===================== Product Identification =====================
MSDS NAME:AMEROX OXYGEN, 505018/721010
NIIN:00N026259
MSDS Number: BMCWD
=== Responsible Party ===
Company:DREW CHEMICAL CORP
Address:ONE DREW PLAZA
City:BOONTON
State:NJ
ZIP:07005
Country:US
Info Phone Num:201-263-7600
Emergency Phone Num:606-324-1133
CAGE:52454
=== Contractor Identification ===
Company:DREW CHEMICAL CORP,DIV OF ASHLAND CHEMICAL CO
Address:ONE DREW CHEMICAL PLAZA
Box:City:BOONTON
State:NJ
ZIP:07005
Country:US
Phone:606-324-1133
CAGE:52454
============= Composition/Information on Ingredients =============
Name:ING 15: EXPECIALLY CLOTHING, AS IT INCREASES LIKELIHOOD OF
AN ENGULFING FIRE. NOTE: REVERSE FLOW INTO CYLINDER (ING 17)
RTECS #:9999999ZZ
Name:ING 16: MAY CAUSE RUPTURE. USE CHECK VALVE/OTHER PROTECTIVE
APPARATUS IN ANY LINE/PIPING FROM CYLINDER TO PVNT (ING 18)
RTECS #:9999999ZZ
Name:ING 17: REVERSE FLOW. MIX: WHEN 2/MORE GASES/LIQ GASES ARE
MIX, HAZ PROPS MAY COMBINE TO CREATE ADDITIONAL (ING 19)
RTECS #:9999999ZZ
Name:ING 18: UNEXPECTED HAZS. OBTAIN & EVAL SAFETY INFO FOR EACH
COMPONENT BEFORE PRDCE MIX. CONSULT AN IH/OTHER (ING 20)
RTECS #:9999999ZZ
Name:ING 19: TRAINED PERS WHEN YOU MAKE SAFETY EVAL OF END PROD.
GASES & LIQS HAVE PROPS THAT CAN CAUSE SEROUS INJURY(ING 21)
RTECS #:9999999ZZ
Name:ING 20: OR DEATH. BE SURE TO READ & UNDERSTAND ALL LABELS &
OTHER INSTRUCTIONS SUPPLIED W/ALL OF THE CNTNRS OF PROD.
RTECS #:9999999ZZ
Name:OXYGEN
CAS:7782-44-7
RTECS #:RS2060000
Fraction by Wt: 100%
Name:SUPP DATA: EXPLOSION HAZARDS.
RTECS #:9999999ZZ
Name:FIRST AID PROC: CHLOROQUINE. INCREASES SUSCEPTIBILITY TO
TOX FOR O*2 AT HIGH CONCS/PRESS. ANIMAL STUDIES ALSO(SUPP DATA)
RTECS #:9999999ZZ
Name:ING 3: INDICATE THAT VITAMIN E DEFICIENCY MAY INCREASE
SUSCEPTIBILITY TO O*2 TOX. AIRWAY OBSTRUCTION DURING (ING 5)
RTECS #:9999999ZZ
Name:ING 4: HIGH O*2 TENSION MAY CAUSE ALVEOLAR COLLAPSE
FOLLOWING ABSORP OF O*2. SIMILIARLY, OCCLUSION OF EUSTACHIAN(ING 6)
RTECS #:9999999ZZ
Name:ING 5: TUBES MAY CAUSE RETRACTION OF EARDRUM & OBSTRUCTION
OF PARANASAL SINUSES MAY PRDCE "VACUUM TYPE" HDCH. (ING 7)
RTECS #:9999999ZZ
Name:ING 6: NEWBORN PREMATURE INFANTS EXPOS TO HIGH O*2 CONCS
MAY SUFFER DELAYED RETINAL DMG WHICH CAN PROGRESS TO (ING 8)
RTECS #:9999999ZZ
Name:ING 7: RETINAL DETACHMENT & BLINDNESS (RETROLENTAL
FIBROPLASIA). RETINAL DMG CAN ALSO OCCUR IN ADULTS EXPOS TO (ING 9)
RTECS #:9999999ZZ
Name:ING 8: 100% O*2 UNDER >ATMOSPHERIC PRESS, PARTICULARLY IN
INDIVIDUALS WHOSE RETINAL CIRCULATION HAS BEEN (ING 10)
RTECS #:9999999ZZ
Name:ING 9: PREVIOUSLY COMPROMISED. ALL INDIVIDUALS EXPOSED FOR
LONG PERIODS TO O*2 AT HIGH PRESS & ALL WHO EXHIBIT (ING 11)
RTECS #:9999999ZZ
Name:ING 10: OVERT O*2 TOXICITY SHOULD HAVE OPHTHALMOLOGIC
EXAMINATIONS.
