===================== Product Identification =====================
MSDS NAME:P4 ECONOLINE FILMS
NIIN:01-049-5089
MSDS Number: BKYRK
=== Responsible Party ===
Company:ANITEC IMAGE CORPORATION
Address:40 CHARLES STREET
Box:4444
City:BINGHAMTON
State:NY
ZIP:13902
Info Phone Num:(607) 774-3242
Emergency Phone Num:(607) 774-3242 OR 774-3300
CAGE:61263
=== Contractor Identification ===
Company:ANITEC IMAGE CORP
Address:40 CHARLES ST
Box:4444
City:BINGHAMTON
State:NY
ZIP:13902
Country:US
Phone:607-774-3333
CAGE:61263
============= Composition/Information on Ingredients =============
Name:SILVER CHLORIDE
CAS:9007-35-6
RTECS #:VW3675000
ACGIH TLV:10 MG/CUM
Name:SILVER BROMIDE
CAS:7785-23-1
ACGIH TLV:10 MG/CUM
Name:GELATIN, GELATINE
CAS:9000-70-0
RTECS #:LX8580000
Name:CADMIUM CHLORIDE (SARA III)
CAS:10108-64-2
RTECS #:EV0175000
Fraction by Wt: TRACE
OSHA PEL:SEE 1910.1027
ACGIH TLV:0.05 MG(CD)/M3; 9293
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:POLYESTER
Fraction by Wt: >90%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: THIS PRODUCT CONTAINS SMALL
AMOUNTS OF A CADIUM SALT & MAY CAUSE LOCALIZED IRRITATION.
Explanation of Carcinogenicity:CADMIUM IS A SUSPECTED 2B CARCINOGEN.
Effects of Overexposure:SKIN: THIS PRODUCT CONTAINS SMALL AMOUNTS OF A
CADMIUM SALT & MAY CAUSE LOCALIZED IRRITATION.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE FROM SOURCE OF EXPOSURE. SKIN: WASH
THOROUGHLY W/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:WATER MIST, ALCOHOL FOAM, CO2, OR DRY CHEMICAL
================== Accidental Release Measures ==================
Spill Release Procedures:UNEXPOSED FILM SHEETS MAY BE REPACKAGED FOR
FUTURE USE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE AWAY FROM
HEAT, RADIATION OR LIGHT SOURCES. DON'T IMMERSE INTO WATER OR
CHEMICALS PRIOR TO PROCESSING.
Other Precautions:AVOID EXPOSURE TO SOLUTIONS & INHALATION OF
COMBUSTION FUMES.
============= Exposure Controls/Personal Protection =============
Protective Gloves:DISPOSABLE COTTON
Work Hygienic Practices:WASH HANDS AFTER HANDLING FILM/FOLLOWING
EXPOSURE TO FILM PROCESSING SOLUTIONS.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Evaporation Rate & Reference:(BU AC = 1): NEGLIGIBLE
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY EMULSION COATED FILM W/NO DISTINGUISHING ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, LIGHT & OTHER RADIATION SOURCES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL OF FILM & FILM PROCESSING SOLUTIONS
SHOULD BE MADE IN CONFORMANCE W/APPLICABLE LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|