===================== Product Identification =====================
MSDS NAME:ENLUST QD STY ALKYD GREEN 34558
NIIN:00-828-3193
MSDS Number: BJZDP
=== Responsible Party ===
Company:PRATT AND LAMBERT INC, INDUSTRIAL COATINGS DIV.
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:716-873-6000/800-255-3924 DOT EMERG
Preparer's Name:W. A. PRATT
CAGE:61196
=== Contractor Identification ===
Company:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:VM&P NAPHTHA (LFL: 0.9; UFL: 6.7)
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 25%
Other REC Limits:NONE SPECIFIED
OSHA PEL:300 PPM/400 PPM STEL
ACGIH TLV:300 PPM/1350 MG/M3
Name:N-BUTYL ACETATE (SARA III)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: < 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200STEL;9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:VM&P NAPHTHA (VAPOR PRESSURE 40 MM HG @ 20C) (LFL: 1.0;
UFL: 6.0)
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:300 PPM/400 PPM STEL
ACGIH TLV:300 PPM/1350 MG/M3
Name:SILICA, CRYSTALLINE - CRISTOBALITE
CAS:14464-46-1
RTECS #:VV7325000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.05 MG/M3 RDUST9293
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 15%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 20%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:LEAD CHROMATE (SARA 313) (*CEILING)
CAS:7758-97-6
RTECS #:GB2975000
Fraction by Wt: < 1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.05 MG/M3/.1 MG/M3*
ACGIH TLV:0.05 MG/M3
Name:VOC: 4.25 LB/GAL LESS WATER & *NPRS; 510 G/L LESS WATER;
CALCULATED (*NEGLIGIBLY PHOTOCHEMICALLY REACTIVE MATERIALS)
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED
Name:VOC: 11.93 LB/GAL SOLIDS; 1432 G/L SOLIDS; CALCULATED
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INGEST/INHALE/EYE/SKIN: IRRITATION
(GASTROINTEST, NOSE, THROAT, EYE, SKIN). CNTRL NERVE SYS
DEPRESSION. SKIN DEFATTING. LUNG ASPIRATION: CHEMICAL PNEUMONITIS,
MAY BE FATAL. OVEREXPOSURE: (LUNG) PNEUMO CONIOSIS,LUNG CANCER,
LIVER DAMAGE, BLOOD FORMING, URINARY, REPRODUCTIVE, BRAIN & NERVOUS
SYS DAMAGE. "METAL FUME FEVER"
Explanation of Carcinogenicity:CHROMIUM/COMPOUNDS/LEAD
CHROMATE:POTENTIAL CARCINOGEN. CRYSTALLINE SILICA:LIMITED EVIDENCE
OF CARCINOGENICITY IN HUMANS.
Effects of Overexposure:INGEST: NAUSEA AND VOMITING. INHALE: HEADACHES,
DIZZINESS, NAUSEA, CONFUSION. CHRONIC OVEREXPOSURE: NO APPETITE,
METALLIC TASTE IN MOUTH, ANXIETY, CONSTIPATION, NAUSEA, WEAKNESS,
INSOMNIA, HEADACHE, M USCLE AND JOINT PAIN, FINE TREMORS, NUMBNESS,
HYPERACTIVITY AND COLIC. FLU-LIKE: FEVER, CHILLS, AND COUGH.
Medical Cond Aggravated by Exposure:PRE-EXISTING RESPIRATORY CONDITIONS
MAY BE AGGRAVATED BY CRYSTALLINE SILICA. PRE-EXISTING KIDNEY
CONDITONS MAY BE AGGRAVATED BY LEAD. TOLUENE CAUSES KIDNEY, LUNG &
SPLEEN DAMAGE IN LAB ANIMALS.
======================= First Aid Measures =======================
First Aid:INGEST: DO NOT INDUCE VOMITING. CALL POISON CONTROL,
EMERGENCY ROOM OR PHYSICIAN IMMEDIATELY. INHALE: REMOVE TO FRESH
AIR IMMEDIATELY. GIVE ARTIFICIAL RESPIRATION IF NEEDED. KEEP WARM &
QUIET. GET IMM EDIATE MEDICAL AID. EYE: FLUSH THOROUGHLY WITH LARGE
AMOUNT OF WATER FOR 15 MIN. GET MEDICAL AID. SKIN: REMOVE
CONTAMINATED CLOTHES. WASH AFFECTED AREA W/SOAP & WATER. PERSIST
IRRITATION/MEDICAL AID.
