISION.SWA LLOWING:CAN CAUSE
GASTROINTESTINAL IRRITATION, NAUSEA,VOMITING,DIARRHEA.SKIN:CAN
CAUSE IRRITATION FOR SOME PERSONS.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY AND
OR SKIN REACTION.

======================= First Aid Measures =======================

First Aid:BREATHED:REMOVE TO FRESH AIR.BREATHING DIFFICULT,GIVE
OXYGEN.BREATHING STOPPED,GIVE CPR/SEEK MED HELP.EYES:FLUSH W/WATER
FOR 15 MINUTES WHILE OCCASIONALLY HOLD EYELIDS OPEN.GET MED
ATTN.SWALLOWED:DO N OT INDUCE VOMITING(ASPIRATION OF MAT INLUNGS
CAN CAUSE CHEMICAL PNEUMONITIS,WHICH CAN BE FATAL).KEEP WARM,QUIET
AND GET MED ATTN/POISON CONTROL CENTER.SKIN:WASH WITH
SOAP/WATER/CLEANER.WASH CLOTHES.

===================== Fire Fighting Measures =====================

Lower Limits:1.0
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:H2O INEFFECT.USE H2O TO COOL CLOSED CONTAINER
TO PREVENT PRESS BUILD-UP/AUTO-INGIT/EXPLOSION IN HIGH HEAT.IF H2O
USED,FOG NOZZLE PREFERRED.WEAR SCBA W/FACEPIECE
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPLODE/AUTOIGNIT WHEN
EXPOSED TO HIGH HEAT.VAPORS TRAVEL ALONG GROUND/MOVED BY
VENT/IGNITED BY PILOT LIGHT,FLAMES DISTANT FROM HANDLING.

================== Accidental Release Measures ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABOSRBENT OR OTHER
ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.

====================== Handling and Storage ======================

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F, IN
DIRECT SUNLIGHT OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:NONE

============= Exposure Controls/Personal Protection =============

Respiratory Protection:TO AVOID BREATHING VAPOR/SPRAY MIST,OPEN
WINDOW/DOOR/OTHER MEANS TO ENSURE FRESH AIR ENTRY DURING
APPLICATION/DRY.IF YOU EXPERIENCE EYE
WATER,HEADACHES/DIZZINESS,INCREASE FRESH AIR.WEAR RESPIRATORY PR
OTECTION(NIOSH/MSHA TC23C)/LEAVE AREA.
Ventilation:PROVIDE SUFFICIENT MECHANICAL(GENERAL)/LOCAL EXHAUST
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:CHEMICAL RESISTANT SUCH AS NEOPRENE.
Eye Protection:CHEMICAL SPLASH GOGGLES PER OSHA REGS
Other Protective Equipment:WHERE SPECIAL OR UNUSUAL CONDITIONS EXIST,
THE EXPERT ASSISTANCE OF AN INDUSTRIAL HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
WITH ALL CHEMICALS, MINIMIZE PERSONAL CONTACT AND BREATHING VAPORS.
Supplemental Safety and Health
*EVAP RATE GREATER THAN BUTYL ACETATE.

================== Physical/Chemical Properties ==================

HCC:V3
Boiling Pt:B.P. Text:133 TO 331F
Melt/Freeze Pt:M.P/F.P Text:1500F,816C
Vapor Density:> 1
Spec Gravity:< 1
Evaporation Rate & Reference:SLOWER THAN ETHER*
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT
Percent Volatiles by Volume:85-90

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS,
ETC., WHEN BURNED.

