Search   
MSDS  
:
 DELRIN ACETAL RESIN, 500F NC010
CAS  
:
 9002-81-7
NAME  
:
 polyoxymethylene, polyacetal
additives; antioxidants, lubricants & stabilizers.
=====================  Product Identification  =====================

MSDS NAME:DELRIN ACETAL RESIN, 500F NC010
NIIN:00N015401
MSDS Number: BKQCV
=== Responsible Party ===
Company:E. I. DUPONT DE NEMOURS & CO INC
Address:1007 MARKET STREET
City:WILMINGTON
State:DE
ZIP:19898
Country:US
Info Phone Num:800-441-7515
Emergency Phone Num:800-441-3637;800-424-9300(CHEMTREC)
Preparer's Name:J B ARMITAGE
CAGE:73925
=== Contractor Identification ===
Company:DU PONT E I  DE NEMOURS AND CO INC   PETROCHEMICALS DEPT
Address:1251 BRANDYWINE BLDG
Box:City:WILMINGTON
State:DE
ZIP:19898
Phone:302-773-5676
CAGE:73925
Company:E.I. DUPONT DE NEMOURS & CO
Address:1007 MARKET STREET
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-7515;800-441-9442
CAGE:18873

=============  Composition/Information on Ingredients  =============

Name:POLYOXYMETHYLENE, POLYACETAL
CAS:9002-81-7

Name:ADDITIVES; ANTIOXIDANTS, LUBRICANTS & STABILIZERS.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INGEST: NOT A PROBABLE ROUTE
    OF EXPOSURE. SKIN: NOT TOXIC. HOT POLYMER WILL CAUSE THERMAL BURNS.
    EYE: MECH IRRIT. INHAL: FORMALDEHYDE IS HIGHLY IRRIT TO EYES &
    UPPER RESP TRACT. (CHRONIC) FORM ALDEHYDE RELEASED IN SM QTY DURING
    MELTPROCESSING IS CLASSIFIED AS AN ANIMAL CARCINOGEN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PREEXISTING
    DISEASES OF THE LUNGS MAY HAVE INCREASED SUSCEPTIBILITY TO THE
    TOXICITY OF EXCESSIVE EXPOSURE TO FORMALDEHYDES.

=======================  First Aid Measures  =======================

First Aid:IF EXPOSED TO FUMES FROM OVERHEATING OR COMBUSTION, MOVE TO
    FRESH AIR. CONSULT A PHYSICIAN IF SYMPTOMS PERSIST. FLUSH EYES WITH
    PLENTY OF WATER FOR AT LEAST 15 MIN. CONSULT A PHYSICIAN IF
    SYMPTOMS PER SIST. IF MOLTEN POLYMER CONTACTS SKIN, COOL RAPIDLY
    WITH COLD WATER. DO NOT ATTEMPT TO PEEL POLYMER FROM SKIN. OBTAIN
    MEDICAL ATTN FOR THERMAL BURN.

=====================  Fire Fighting Measures  =====================

Flash Point:612F,322C
Extinguishing Media:WATER, CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT  FOR PROTECTION FROM FUMES OF FORMALDEHYDE.
Unusual Fire/Explosion Hazard:BURNS WITH A COLORLESS FLAME. DELRIN DUST
    CLOUD IGNITION TEMPERATURE 440C.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP TO PREVENT A SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DRY STORAGE. KEEP CNTNRS CLSD TO PVNT
    CONTAM. OPEN CNTNRS ONLY IN WELL-VENT AREA. READ "SAFETY PREC TO
    OBSERVE WHEN HANDLING MOLTEN (SEE OTHER PREC)
Other Precautions:HNDLG/STOR PREC: DELRIN ACETAL RESIN" E-49703 AND
    "SAFETY PREC" IN MOLDING MANUAL E-09143, BEFORE USING DELRIN. AVOID
    PROLONGED HEATING ABOVE MELTING POINT (178C).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN  IF LOCAL EXHAUST VENT DOES NOT KEEP
    FORMALDEHYDE CONC BELOW 1 PPM.
Ventilation:LOCAL EXHAUST AT PROCESSING EQUIPMENT.
Protective Gloves:PROTECTIVE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVE COTTON SHIRT AND LONG PANTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FL PT METH: ASTM 1929-62. HAZ DECOMP PRODS: 1 PPM, (8 HR TWA), & SHORT
    TERM EXPOS LIMIT OF 2 PPM (15 MINUTE).

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:342F,172C
Spec Gravity:1.42
Solubility in Water:INSOLUBLE
Appearance and Odor:GRANULES OR POWDER WITH SLIGHT FORMALDEHYDE ODOR.

