===================== Product Identification =====================
MSDS NAME:LUBRI-BOND 220 MIL L 23398D TYPE II
NIIN:00-468-2000
MSDS Number: BKYLD
=== Responsible Party ===
Company:ELECTROFILM MFG CO
Address:25395 RYE CANYON RD
Box:55669
City:VALENCIA
State:CA
ZIP:91355-5000
Country:US
Info Phone Num:805-257-2242
Emergency Phone Num:805-257-2242
Preparer's Name:CARL GREEN
CAGE:85932
=== Contractor Identification ===
Company:ELECTROFILM MFG CO
Address:27727 AVE SCOTT
Box:55669
City:VALENCIA
State:CA
ZIP:91355
Country:US
Phone:805-257-2242
CAGE:85932
============= Composition/Information on Ingredients =============
Name:TOLUENE (IARC CARC- GROUP 3) *97-2*
CAS:108-88-3
RTECS #:XS5250000
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:PROPANE (DIMETHYLMETHANE) *97-2*
CAS:74-98-6
RTECS #:TX2275000
Other REC Limits:1800 MG/CUM
OSHA PEL:1000 PPM
ACGIH TLV:SIMPLE ASPHYXIANT
Name:2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL
CELLOSOLVE, BUTYL GLYCOL, GLYCOL ETHER EB *97-2*
CAS:111-76-2
RTECS #:KJ8575000
Other REC Limits:25 PPM (SKIN)
OSHA PEL:50 PPM (SKIN)
ACGIH TLV:25 PPM (SKIN)
Name:MOLYBDENUM DISULFIDE
CAS:1317-33-5
RTECS #:QA4697000
OSHA PEL:15 MG/CUM AS (MO)
ACGIH TLV:10 MG/CUM AS (MO)
Name:EPOXY RESIN
Name:XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *97-2*
CAS:1330-20-7
RTECS #:ZE2100000
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:DICHLOROMETHANE (METHYLENE CHLORIDE) (SUSP HUMAN CARC BY
ACGIH, SUSP ANIM CARC BY IARC GROUP 2B, SUSP CARC BY NTP)*97-2*
CAS:75-09-2
RTECS #:PA8050000
OSHA PEL:500 PPM
ACGIH TLV:174 MG/CUM (A2)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ANTIMONY TRIOXIDE, ANTIMONY OXIDE (SUSP CARCINOGEN BY
ACGIH, ANIMAL CARCINOGEN IARC - GROUP 2B) *97-2*
CAS:1309-64-4
RTECS #:CC5650000
ACGIH TLV:0.5 MG/CUM (A2)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:LEAD HYPOPHOSPHITE *97-2*
CAS:10294-58-3
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION: ANESTHETIC. DEATH BY
ASPHYXIATION IS POSSIBLE. SKIN: MAY CAUSE IRRITATION. PROLONGED
EXPOSURE MAY CAUSE LIVER, KIDNEY & HEAT DAMAGE.
Explanation of Carcinogenicity:METHYLENE CHLORIDE & ANTIMONY TRIOXIDE
(ONLY BY ACGIH) ARE A2 SUSPECTED HUMAN CARCINOGENS.
Effects of Overexposure:ASPHYXIATION, NARCOSIS, IRRITATION
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:-20F TO -30F
Lower Limits:2.3
Upper Limits:9.5
Extinguishing Media:CO2, FOAM
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
CLOSED AREAS.
Unusual Fire/Explosion Hazard:HEATED CANS MAY EXPLODE, KEEP COOL IF
POSSIBLE.
================== Accidental Release Measures ==================
Spill Release Procedures:BLOT UP W/ABSORBENT MATERIAL. SEAL IN
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID STORAGE >80F. PRESSURIZED CAN,
DON'T INCINERATE. PUNCTURE W/CAUTION. USE IN WELL VENTILATED AREA.
Other Precautions:AVOID SKIN CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE AN ORGANIC FUME & VAPOR RESPIRATOR.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
EXPLOSION-PROOF.
Protective Gloves:RECOMMENDED
Eye Protection:FULL SAFETY GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:-43.7F
Vapor Density:1.5-2.6
Spec Gravity:1.15-1.3
Evaporation Rate & Reference:(BUTYL ACETATE=1): 12.5
Solubility in Water:<0.1%
Appearance and Odor:DARK GRAY W/PAINT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:FLAMES/HOT SURFACES & HIGH
HEAT/TEMPERATURES
Hazardous Decomposition Products:PHOSGENE GAS AT HIGH TEMPERATURES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. PRESSURIZED CAN, DON'T INCINERATE. PUNCTURE
W/CAUTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|