RTECS #:9999999ZZ
Name:HNDLG/STOR: CYLINDERS UNLESS SPECIFICALLY DESIGNED FOR SUCH
USE. USE ONLY W/EQUIP CONDITIONED FOR O*2 SERVICE. (ING 13)
RTECS #:9999999ZZ
Name:ING 12:USE PIPING & EQUIP ADEQ DESIGNED TO W/STAND PRESS TO
BE ENCOUNTERED. PROTECT CNTNR AGAINST PHYSICAL DMG. (ING 14)
RTECS #:9999999ZZ
Name:ING 13: ISOLATE FROM COMBUST GAS INSTALLATIONS & COMBUST
MATLS BY ADEQ DISTANCE/BY GAS-TIGHT, FIRE RESISTIVE (ING 15)
RTECS #:9999999ZZ
Name:ING 14: BARRIERS. PROTECT AGAINST OVER-HEATING. NEVER USE
AN O*2 JET FOR CLEANING PURPOSES OF ANY SORT, (ING 16)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: BRTHG 80%/MORE O*2 AT
ATMOS PRESS FOR >FEW HOURS MAY CAUSE NASAL STUFFINESS, COUGH, SORE
THROAT, CHEST PAIN & BRTHG DFCLTY. BRTHG O*2 AT HIGHER PRESS
INCREASES LIKELIHOOD OF ADVERSE EFTS W/IN A SHORTER TIME PERIOD.
BRTHG PUREO*2 UNDER PRESS MAY CAUSE LUNG DMG & ALSO CNS EFTS RSLTG
IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: DIZZ, POOR COOR, TINGLING SENSATION,
VISUAL & HEARING DISTURBS, MUSCULAR TWITCHING, UNCON & CONVULSIONS.
BRTHG O*2 UNDER PRESS MAY CAUSE PROLONGATION OF ADAPTATION TO
DARKNESS & REDUCED PERI PHERAL VISION. CHRONIC: NO EVIDENCE OF
ADVERSE EFFECTS FROM AVAILABLE INFORMATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGEST: PROD IS A GAS AT NORMAL TEMP & PRESS. SKIN: NO EMERG
CARE ANTICIPATED. INHAL: REMOVE TO FRESH AIR. GIVE ARTF RESP IF NOT
BRTHG, KEEP VICTIM WARM & AT REST. CALL MD. EYES: NO EMERG CARE
ANTICIP ATED. NOTE TO MD: SUPP TREATMENT SHLD INCLUDE IMMED
SEDATION, ANTI-CONVULSIVE THERAPY IF NEEDED & REST. ANIMAL STUDIES
SUGGEST THAT ADMIN OF CERTAIN DRUGS, INCLUDING PHENOTHIAZINE DRUGS
& (ING 3)
===================== Fire Fighting Measures =====================
Extinguishing Media:VIGOROUSLY ACCELERATES COMBUST. USE MEDIA APPROP
FOR SURROUNDING FIRE. WATER(I.E.,SAFETY SHOWER) IS PREF FOR CLTHG
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
EVAC ALL PERS FROM DANGER AREA. IMMED COOL CNTNRS W/WATER SPRAY
FROM MAX DISTANCE UNTIL COOL.(SUPP DATA)
Unusual Fire/Explosion Hazard:OXIDIZING AGENT, VIGOROUSLY ACCELERATES
