===================== Product Identification =====================
MSDS NAME:ECCOFOAM PT-24 PART A
NIIN:00N020393
Kit Part:Y
MSDS Number: BLKHB
=== Responsible Party ===
Company:EMERSON AND CUMING INC
Address:77 DRAGON COURT
City:WOBURN
State:MA
ZIP:01888
Country:US
Info Phone Num:617-935-4850; 617-938-8630
Emergency Phone Num:617-935-4850; 617-938-8630
CAGE:OB562
=== Contractor Identification ===
Company:EMERSON & CUMING,INC., DIV OF W.R.GRACE AND CO.
Address:61 HOLTON STREET
Box:City:WOBURN
State:MA
ZIP:01180
Country:US
Phone:800-225-1936
CAGE:0JMR7
Company:EMERSON AND CUMING, INC,
Address:77 DRAGON CT.
City:WOBURN
State:MA
ZIP:01888-5000
Country:US
Phone:617-935-4850/617-938-8630
CAGE:OB562
============= Composition/Information on Ingredients =============
Name:EPICHLOROHYDRIN (SARA III)
CAS:106-89-8
RTECS #:TX4900000
Fraction by Wt: <3% PPM
Other REC Limits:5 PPM (MFR)
OSHA PEL:S, 5 PPM
ACGIH TLV:S, 2 PPM; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:BISPHENOL A/EPICHLOROHYDRIN-BASED EPOXY RESIN
Fraction by Wt: 100%
Name:MINERAL FILLER (NON-HAZARDOUS)
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:VAPS @ EXCESSIVELY HIGH
TEMPS MAY PRDCE IRRIT OF NOSE & THROAT. EYE:IRRIT UPON DIRECT
CNTCT. SKIN:IRRIT UPON DIRECT CNTCT. PRLNG EXPOS MAY RESULT IN
SENSIT. INGEST:HARMFUL IF SWALLOWED. CH RONIC:EPICHLOROHYDRIN HAS
BEEN REPORTEDTO PRDCE CANCER IN LAB ANIMALS & TO PRDCE MUTAGENIC
CHANGES IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:EPICHLOROHYDRIN:NTP GRP 2, IARC GRP 2A.
Effects of Overexposure:HLTH HAZ:BACTERIA & CULTURED HUMAN CELLS. ALL
EVID TO DATE IN ONGOING EPIDEMIOLOGY STUDY OF EPICHLOROHYDRIN
WORKERS HAS BEEN REPORTED TO SHOW WEAK EVID THAT EXPOS TO
EPICHLOROHYDRIN POSES CANCER RISK TO HUMANS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHL:REMOVE TO FRESH AIR. EYE:IMMED FLUSH W/ WATER FOR @ LST
15 MIN; GET MD. SKIN:REMOVE CONTAM CLTHG. WASH AFFECTED AREA
W/WATER. INGEST:DILUTE W/LG QTYS OF WATER; INDUCE VOMIT ONLY IF
VICTIM IS CONS CIOUS & ALERT. GET IMMED MED ATTN.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:120F,49C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG. TREAT AS CLASS
B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE EVOLVED UPON EXPOSURE
TO HEAT OR OPEN FLAME.
================== Accidental Release Measures ==================
Spill Release Procedures:SM SPILLS:SCRAPE/SHOVEL ABSORBED WASTE/ ABSORB
INTO CNTNRS. SCRUB AREA W/SOAPY H20 & RINSE. LG SPILLS:TURN ON ALL
VENT EQUIP IN AREA TO EVACUATE FUMES. SCRAPE/SHOVEL ABSORBED
WASTE/ABSORB INTO CNTNRS. SCRUB AREA W/SOAPY H2O & RINSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP AWAY
FROM HEAT, SPARKS OR OPEN FLAME. KEEP CONTAINER CLOSED WHEN NOT IN
USE. AVOID SKIN & EYE CONTACT.
Other Precautions:AVOID BREATHING VAPORS. USE ONLY WITH ADEQUATE
VENTILATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:USE W/GOOD LOCAL VENT. FLEXIBLE DUCTWORK SHOULD EXTEND TO
AREAS OF HIGH CONC TO PREVENT LOCAL BUILDUP OF VAPOR.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING IF DIRECT CONTACT
LIKELY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MATLS TO AVOID:MERCAPTANS, ANHYDRIDES. IN RXN W/MANY CURING AGENTS,
CONSIDERABLE HEAT MAY BE EVOLVED, POSSIBLY LEADING TO EVOLUTION OF
SMOKE &/OR TOXIC FUMES.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:<1
Vapor Density:>AIR
Spec Gravity:0.4-0.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OFF-WHITE PASTE
Percent Volatiles by Volume:NEGLIG
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, AMINES, AMIDES, STRONG LEWIS/MINERAL ACIDS,
THIOSULFATES, CARBOXYLIC ACIDS, ALCOHOL, (SEE SUPP DATA)
Stability Condition to Avoid:STORAGE IN OPEN CNTNRS, EXPOS TO HEAT &/OR
OPEN FLAME, EXPOS TO INCOMPATIBLE SUBSTANCES.
