===================== Product Identification =====================
MSDS NAME:PROFORCE TAR AND GREASE EMULSIFIER(TGE)
NIIN:00N000668
MSDS Number: BCFZM
=== Responsible Party ===
Company:AIRWICK, PROFESSIONAL PRODUCTS DIVISION
Address:1655 VALLEY RD
Box:941
City:WAYNE
State:NJ
ZIP:07474-0941
Country:US
CAGE:GO911
=== Contractor Identification ===
Company:AIRWICK INDUSTRIES INC
Address:1655 VALLEY RD
Box:941
City:WAYNE
State:NJ
ZIP:07474-0941
Country:US
Phone:201-633-2778
CAGE:7L847
Company:AIRWICK, PROFESSIONAL PRODUCTS DIVISION
Box:941
CAGE:GO911
============= Composition/Information on Ingredients =============
Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 3.00%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
Name:PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS:8002-05-9
RTECS #:SE7449000
Fraction by Wt: 83%.
OSHA PEL:400 PPM
ACGIH TLV:400 PPM; 8990
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE IRRITATION. MAY BE HARMFUL IF
SWALLOWED OR INHALED.
======================= First Aid Measures =======================
First Aid:INGESTION:GIVE WATER IF CONSCIOUS. DO NOT INDUCE VOMITING.
SKIN:WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER
BEFORE RE-USE. EYES:IMMEDIATELY FLUSH W/WATER AT LEAST 15 MIN.
INHALATION: REMOVE TO FRESH AIR. CALL MD.
===================== Fire Fighting Measures =====================
Flash Point:132 F TCC
Extinguishing Media:CO*2, WATER FOG, FOG
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINER. AVOID EXPOSURE TO OPEN FLAME OR HOT METAL SURFACES.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE REMOTE
FROM HEAT, SPARKS OR FLAME. CAUTION! COMBUSTIBLE. CONTAINS
PETROLEUM DISTILLATES.
Other Precautions:AVOID BREATHING VAPORS OR MISTS. AVOID CONTACT W/SKIN
OR EYES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF NEC, NIOSH/MSHA APPRVD RESP PROTECTION
Ventilation:LOCAL EXHAUST-ADEQUATE TO PREVENT EXCEEDING TLV
Protective Gloves:NITRILE/NEOPREN
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
MFR SUGGESTS TLV OF 485 MG/CUM. PRODUCT WILL DAMAGE SOME PLASTICS AND
PAINTS-TEST SURFACE IN INCONSPICUOUS AREA BEFORE GENERAL
APPLICATION.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:360 F
Vapor Pres:0.4
Vapor Density:4.5
Spec Gravity:0.852
Evaporation Rate & Reference:0.01 BUTYL ACET.
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSPARENT AMBER LIQUID WITH SOLVENT ODOR.
Percent Volatiles by Volume:86.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT OR OPEN FLAME.
Hazardous Decomposition Products:CO, CO*2
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR SUGGESTS INCINERATION IN CONFORMITY W/LOCAL,
STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|