Search   
MSDS  
:
 ARALDITE LY 556 -- KIT P/N TL5493
CAS  
:
 25036-25-3
NAME  
:
 bisphenol a epoxy resin
=====================  Product Identification  =====================

MSDS NAME:ARALDITE LY 556 -- KIT P/N TL5493
NIIN:01-252-8348
Kit Part:Y
MSDS Number: BLZHX
=== Responsible Party ===
Company:M AND T CHEMICALS INC FURANE PRODUCTS DIVISION
Address:5121 SAN FERNANDO RD W
City:LOS ANGELES
State:CA
ZIP:90039-1011
Country:US
Info Phone Num:818-247-6210
Emergency Phone Num:818-247-6210
CAGE:76323
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORP, N. A. / PERFORMANCE
    POLYMERS
Address:5121 SAN FERNANDO RD WEST
Box:City:LOS ANGELES
State:CA
ZIP:90039-1011
Country:US
Phone:818-247-6210/800-873-1138
CAGE:99384
Company:DOWTY AEROSPACE CORP
Address:SULLY RD
Box:5000
City:STERLING
State:VA
ZIP:22170
Country:US
Phone:703-450-8200
CAGE:93366
Company:M AND T CHEMICALS INC SUB OF AMERICAN CAN CO
Box:1104
City:RAHWAY
State:NJ
ZIP:07065-1104
Country:US
CAGE:76323

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A EPOXY RESIN
CAS:25036-25-3
Fraction by Wt: 100% %
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:> 10000 MG/KG ORAL LD50 (RATS)
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:STRONG IRRITANT TO SKIN IN UNCURED
    STATE. STRONG EYE IRRITANT. NOT ACCUTELY HARMFUL BY INGESTION. NOT
    EXPECTED TO BE AN INHALATION HAZARD.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
    CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:EYE IRRITATION, SKIN IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN CONTACT: IMMEDIATELY REMOVE LIQUIDS BY WIPING WITH
    DISPOSABLE TOWELS AND THEN CLEANSE THE SKIN WITH RESIN-REMOVING
    CREAM, FOLLOWED BY WASHING WITH SOAPY WATER. DO NOT USE SOLVENTS.
    EYE: IMMEDIATE LY FLUSH WITH WATER FOR 15 MINUTES. INHALATION:
    REMOVE TO FRESH AIR. INGESTION: IMMEDIATELY RINSE MOUTH WITH WATER.
    DRINK PLENTY OF WATER. SEEK MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>392F,>200C
Lower Limits:NONFLAMMABLE
Upper Limits:NONFLAMMABLE
Extinguishing Media:WATERSPRAY OR FOAM OR CARBON DIOXIDE OR DRY POWDER
    OR VAPORISING LIQUID
Fire Fighting Procedures:DO NOT USE WATER JETS. IN A SERIOUS FIRE IT
    MAY BE NECESSARY TO WEAR A COMPRESSED AIR BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:AVOID PRODUCTS OF COMBUSTION WHILE
    PUTTING OUT THE FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL (SAND,
    SAWDUST, COTTON WASTE, PAPER TOWELS, ETC). REMOVE THE CONTAMINATED
    CLEANING MATERIAL TO A SAFE PLACE PENDING DISPOSAL. THE AFFECTED
    AREA SHOULD BE WASHED WITH D ETERGENT SOLUTION, PREFERABLEY HOT.
    RINSE W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS SECURELY CLOSED. STOW
    THE CONTAINERS AWAY FROM FOOD, FOOD CONTAINERS AND CLOTHING.
Other Precautions:HANDLING TECHNIQUES MUST ENSURE THAT NO UNCURED EPOXY
    MATERIAL COMES INTO CONTACT WITH EYES OR SKIN. CLEANLINESS AND
    TIDINESS IN WORKING ARE OF THE UTMOST IMPORTANCE. REMOVE AND
    ISOLATE CONTAMINATED C LOTHING; LAUNDER BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS
Ventilation:THE WORK AREA MUST BE ADEQUATELY VENTILATED. VENTILATED
    BENCH HOODS SHOULD BE PROVIDED FOR MIXING.