Hazardous Decomposition Products:CO, CO2, HYDROCARBONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF ALL SPILLED MATERIAL & WATER RINSES
I/ A/W CURRENT STATE, LOCAL & FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CEL GLOSS-CLEAR (OLD E-26), BCEG026
| 108-88-3
67-63-0
111-15-9
1330-20-7 |
|
BRAYCOTE MICRONIC 803 HIGH TEMPERATURE HIGH
| |
|
ALUMINUM ALLOY 5086 (ROLLED PRODUCT)
| 7429-90-5
7440-21-3
1309-37-1
7440-50-8
7439-96-5
1309-48-4
7440-47-3
1314-13-2
13463-67-7 |
|
MAINTAIN CONCLEN
| |
|
PREP-A-LUBE
| 75-09-2 |
|
ONE STEP COLOR BLACK LIQUID, T-270C
| 8002-05-9
8002-05-9
64741-44-2
8006-64-2 |
|
MPG-2 AEROSOL
| 71-55-6
74-98-6
110-54-3
75-28-5 |
|
INTERPON 600 SERIES ZINC PRIMER JW102U PRIM
| 2451-62-9
13463-67-7
7440-66-6 |
|
HYDROSEP
| 18472-51-0 |
|
CADIUM SULFIDE IN LINSEED OIL
| 1306-23-6 |
|
THERMO-CHEM G-11
| 65997-17-3 |
|
DOLPHON
| 131-17-9 |
|
XTRACTION 11
| 111-76-2 |
|
PATHMAKER
| |
|
GU2500 INSL-THANE LINE, GU2512
| 8032-32-4
64-17-5 |
|
SPAULDITE, G-11-963
| |
|
RAGE, 106
| 100-42-5
14807-96-6 |
|
TACK FREE, 301
| 100-42-5
14807-96-6 |
|
TACK FREE, 297
| 100-42-5
14807-96-6 |
|
SIMONIZ TUFF STUFF FOAM CLEANER, AS192
| 111-76-2
10213-79-3
68439-50-9
75-28-5 |
|
601-87 2844-1109 COMPONENT A, 13-141
| 25068-38-6
64742-95-6
67762-90-7
1309-38-2 |
|
601-87 2844-1110 COMPONENT A, 13-142
| 64742-95-6
67762-90-7
20344-49-4
25068-38-6 |
|
601-87 2844-1111 COMPONENT A, 13-140
| 25068-38-6
64742-95-6
67762-90-7
1309-37-1 |
|
601-89 COMPONENT B, 13-143
| 68443-08-3
71-36-3
64742-47-8
67762-40-7 |
|
IP MARINE OIL G 30
| |
|
VALVATA OIL J680, 63053
| 64742-57-0
9003-27-4
68153-11-1 |
|
OMALA OIL 320, 65107
| 64742-70-7
64742-54-7
64742-57-0 |
|
ELECTRICALLY CONDUCTIVE COATING 599-A8219-(
| 7440-50-8
108-88-3
78-93-3
123-42-2
67-64-1
67-56-1 |
|
FERROUS ETHYLENEDIAMMONIUM SULFATE, 41
| 63589-59-3 |
|
MAGNESIUM PERCHLORATE, ANHYDROUS
| 10034-81-8 |
|
GERERATOR SOLUTION, 1613
| 109-86-4
7446-09-5
7553-56-2 |
|
LEAD PERCHLORATE HYDRATED
| 13637-76-8 |
|
AMMONIUM PERCHLORATE, 3
| 7790-98-9 |
|
BELZONA N.F. CLEANER/DEGREASER
| 71-55-6 |
|
EMULSIFIED ASPHALT MASTIC COMPOUND
| 8052-42-4
7732-18-5 |
|
HYDROCHLORIC ACID CONCENTRATED R-0616
| 7647-01-0 |
|
M-P-A 2000X, 32118
| 1330-20-7 |
|
DEGREASER HEAVY
| 1310-58-3
1310-73-2 |
|
SUPERCLEANS
| |
|
ECCOFOAM PT-24 PART A
| 106-89-8 |
|
ECCOFOAM PT-24 PART B BROWN
| |
|
RM 695 PRIMER-HARDENER
| 25513-64-8 |
|
RM 695 PRIMER-RESIN
| 25068-38-6
2425-79-8 |
|
SIKADUR 36 MARINE GEL PART A, 364
| 14808-60-7 |
|
2-3-DIPHOSPHOGLYCERIC ACID KIT, 35-A
| 9032-62-6
102-71-6
76-03-9
64-17-5 |
|
DIPICOLINIC ACID, D0759
| 499-83-2 |
|
DISTAMYCIN A HYDROCHLORIDE FROM STREPTOMYCE
| 6576-51-8 |
|
2,2'-DITHIO-BIS (5-NITROPYRIDINE), D9634
| 2127-10-8 |
|
DL-OCTOPAMINE HCL, 00250
| 770-05-8 |
|
CUSTOM PLASMA STANDARD, PLB9-3X
| |
|
|