===================== Fire Fighting Measures =====================
Flash Point:20.0F,-6.7C
Lower Limits:0.9
Upper Limits:7.6
Extinguishing Media:NFPA CLASS B (CO2, ALL PURPOSE DRY CHEMICAL/ALCOHOL
FOAM) FOR FLAMMABLE LIQUID FIRES. PREFER POLYMER FOAM FOR LARGE
FIRE
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, MAY BE USE TO COOL
CONTAINER (FOG NOZZLE PREFERABLE). PREVENT PRESSURE BUILD-UP,
AUTO-IGNITE OR EXPLOSION WHEN EXPOSED EXTREME HEAT.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY
NOT BE IMMEDIATELY APPARENT. GET MEDICAL ATTENTION.
================== Accidental Release Measures ==================
Spill Release Procedures:KEEP SPECTATORS AWAY. ELIMINATE ALL IGNITE
SOURCES. DIKE, CONTAIN & REMOVE WITH INERT MATERIAL (SAND, EARTH,
ETC). USE COVERED METAL CONTAINERS FOR RECOVERY AND DISPOSAL. USE
NON-SPARKING TOOLS. PREVE NT CONTAMINATION OF SEWERS, STREAMS &
GROUNDWATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 100F. LARGE
QUANTITY STORAGE: COMPLY WITH OSHA 29CFR1910.106. DO NOT TAKE
INTERNALLY. DO NOT REUSE CONTAINERS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED AND BONDED TO THE
RECEIVING CONTAINER. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER.
NEVER USE PRESSURE TO EMPTY. DRUM IS NOT A PRESSURE VESSEL. KEEP
CONTAINERS CLOSED WH EN NOT IN USE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESTRICTED AREA: NIOSH APPR'D CHEMICAL CARTRIDGE
RESPIRATOR. SPRAYING: MECHANICAL PREFILTER MAY BE REQUIRED.
CONFINED AREAS: NIOSH/MSHA APPR'D AIR SUPPLIED RESPIRATOR. EXCEEDED
TLV AREA: NIOSH/MSHA AP PR'D RESPIRATOR W/RIGHT PROTECT FACTOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION IN SUFFICIENT
VOLUME & PATTERN TO KEEP CONCENTRATIONS BELOW EXPOSURE LIMITS.
Protective Gloves:REPEAT/PROLONG USE: IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:DO NOT BREATHE SANDING DUST. WASH HANDS AND
FACE BEFORE EATING OR DRINKING. REMOVE ANY DECOMPOSITION PRODUCTS
FROM AREA.
Supplemental Safety and Health
HAZARDOUS/POSSIBLE HAZARDOUS INGREDIENTS/WASTE. REFER TO OSHA 29CFR1910
FOR SAFETY/PROTECTIVE REQUIREMENTS. WELDING, BRAZING OR TORCH
CUTTING MATERIALS COATED WITH THIS PRODUCT MAY PRODUCE METAL OXIDE
S.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:203 TO 300F
Vapor Density:> THAN AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Appearance and Odor:PAINT
Percent Volatiles by Volume:64
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS. OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (> THAN 100F) AND
SOURCES OF IGNITION.
Hazardous Decomposition Products:SMOKE, CARBON MONOXIDE, CARBON
DIOXIDE. OXIDES OF: CHROMIUM AND LEAD MAY BE GENERATED.
==================== Disposal Considerations ====================
Waste Disposal Methods:FOLLOW FEDERAL, STATE & LOCAL REGULATIONS &
LAWS. INCINERATE IN EPA PERMITTED FACILITY. DO NOT INCINERATE
CLOSED CONTAINERS. USE PRECAUTIONS FOR DISPOSAL OF FLAMMABLE
MATERIALS-D001. USE HAZARDOUS WAS TE LANDFILL FOR USED ABSORBENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|