Protective Gloves:NITRILE, NATURAL RUBBER, POLYETHYLENE
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:OVERALLS, HEAVYDUTY APRONS, EMERGENCY
    EYEWASH/ SHOWER
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
    AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
WHENEVER THE FULLY CURED OR HARDENED MATERIAL IS TO BE MACHINED, THE
    EQUIPMENT SHOULD BE PROVIDED WITH AN EFFECTIVE LOCAL EXTRACTION
    SYSTEM. OPERATORS SHOULD WEAR EYE PROTECTION AND WHEN NECESSARY, AD
    UST MASK PROTECTING THE NOSE AND MOUTH.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:CA 1 PA
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:INSOLUBLE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AMINE-BASED HARDENERS SUPPLIED WITH KIT UNTIL READY FOR USE
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE
    UPON BURNING
Conditions to Avoid Polymerization:CONTACT WITH AMINE-BASED HARDENER
    BEFORE READY FOR USE. WHEN BLENDED PRODUCT WILL HARDEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
GRADE S-5641 MICROPOWDER IRON 7439-89-6
MAGNA-SEE TAPE DEVELOPER
MAP-9046 LITHIUM CARBONMONOFLUORIDE BATTERY 7439-93-2
616-42-2
29935-35-1
CYTHION ULV INSECTICIDE, PREMIUM GRADE MALA 121-75-5
PRESSURIZED CYLINDER 584-08-7
TRACTOR HYDRAULIC FLUID CPS226606
SAVIN 870/880/SYSTEM 800 LAND CONC. PROD # 64742-48-9
1333-86-4
SANDEL #2 7732-18-5
8051-30-7
SA 826 3242
LEAD-ACID BATTERY 7439-92-1
7440-36-0
7440-38-2
7664-93-9
7440-70-2
7440-31-5
LEAD-ACID BATTERY 7439-92-1
7440-36-0
7440-38-2
7664-93-9
7440-70-2
7440-31-5
PYROTECHNIC COMPOSITIONS; 2-9000-00/-36,-40 7778-74-7
7440-67-7
7782-42-5
PYROTECHNIC DEVICE, 2-100920, (PRESSURE CAR 7778-74-7
7440-67-7
13424-46-9
LEAD AZIDE, PART C. 13424-46-9
S72DEK CHEM BLEND DEVELOPER, PART A 123-31-9
1310-58-3
7732-18-5
XD 4229 AND ARALDITE 2002 COMPONENT A KIT
ARALDITE HARDENER HW 2934 AND ARALDITE 2002
ARALDITE HARDENER HY 956, KIT P/N TL 5493
ARALDITE LY 556 -- KIT P/N TL5493 25036-25-3
AW 106 AND ARALDITE 2001 COMPONENT A KIT P
ARALDITE HARDENER HV9530 AND ARALDITE 2001
PRESTONE ADVANCED FORMULA ANTIFREEZE/COOLAN 107-21-1
111-46-6
7732-18-5
BARE WIRE ER 80 S-D 2 7440-02-0
1333-86-4
7439-96-5
7439-98-7
7723-14-0
7440-21-3
7704-34-9
7440-50-8
1309-37-1
1012/5012/5014 DRY INK CARTRIDGE,P/N 6R275 25767-47-9
1309-38-2
9003-07-4
102561-46-6
112945-52-5
112945-86-9
LEAD-ACID CELL (ANTIMONY) 7439-92-1
7440-36-0
1309-60-0
7664-93-9
LEAD/ACID STORAGE BATTERY 7664-93-9
7439-92-1
7440-36-0
7440-38-2
LEKTRO-TECH 76-13-1
124-38-9
CHEVRON E36 RUNWAY DEICER-LIQUID 127-08-2
7732-18-5
CHEVRON E36 (TM) RUNWAY DEICER-LIQUID 127-08-2
7732-18-5
BA5800/U ETERNACELL (G6-104E FROM CROMPTON) 7446-09-5
SODIUM HYDROXIDE,PART A 1310-73-2
BORAX,PART B
MACHINE CLEANER, 088 79-01-6
107-21-1
177-21-1
91-20-3
FORM 3 ALKYD BASED PAINT 64742-88-7
OPTIC CLEANER 15 OZ 64-17-5
111-76-2
68476-85-7
NEUTRA RUST 661 111-76-2
NEUTRA RUST TL 111-76-2
VINYL ESTER PIPING COMPONENTS
SUNAPLEX 992 EP GR 57855-77-3
15337-18-5
64742-65-0
54326-11-3
15991-76-1
68049-42-3
15337-18-5
DRY-CLEAN (179545) (179546) 227 67-63-0
111-76-2
SAFETY-KLEEN GENERAL PURPOSE CLEANER 666 6834-92-0
497-19-8
7601-54-9
8002-09-3
518-47-8
SIKAFLEX 1A ALUMINUM GRAY, 431 1317-65-3
1305-78-8
13463-67-7
1330-20-7
GRADE 801-LD 63231-67-4
12736-96-8
1332-58-7
14808-60-7
KRYLON SPRAY PRIMER 1367 67-64-1
74-98-6
78-83-1
108-88-3
8032-32-4
INDUSTRIAL WASH PRIMER COMP A, G316-200A 13530-65-9
63148-65-2
67-63-0
71-36-3
7664-38-2
INDUSTRIAL WASH PRIMER COMP B, G316-200B 7664-38-2
7732-18-5
67-63-0
SUPREME ONE COAT ACRYLIC HOUSE PAINT, 10-34 7732-18-5
107-21-1
SUPREME ONE COAT ACRYLIC HOUSE PAINT, 10-33 7732-18-5
107-21-1
URETHANE ALKYD ENAMEL SEMI GLOSS, 13-1 WHIT 64475-85-0
URETHANE ALKYD ENAMEL SEMI GLOSS, 13-36 CLE 64475-85-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com