===================== Product Identification =====================
MSDS NAME:AMS5776 347 SS CORROSION & HEAT RESISTANT WELD WIRE
NIIN:00-454-2769
MSDS Number: BKYKW
=== Responsible Party ===
Company:UNITED STATES WELDING CORPORATION
Address:20700 DEARBORN STREET
City:CHATSWORTH
State:CA
ZIP:91311
Info Phone Num:(818) 341-2021
Emergency Phone Num:(818) 341-2021
Preparer's Name:JORGE JACOBS
CAGE:58401
=== Contractor Identification ===
Company:UNITED STATES WELDING CORP
Address:3579 HWY 50 E SUITE 104
Box:City:CARSON CITY
State:NV
ZIP:89701-2807
Country:US
Phone:775-883-7878
CAGE:58401
============= Composition/Information on Ingredients =============
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 12.5%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:GRAPHITE, SYNTHETIC
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: 0.15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION: DISCOMFORT, DIZZINESS,
NAUSEA, DRYNESS & IRRITATION OF NOSE & THROAT, HEADACHE, BREATHING
DIFFICULTY, COUGHING, CHEST PAINS, PULMONARY EDEMA, ASPHYXIATION,
NEUROLOGICAL DAMAGE, LUNG FIBROS IS, PNEUMOCONSIS, LUNG DISEASES, &
FATAL. SKIN: IRRITATION. EYES: WATERING.
Explanation of Carcinogenicity:CHROMIUM IS CONSIDERED TO BE AN A1
CONFIRMED CARCINOGEN.
Effects of Overexposure:INHALATION: DISCOMFORT, DIZZINESS, NAUSEA,
DRYNESS & IRRITATION OF NOSE & THROAT, HEADACHE, BREATHING
DIFFICULTY, COUGHING, CHEST PAINS, PULMONARY EDEMA, ASPHYXIATION,
FATAL, NEUROLOGICAL DAMAGE, LUNG FIBROSIS, PNEUMOCONSIS, & LUNG
DISEASE. SKIN: IRRITATION. EYES: WATERING.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTION, AIRWAY
DISEASES & CONDITIONS SUCH AS ASTHMA, EMPHYSEMA, OR CHRONIC
BRONCHITIS
======================= First Aid Measures =======================
Eyes: WASH W/LARGE AMOUNTS OF WATER. SKIN: WASH W/SOAP OR
MILD DETERGENT & WATER FOR 5 MINS. INHALATION: REMOVE TO FRESH AIR.
ADMINISTER OXYGEN OR GIVE ARTIFICIAL RESPIRATION IF NECESSARY. IF
PULSE IS N'T DETECTED, BEGIN EXTERNAL HEART MASSAGE. INGESTION:
OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:USE FIRE FIGHTING METHODS THAT ARE APPROPRIATE
FOR THE SURROUNDNG FIRE.
Unusual Fire/Explosion Hazard:MOLTEN METAL ALLOYS MAY EXPLODE/REACT
VIOLENTLY ON CONTACT W/WATER.
================== Accidental Release Measures ==================
Spill Release Procedures:IN SOLID FORM, THIS MATERIAL POSES NO SPECIAL
CLEAN-UP PROBLEMS. PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:THE WARNING PROPERTIES OF THE
SUBSTANCE ARE AS A GAS, VAPOR, DUST, OR MIST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH APPROVED RESPIRATORS.
Ventilation:LOCAL EXHAUST: TO CONTROL EXPOSURE TO AIRBORNE FUMES.
Protective Gloves:FLAME-PROOF WELDING
Eye Protection:SAFETY GLASSES UNDER WELDING HELMET
Other Protective Equipment:APRON FOR WELDING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Solubility in Water:INSOLUBLE
Appearance and Odor:FILLER METAL, ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MOLTEN METAL ALLOYS MAY REACT VIOLENTLY W/WATER, RUST, & CERTAIN METAL
OXIDES SUCH AS OXIDES OF COPPER, IRON & LEAD
Hazardous Decomposition Products:METAL FUMES
==================== Disposal Considerations ====================
Waste Disposal Methods:PRIOR TO DISPOSAL CONSIDER IF MATERIAL HAS
RECOVERY VALUE. DISCARD ANY PRODUCT IN ACCEPTABLE MANNER. DISPOSE
OF ALL WASTES IN ACCORDANCE W/FEDERAL, STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|