=================  Stability and Reactivity Data  =================

STRONG ACIDS AND BASES (DECOMPOSES FORMING FORMALDEHYDE). STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:HEATING ABOVE 230C - FORMS FORMALDEHYDE.
Hazardous Decomposition Products:CO & FORMALDEHYDE. FORMALDEHYDE IS
    CLASSIFIED AS AN ANIMAL CARCIN, & HAS AN OSHA PERMISSIBLE EXPOS LIM
    OF (SUPP DATA)

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATION OR LANDFILL IN COMPLIANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
TEFLON TOPCOATS (455-123) 112-34-5
102-71-6
64742-95-6
1309-37-1
1313-13-9
TEFLON TOPCOATS (455-127) 112-34-5
102-71-6
64742-95-6
1309-37-1
1313-13-9
TEFLON TOPCOATS (455-155) 112-34-5
102-71-6
64742-95-6
13463-67-7
1309-37-1
1313-13-9
TEFLON TOPCOATS (455-153) 112-34-5
102-71-6
64742-95-6
1309-37-1
1313-13-9
TEFLON TOPCOATS (455-160) 112-34-5
102-71-6
64742-95-6
TEFLON TOPCOATS (455-201) 64742-95-6
13463-67-7
12001-26-2
112-34-5
102-71-6
TEFLON PRIMERS, 850-302 151-21-3
108-88-3
13463-67-7
TEFLON TOPCOATS, 455-1127 112-34-5
102-71-6
64742-95-6
1333-86-4
TEFLON TOPCOATS, 455-1123 112-34-5
102-71-6
64742-95-6
1309-37-1
1333-86-4
ALUMINON, A-546 569-58-4
BROMOPHENOL BLUE, B-392 115-39-9
CADMIUM REF STD SOLUTION 7440-43-9
7697-37-2
7732-18-5
CALCIUM CARBONATE, C-64 471-34-1
BUFFER SOLUTIONS, SO-B-109 7558-79-4
7778-77-0
7758-11-4
12125-02-9
50-00-0
7732-18-5
SODIUM POTASSIUM TARTRATE, TETRAHYDRATE, S- 6381-59-5
CESIUM SULFATE, C-27 10294-54-9
CERIUM (IV) SULFATE, C-265 13590-82-4
CALCIUM SULFIDE, C-142 1344-81-6
CARBON BLACK, C-278 1333-86-4
METHYL RED, M-296 493-52-7
METHYLENE BLUE, M-235 61-73-4
MINERAL OIL, 0122 8012-95-1
MOLYBDENUM REF STD SOLN 1000 PPM MO, SM113 1313-27-5
7647-01-0
7697-37-2
7732-18-5
MUREXIDE INDICATOR TABLETS, M273 7447-40-7
3051-09-0
CHROMIUM, C-317 7440-47-3
DELRIN ACETAL RESIN 100D NC010 9002-81-7
DELRIN ACETAL RESIN, 100 NC010 9002-81-7
DELRIN ACETAL RESIN, 100CL NC010 9002-81-7
DELRIN ACETAL RESIN, 100F NC010 9002-81-7
DELRIN ACETAL RESIN, 107 NC010 9002-81-7
DELRIN ACETAL RESIN, 150SA NC010 9002-81-7
DELRIN ACETAL RESIN, 200PL NC010 9002-81-7
DELRIN ACETAL RESIN, 500 NC010 9002-81-7
DELRIN ACETAL RESIN, 500D NC010 9002-81-7
DELRIN ACETAL RESIN, 500CL NC010 9002-81-7
DELRIN ACETAL RESIN, 500F NC010 9002-81-7
DELRIN ACETAL RESIN, 500 HP NC010 9002-81-7
DELRIN ACETAL RESIN, 507 NC010 9002-81-7
DELRIN ACETAL RESIN, 550SA NC010 9002-81-7
DELRIN ACETAL RESIN, 900 NC010 9002-81-7
DELRIN ACETAL RESIN, 900CL NC010 9002-81-7
DELRIN ACETAL RESIN, 900D NC010 9002-81-7
DELRIN ACETAL RESIN, 900F NC010 9002-81-7
DELRIN ACETAL RESIN, 900HP NC010 9002-81-7
DELRIN ACETAL RESIN, 1700HP NC010 9002-81-7
DELRIN ACETAL RESIN, DE9011 NC010 9002-81-7
DELRIN ACETAL RESIN, DE9096 NC010 9002-81-7
DELRIN ACETAL RESIN, DE9155 NC010 9002-81-7
DELRIN ACETAL RESIN, DE9242 NC010 9002-81-7
DELRIN ACETAL RESIN, MFR1 9002-81-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com