===================== Product Identification =====================
MSDS NAME:WRIGHTS STAIN CATALOGUE NUMBER O2785
NIIN:01-022-2656
MSDS Number: BMTYF
=== Responsible Party ===
Company:POLYSCIENCES INC
Address:400 VALLEY ROAD
City:WARRINGTON
State:PA
ZIP:18976
Country:US
Info Phone Num:215-343-6484
Emergency Phone Num:215-343-6484
CAGE:9C365
=== Contractor Identification ===
Company:POLYSCIENCES INC
Address:400 VALLEY RD
Box:City:WARRINGTON
State:PA
ZIP:18976
Country:US
Phone:215-343-6484
CAGE:32939
Company:POLYSCIENCES INC
Address:PAUL VALLEY INDUSTRIAL PARK
City:WARRINGTON
State:PA
ZIP:18976
Country:US
Phone:215-313-6484
CAGE:9C365
============= Composition/Information on Ingredients =============
Name:WRIGHTS STAIN
CAS:68988-92-1
Fraction by Wt: <100%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION OF SKIN,
EYES, RESPIRATORY SYSTEM AND GI TRACT. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED A A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALATION: COUGHING, WHEEZING, SHORTNESS OF
BREATH. EYES: REDNESS, TEARING, BLURRED VISION. SKIN: REDNESS,
RASH, ITCHING. INGESTION: NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH PLENTY OF
WATER FOR 15 MINUTES. SEE DOCTOR. SKIN: WASH WITH SOAP AND WATER.
INGESTION: DRINK 1-2 GLASSES OF WATER IF CONSCIOUS AND SEE DOCTOR.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR. USE WATER SPRAY TO DISPERSE VAPOR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROPER PROTECTIVE CLOTHING. ABSORB WITH
INERT MATERIAL AND PLACE IN A CONTAINER FOR LATER DISPOSAL. RINSE
AND VENTILATE SITE AFTER CLEAN-UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT ROOM TEMPERATURE (70F). KEEP
CONTAINER TIGHTLY CLOSED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR WITH ORGANIC VAPOR CARTRIDGE IF REGULATORY LIMITS
EXCEEDED.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
LAVOID CONTACT WITH SKIN AND EYES. DO NOT INHALE. MFGR STATE IN SPILL
PROCEDURES TO WEAR SELF-CONTAINED BREATHING APPARATUS; HMIS
TECHNICIAN SEES NO NEED FOR THIS UNLESS UNUSUAL CONDITIONS OR FIRE
WER E INVOLVED.
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:COMPLETE
Appearance and Odor:DARK GREENISH BLACK POWDER; SLIGHT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:HIGH TEMPERATURES
==================== Disposal Considerations ====================
Waste Disposal Methods:DIPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. MFR STATES: MIX WITH COMBUSTIBLE SOLVENT AND
INCINERATE AT LISCENSED SITE WITH AFTERBURNER AND SCRUBBER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|