===================== Product Identification =====================
MSDS NAME:TURBALOY 718
NIIN:01-003-1114
MSDS Number: BKYQT
=== Responsible Party ===
Company:UNITED STATES WELDING CORPORATION
Address:20700 DEARBORN STREET
City:CHATSWORTH
State:CA
ZIP:91311
Country:US
Info Phone Num:(818) 341-2021
Emergency Phone Num:(818) 341-2021
Preparer's Name:JORGE JACOBS
CAGE:58401
=== Contractor Identification ===
Company:UNITED STATES WELDING CORP
Address:3579 HWY 50 E SUITE 104
Box:City:CARSON CITY
State:NV
ZIP:89701-2807
Country:US
Phone:775-883-7878
CAGE:58401
============= Composition/Information on Ingredients =============
Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Other REC Limits:1 MG/CUM
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 19%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 3%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293
Name:TITANIUM (DRY POWDER) (TI)
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 0.9%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM
Name:COLUMBIUM, NIOBIUM
CAS:7440-03-1
Fraction by Wt: 5.1%
Other REC Limits:5 MG/CUM
Name:TANTALUM
CAS:7440-25-7
RTECS #:WW5505000
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3; DUST; 9192
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 0.5%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 18%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DISCOMFORT SUCH AS
DIZZINESS, NAUSEA, DRYING OR IRRITATION OF NOSE/THROAT, HEADACHE,
BREATHING DIFFICULTY, FREQUENT COUGHING & CHEST PAINS. SOME TOXIC
GASES MAY CAUSE PULMONARY EDEMA, ASPH YXIATION & EXCESSIVE EXPOSURE
CAN BE FATAL. EYES: WATER. SKIN: IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: MAY RESULT IN NEUROLOGICAL DAMAGE,
LUNG FIBROSIS, PNEUMOCONSIS & OTHER LUNG DISEASES. EYES: WATERING.
SKIN: IRRITATION.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTION, AIRWAY
DISEASES & CONDITIONS SUCH AS ASTHMA, EMPHYSEMA, BRONCHITIS.
======================= First Aid Measures =======================
Eyes: WASH W/LARGE AMOUNTS OF WATER. SKIN: WASH AREA W/SOAP
OR MILD DETERGENT FOR 5 MINS. INHALATION: REMOVE TO FRESH AIR,
ADMINISTER OXYGEN IF RESPIRATION IS DIFFICULT. IF NOT BREATHING
BEGIN ARTIFIC IAL RESPIRATION. IF PULSE NOT DETECTED BEGIN EXTERNAL
HEART MESSAGE. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:SOLID FORM ISN'T COMBUSTIBLE UNDER NORMAL
CONDITIONS, USE FIRE FIGHTING METHODS THAT ARE APPROPRIATE FOR THE
SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:MOLTEN METAL ALLOYS MAY EXPLODE ON
CONTACT W/WATER, THEY MAY ALSO REACT VIOLENTLY W/WATER, RUST,
CERTAIN METAL OXIDES, OXIDES OF COPPER, IRON, LEAD.
================== Accidental Release Measures ==================
Spill Release Procedures:IN SOLID FORM THIS POSES NO SPCIAL CLEAN-UP
PROBLEMS.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE PRECAUTION & SAFETY IN WELDING &
CUTTING.
Other Precautions:WARNING PROPERTIES OF SUBSTANCE AS A GAS, VAPOR,
DUST, OR MIST ARE WAYS TO DETECT THIS SUBSTANCE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH APPROVED RESPIRATORS.
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP
Protective Gloves:FLAMEPROOF WELDING
Eye Protection:SAFETY GLASSES UNDER WELDING HELMET
Other Protective Equipment:APRON
Work Hygienic Practices:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS FILLER METAL.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:METAL FUMES
==================== Disposal Considerations ====================
Waste Disposal Methods:IN ACCORDANCE W/LOCAL, STATE, & FEDERAL
REGULATIONS. DISCARD ANY PRODUCT IN ACCEPTABLE MANNER. PREVENT
WASTE FROM CONTAMINATING SURROUNDING ENVIRONMENT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|