MSDS NAME:4056 PROTHANE PRIMER COMPONENT A
NIIN:00N026394
Kit Part:Y
MSDS Number: BMCXH
=== Responsible Party ===
Company:PRO-LINE PAINT CO
Address:2646 MAIN ST
City:SAN DIEGO
State:CA
ZIP:92113-3697
Country:US
Info Phone Num:619-231-2313;619-232-8968
Emergency Phone Num:619-728-3192;619-274-8357
Preparer's Name:E. SOETERIK
CAGE:9D157
=== Contractor Identification ===
Company:PRO-LINE PAINT CO
Address:2646 MAIN STREET
Box:City:SAN DIEGO
State:CA
ZIP:92113-3697
Country:US
Phone:619-231-2313; 619-232-8968
CAGE:9D157
============= Composition/Information on Ingredients =============
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NAUSEA, DIZZINESS, HEADACHE &
CONVULSIONS. CHRONIC: PERSONS WITH ASTHMATIC-TYPE CONDITIONS,
CHRONIC BRONCHITIS, OTHER RESPIRATORY DISEASES, OR RECURRENT SKIN
DISEASE SHOULD BE EXCLUDED FROM WORK ING WITH PROD. INHAL OF HIGER
CONC MAY CAUSE HDCH, NAUS, VOMIT & COMA. INHAL OF VERY HIGH CONC
MAY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CAUSE UNCON/DEATH. EYES/SKIN:BURNING
SENSATION FROM VAPOR OR LIQUID. DERMATITIS. ABSORBED THRU
SKIN:DEFATTING OF SKIN CAN LEAD TO MORE SERIOUS SKIN INFECTIONS.
INGEST:TOXIC IF SWALLOWED. CAN CAUSE BURNING SENSATION, VOMITING,
DIARRHEA, DROWSINESS.
Medical Cond Aggravated by Exposure:ASTHMA AND SKIN ALLERGIES.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH IMMED W/FRESH H*2O BY AN EYE WASH APPARATUS/BY HAND
FOR @ LST 15 MIN. SEEK MED ATTN. SKIN:WASH IMMED W/H*2O. THEN
WASH/W SOAP & H*2O, RINSE IMMED. SEEK MED ATTN. INHAL:MOVE TO FRESH
AIR; ART F RESP IF NECESSARY. SEEK MED ATTN. INGEST:SEEK MED ATTN.
RECOMMENDATIONS TO PHYS: IN ACUTE CASES SEEK MED ATTN IMMED. FOR
WORKERS WHO MAY BE EXPOS REGULARLY, PROVIDE DETAILED PERIODIC
EXAMINATIONS.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:23.0F,-5.0C
Lower Limits:1.1%
Upper Limits:7.5%
Extinguishing Media:WATER SPRAY, FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
BLANKET FLAME W/1 OF ABOVE. VAP OF COMBUST MAY BE IRRITATING TO
RESP TRACT. MAY CAUSE BRTHG DFCLT. (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS, AND
OPEN FLAMES.
Spill Release Procedures:REMOVE ALL TYPES OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENT. PROTECT CLEAN-UP PERSON WITH NIOSH/MSHA APPROVED
8540 3M CORP RESPIRATOR AND GOGGLES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:PROTECT AGAINST PHYS DAMAGE TO CONTR &
SPILLAGE. STORE IN COOL WELL VENTILATED AREA WITH SPRINKLER SYSTEM.
KEEP AWAY FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions:REPORTS HAVE SHOWN THAT ASSOC RPTD & PRLNG
OCCUPATIONAL OVEREXP TO SOLVENTS CAN CAUSE PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIB CONC & INHALING
CONTENTS MAY BE HARMFUL OR FA TAL. USE ONLY WITH ADEQUATE
VENTILATION.
Respiratory Protection:NIOSH/MSHA APPRVD DUST/MIS RESP (HIGH EFFICIENCY
CARTRIDGES ADVISED), IF SPRAY/SAND. USE NIOSH/MSHA APPRVD ORG VAP
CARTRIDGE RESP IF TLV FOR SOLV COMPONENTS MAY EXCEEDED E.G. 8540 3M
RESP. WHEN USING IN CONFINED AREA, USE NIOSH/ (SUPP DATA)
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROT CLTHG & CHANGE CONTAMD CLTHG IMMED.
PROVIDE EMER SHOWERS & EYEWASH @ STATIONARY PAINT APPLICATION
FACILITIES.
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING PROC
BEFORE THEY WORK WITH PROD. ODOR IS NOT AN ADEQ WARNING OF
INTOXICATION.
Supplemental Safety and Health
FIRE FIGHT PROC:PVNT HUMAN EXPOS TO FIRE/SMOKE/FUMES/ETC. RESP PROT:
MSHA APPROVED AIR-FED HOOD.
HCC:F3
Boiling Pt:B.P. Text:165F, 74C
Vapor Pres:46@20C
Vapor Density:4.5
Spec Gravity:1.45
Evaporation Rate & Reference:0.42(BUTYL ACETATE=1)
Solubility in Water:PARTIAL
Appearance and Odor:VISCOUS LIQUID WITH AROMATIC HYDROCARBON ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPORS TO ACCUMULATE.
Hazardous Decomposition Products:FLAMM FUMES MAY ACCUMULATE IN CONFINED
AREA & SPARK/OPEN FLAMES MAY IGNITE. MAY LIBERATE CO*2, CO, NO*X.
Conditions to Avoid Polymerization:EXTREME HEAT.
Waste Disposal Methods:USE METAL CONTAINER MARKED "DO NOT REUSE". PUT
MATERIAL IN CONTAINER. USE VERMICULITE OR OTHER INERT ABSORBENT.
KEEP AWAY FROM SEWER. DISPOSE OF ALL WASTES IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.