COMBUST. CONTACT W/FLAMM MATLS MAY CAUSE FIRE/EXPLO. CNTNR MAY
RUPTURE DUE TO HEAT OF FIRE. NO PART OF CNTNR(SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:SHUT OFF LEAK IF W/OUT RISK. VENT AREA OF
LEAK/MOVE LEAKING CNTNR TO WELL-VENT AREA. REMOVE ALL FLAMM MATLS
FROM VICINITY. O*2 MUST NEVER BE PERMITTED TO STRIKE AN OILY
SURFACE, GREASY CLOTHES, OR OTH ER COMBUSTIBLE MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:WARNING: HIGH PRESS GAS. VIGOROUSLY
ACCELERATES COMBUST. AVOID CONTACT W/OILS, GREASES & OTHER FLAMM
MATLS. NEVER USE MANIFOLDS FOR O*2 (ING )
Other Precautions:NEVER WORK ON PRESS SYSTEM. IF THERE IS A LEAK, CLOSE
CYLINDER VALVE, BLOW DOWN SYSTEM BY VENTING TO A SAFE PLACE, THEN
REPAIR LEAK. NEVER LUBRICATE O*2 VALVES, REGULATORS ETC., WITH ANY
COMBUSTIBLE S UBSTANCE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL) ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:METATARSAL SHOES FOR CYLINDER HANDLING.
SELECT I/A/W OSHA 20 CFR 1910.132,133.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:MOVE CNTNRS AWAY FROM FIRE AREA IF W/OUT RISK. EXPLO
HAZ: SHOULD BE SUBJECTED TO A TEMP HIGHER THAN 125F. MOST CNTNRS
ARE PROVIDED W/PRESS RELIEF DEVICE DESIGNED TO VENT CONTENTS WHEN
THEY ARE EXPOS TO ELEV TEMPS. SMOKING, FLAMES & ELECT SPARKS IN
PRESENCE OF ENRICHED O*2 ATMOS ARE POTNTL (ING 2)
================== Physical/Chemical Properties ==================
HCC:G3
Boiling Pt:B.P. Text:-297F,-183C
Melt/Freeze Pt:M.P/F.P Text:-362F,-219C
Vapor Pres:GAS @ 20C
Vapor Density:1.105@ 25C
Spec Gravity:GAS
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS ODORLESS GAS AT NORMAL TEMPERATURE AND
PRESSURE.
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
COMBUSTIBLE MATERIALS, ASPHALT, FLAMMABLE MATERIALS, ESPECIALLY OILS &
GREASES.
Stability Condition to Avoid:NONE CURRENTLY KNOWN.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
==================== Disposal Considerations ====================
Waste Disposal Methods:SLOWLY RELEASE INTO ATMOSPHERE, IN AN OPEN,
OUTDOORS AREA. REMOVE ALL FLAMMABLE MATERIALS FROM VICINITY.
DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE & LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
IOC-501A, 04861
| 13463-67-7 |
|
1707 4 N 1
| 71-55-6
111-76-2 |
|
DARATAK 51 L
| 25035-90-9
7732-18-5
107-41-5
108-05-4 |
|
ZN DUST ENA PIG F-102, HPA085
| 7440-66-6 |
|
EMERALD GREEN EPOXY RESIN INK, ER102
| 111-76-2
7440-47-3
64742-95-6
7439-92-1 |
|
EMERALD GREEN EPOXY RESIN INK, ER142
| 111-76-2
7440-47-3
64742-95-6
7439-92-1 |
|
EMERALD GREEN EPOXY RESIN INK, ER105
| 111-76-2
7440-47-3
64742-95-6
7439-92-1 |
|
POLAR PATCH - LOW TEMP PART A F-141-LT
| 100-42-5
91-66-7 |
|
POLAR PATCH - LOW TEMP PART B F-141-LT
| 10101-41-4
7631-86-9
1344-09-8
1332-58-7
1345-16-0
1317-80-2
1309-37-1
12063-19-3
1308-38-9
94-36-0 |
|
COPPER (II) CHLORIDE, 10698
| 7447-39-4 |
|
HYDROGEN CHLORIDE SOLUTION
| 7647-01-0 |
|
RFC 1085 A
| 25068-38-6 |
|
RFC 1085 B
| 68410-23-1 |
|
D-596-A FRICTION MATERIAL
| 1332-21-4 |
|
NICKEL ALLOY, 12625
| 7440-47-3
7439-89-6
7439-96-5
7439-98-7
7440-02-0
7440-03-1
15096-52-3
13463-67-7
7429-90-5
7789-75-5 |
|
BRANSON INDUSTRIAL STRENGTH CLEANER, 17383
| 111-76-2
7732-18-5
6834-92-0
9016-45-9
68439-57-6 |
|
6409L17925 LEAD FREE GLOSS WHITE, 64L17925
| 110-43-0
123-86-4
1330-20-7
108-83-8
13463-67-7
8032-32-4
64742-89-8
111-76-2
78-93-3 |
|
AMEROX OXYGEN, 505018/721010
| 7782-44-7 |
|
PETROLEUM HYDROCARBON BLEND, 2130
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5114
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5155
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5157
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5185
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5175
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5176
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5180
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 5229
| 64742-89-8 |
|
PETROLEUM HYDROCARBON BLEND, 6001
| 64742-89-8 |
|
APPLICATION SOLUTION SODIUM KNOWN ADDITION(
| 7647-14-5
7732-18-5
12125-02-9
1336-21-6 |
|
HALLMARK, 02879
| 1310-73-2 |
|
EMULSA-TECH, 01949
| 64741-41-9 |
|
RAPCO SEMI-GLOSS TINT BASE, 818
| 57-55-6
27236-65-3
108-05-4 |
|
BACTERGENT, 1410
| 11096-42-7
7664-38-2 |
|
EMULPHOR EL-719 SURFACTANT
| 61791-12-6
75-21-8 |
|
RESQUE 2 CONCENTRATE
| 67-63-0
2764-13-8 |
|
TRIMET
| 77-85-0 |
|
STRONG ARM GREASE, 2482
| |
|
REAMER DRAIN OPENER, 2296
| 7664-93-9
95-49-8 |
|
TETRAETHYLAMMONIUM CHLORIDE, T2265
| 56-34-8 |
|
4056 PROTHANE PRIMER COMPONENT A
| 1330-20-7
123-86-4
78-93-3 |
|
4056 PROTHANE PRIMER COMPONENT B
| 108-65-6
1330-20-7
628-63-7
14807-96-6
13463-67-7
557-05-6
71-55-6
123-91-1 |
|
GV 33750 BLACK EPOXY PASTE, GV 33750
| 25068-38-6
1333-86-4 |
|
DRY SILICONE SPRAY, 2616
| 74-98-6
106-97-8
71-55-6
76-13-1 |
|
ANTI-SEIZE GRAPHITE, 2946
| 74-98-6
106-97-8
75-09-2
71-55-6 |
|
C&C APPLIANCE WHITE, 302
| 1330-20-7
13463-67-7
108-88-3
67-64-1
71-55-6
74-98-6
75-28-5 |
|
CHARLESTON'S FINEST WILLIAM M BIRD (SUPP DA
| |
|
TAMOL 731 25% SOLUTION, 61588
| 50-00-0
7732-18-5 |
|
GASOILA SOFT SET
| 67-63-0
112-07-2 |
|
EPOXY NS-PART A, 06-0050
| 25068-38-6
68609-96-1 |
|
EPOXY NS - PART B, 06-0060
| 108-95-2 |
|
|