==================== Disposal Considerations ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
DOW CORNING (R) S-2260 PRIME COAT 8030-30-6
2768-02-7
682-01-9
5593-70-4
2157-45-1
PRO-SEAL 870, CLASS A, BASE 108-88-3
9003-35-4
PROSEAL 870 ALL CLASS & TYPES, ACCELERATOR 13423-61-5
102-06-7
1313-13-9
EASY FLO 3;AWS SPEC.AS 8,3AG-3 7440-22-4
7440-50-8
7440-66-6
7440-43-9
7440-02-0
ACTIVATOR BA-5 68187-11-1
112945-52-5
REMOVER FLOOR POLISH 6834-92-0
ETHYL ACETATE 141-78-6
MOLYLUBE 1200
L-TEC TUNGSTEN ELECTRODES 7440-33-7
1314-20-1
7440-67-7
AMMONIA INHALANT SOLUTION,NDC 00839-0076-99,U 1-24 7664-41-7
64-17-5
AK-024 CARPET CLEANER
SCOTCHGARD(TM) BRAND PROTECTOR FOR FABRICS 71-55-6
124-38-9
109-87-5
75-65-0
78-92-2
DOW CORNING(R)3145RTV ADHES SEALANT-CLEAR 68909-20-6
1185-55-3
13463-67-7
PETROLEUM BASED RUST PREVENTATIVE 124-38-9
8052-41-3
64742-53-6
OXALIC ACID 144-62-7
GSA TYPE I SWEEPING COMPOUND 8002-05-9
9004-34-6
112945-52-5
AA1550 WAX, LIQUID 8052-41-3
S-8 SOLVENT 108-88-3
108-65-6
SCOTCH-WELD(R)EPOXY ADHESIVE 2214 REGULAR 7429-90-5
63231-67-4
150-68-5
598-94-7
GLYPTAL AIR DRY ENAMEL 1201 1330-20-7
8030-30-6
64741-41-9
WAX, FLOOR, WATER-EMULSION TYPE 7732-18-5
68441-17-8
8002-26-4
90-43-7
128-37-0
100-37-8
78-51-3
1336-21-6
PRIMER COATING 724222 EPOXY POLYAMIDE 108-88-3
78-83-1
107-98-2
7789-06-2
13463-67-7
14807-96-6
14808-60-7
63231-67-4
SODIUM SULFITE, CRYSTAL 3888, 3922 7757-83-7
SCOTCH-WELD2216B/A PT A GRAY EPOXY ADHESIVE 1332-58-7
1333-86-4
SCOTCH-WELD(TM)2216 B/A PT B GRAY EPOXY ADH 25068-38-6
1318-74-7
PLASTIC PLASTISOL
ADHESIVE-SCOTCH-WELD (R) 2216 A GRAY 1302-76-7
1333-86-4
ADHESIVE-SCOTCH-WELD (R) 2216 B GRAY 80-05-7
1302-76-7
RTV159, SILICONE SEALANT 4253-34-3
ECCOBOND 45 CLEAR
CATALYST 15 CLEAR 112-24-3
PR-1431-G AND GT, PART A 13423-61-5
14307-33-6
PR-1431-G, TYPE I, PART B 9003-35-4
25068-38-6
108-88-3
13423-61-5
RTVS 51 WHITE, RS-0051-610000-A
CAT 2, RC-0002-660000-B
2-TON CLEAR EPOXY HARDENER 140-31-8
25154-52-3
2-TON CLEAR EPOXY RESIN 25068-38-6
12 7439-89-6
7439-96-5
13463-67-7
1312-76-1
1344-09-8
TT-V-71H, FLOOR AND TRIM VARNISH 64742-88-7
THERMOMETER,MERCURY 7439-97-6
AMYL ACETATE PRIMARY 628-63-7
CLEANING COMPOUND, SOLVENT DETERGENT 111-76-2
106-89-8
CLEANING COMPOUND SOLVENT DETERGENT 1310-58-3
111-76-2
6834-92-0
68412-54-4
CLEANER-DEGREASER DG1 67-56-1
9016-45-9
1303-96-4
533-96-0
25155-30-0
7732-18-5
SCOTCH-WELD(TM)1838-A EPOXY ADHESIVE(GREEN) 68410-23-1
1318-74-7
112-24-3
112945-52-5
SCOTCH-WELD 1838-B EPOXY ADHESIVE (GREEN) 25068-38-6
1332-58-7
68953-58-2
1317-65-3
13463-67-7
SCOTCH-WELD (R) EPOXY ADHESIVE 2214 REGULAR 7429-90-5
63231-67-4
150-68-5
598-94-7
GLYPTAL-G7526F 8030-30-6
110-80-5
1330-20-7
64741-41-9
138-86-3
THERMOFIT S-1009 ADHESIVE 25068-38-6
112945-52-5
68410-23-1
140-31-8
TT-E-529F, BROWN 20117,X9358 108-88-3
67-64-1
1330-20-7
74-98-6
75-28-5
106-97-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net