===================== Product Identification =====================
MSDS NAME:MYLAR, POLYESTER FILM
NIIN:00F008076
MSDS Number: BBZGF
=== Responsible Party ===
Company:WESCO ELECTRICAL CO.
Address:201 MUNSON ST
City:GREENSVILLE
State:MA
ZIP:01301
Info Phone Num:(413) 774-4358
Emergency Phone Num:(413) 774-4358
Preparer's Name:W. C. PERCIVAL
CAGE:12673
=== Contractor Identification ===
Company:WESCO ELECTRICAL
Address:201 MUNSON ST
Box:City:GREENVILLE
State:MA
ZIP:01301
Phone:(413) 774-4358
CAGE:12673
============= Composition/Information on Ingredients =============
Name:NON-HAZARDOUS FOR INGREDIENTS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: LOW TOXICITY. INHALATION:
NOT VOLATILE. IRRITATING VAPORS MAY BE RELEASED AT TEMPERATURES
>235C. SKIN: NOT IRRITANT. EYE: NOT A LIKELY ROUTE OF EXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: LOW TOXICITY. INHALATION: IRRITATING
VAPORS MAY BE RELEASED AT TEMPERATURES >235C.
======================= First Aid Measures =======================
First Aid:INHALATION: IF EXPOSED TO FUMES FROM OVERHEATING OR FROM
COMBUSTION, REMOVE TO FRESH AIR.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER, DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IF
EXPOSED TO FUMES.
Unusual Fire/Explosion Hazard:DURING PROCESSING FILM CAN PICK UP STRONG
STATIC CHARGE. DISCHARGE INTO DUST OR SOLVENT LADEN AIR MAY CAUSE
FLASH FIRE OR EXPLOSION.
================== Accidental Release Measures ==================
Spill Release Procedures:PICK UP FILM TO PREVENT A SLIPPING HAZARD.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED
Ventilation:NORMAL VENTILATION EXCEPT AT TEMP >235C WHERE LOCAL EXHAUST
IS REQUIRED.
Protective Gloves:FOR HANDLING HOT FILM
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:RECOMMENDED FOR GOOD INDUSTRIAL SAFETY
PRACTICE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, FILM
Percent Volatiles by Volume:0.8%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & BASES.
Hazardous Decomposition Products:CO2, CO, ACROLEIN, & ALDEHYDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:LANDFILL PREFERRED. FORCED DRAFT INCINERATION IS
AN ALTERNATE. DISPOSAL METHOD MUST CONFORM TO FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|