===================== Product Identification =====================
MSDS NAME:NITROGEN
NIIN:00-656-1596
MSDS Number: BNDSX
=== Responsible Party ===
Company:UNION CARBIDE CORP., LINDE DIV.
Address:39 OLD RIDGEBURY RD
City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Info Phone Num:304-744-3487
Emergency Phone Num:304-744-3487
CAGE:36346
=== Contractor Identification ===
Company:UNION CARBIDE CORP LINDE DIV
Address:39 OLD RIDGEBURY RD
Box:City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Phone:800-822-4357; 304-744-3487
CAGE:36346
Company:UNITED STATES WELDING CORP.
Address:20700 DEARBORN STREET
Box:City:CHATSWORTH
State:CA
ZIP:91311
Country:US
Phone:818-341-2021
CAGE:3H796
============= Composition/Information on Ingredients =============
Name:NITROGEN
CAS:7727-37-9
RTECS #:QW9700000
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED
ACGIH TLV:ASPHYXIANT; 9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ASPHYXIANT. MODERATE CONCENTRATIONS
MAY CAUSE HEADACHE, DROWSINESS, DIZZINESS, EXCITATION, EXCESS
SALIVATION, VOMITING AND UNCONSCIOUSNESS. LACK OF OXYGEN CAN CAUSE
DEATH.
Effects of Overexposure:INHALATION: ASPHYXIANT. MODERATE CONCENTRATIONS
MAY CAUSE HEADACHE, DROWSINESS, DIZZINESS, EXCITATION, EXCESS
SALIVATION, VOMITING AND UNCONSCIOUSNESS. LACK OF OXYGEN CAN CAUSE
DEATH.
Medical Cond Aggravated by Exposure:THE TOXICOLOGY AND THE PHYSICAL AND
CHEMICAL PROPERTIES OF THE MATERIAL DO NOT SUGGEST THAT
OVEREXPOSURE IS LIKELY TO AGGRAVATE EXISTING MEDICAL CONDITIONS.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION
IF NOT BREATHING. GIVE OXYGEN IF BREATHING IS DIFFICULT. SEE
DOCTOR.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:EVACUATE AREA. DELUGE CYLINDER WITH WATER
SPRAY FROM MAXIMUM DISTANCE UNTIL COOL.
Unusual Fire/Explosion Hazard:CONTAINER MAY RUPTURE DUE TO HEAT OF
FIRE. KEEP TEMPERATURE BELOW 125F.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE AREA. USE SCBA. SHUT OFF LEAK IF
WITHOUT RISK. VENTILATE AREA OF LEAK OR MOVE LEAKER TO
WELL-VENTILATED AREA. TEST AREA FOR SUFFICIENT OXYGEN CONTENT PRIOR
TO PERMITTING RE-ENTRY OF PERSONNEL .
====================== Handling and Storage ======================
Handling and Storage Precautions:HIGH PRESSURE GAS. USE PIPING/EQUIP
DESIGNED TO WITHSTAND PRESSURE. CAN CAUSE RAPID SUFFOCATION DUE TO
OXYGEN DEFICIENCY. STORE W/ADEQUATE VENTILATION
Other Precautions:CLOSE VALVE WHEN NOT IN USE & WHEN EMPTY. NEVER WORK
ON A PRESSURIZED SYSTEM. IF LEAKING, CLOSE CYLINDER VALVE,BLOW DOWN
SYSTEM BY VENTING TO SAFE PLACE, THEN REPAIR THE LEAK.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH,MSHA APPROVED AIR SUPPLIED RESPIRATOR.
Ventilation:MECHANICAL ACCEPTABLE, LOCAL EXHAUST PREFERRED.
Protective Gloves:LEATHER WORK GLOVES.
Eye Protection:GOGGLES
Other Protective Equipment:METATARSAL SHOES FOR CYLINDER HANDLING
Work Hygienic Practices:STANDARD PRACTICES AND PROCEDURES.
Supplemental Safety and Health
NONE
================== Physical/Chemical Properties ==================
HCC:G3
Boiling Pt:B.P. Text:-320F,-196C
Vapor Pres:,GAS
Vapor Density:0.97
Spec Gravity:N/R, GAS
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, ODORLESS GAS AT NORMAL TEMPERATURE AND
PRESSURE.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN
Stability Condition to Avoid:HEAT, OPEN FLAMES.
Hazardous Decomposition Products:NONE
==================== Disposal Considerations ====================
Waste Disposal Methods:SLOWLY RELEASE INTO ATMOSPHERE. DISCARD ANY
RESIDUE,PRODUCT,DISPOSABLE CONTAINER IN FULL COMPLIANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
8300802, CAL-TINT II 830-0802 BULLETIN RED
| 107-21-1
111-46-6
14807-96-6 |
|
33 SPRAY WAX
| 67-63-0 |
|
TITESEAL FLOOR SEALER
| 107-21-1 |
|
1016116,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| |
|
1016186,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| 6358-30-1 |
|
1016316,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| 3468-11-9 |
|
1016317,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| 1328-53-6 |
|
1016380,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| |
|
1008116,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| |
|
1008186,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 6358-30-1 |
|
1008316,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 3468-11-9 |
|
1008317,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1328-53-6 |
|
1008380,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| |
|
1008411,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| |
|
1008416,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1309-37-1 |
|
1008151,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 85-83-6 |
|
1008127,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1309-37-1 |
|
1008330,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1309-37-1 |
|
TITANIUM TRITIDE
| 7440-32-6 |
|
MULTI-PURPOSE GEAR LUBRICANT NO.140
| 64742-54-7
64742-01-4 |
|
MULTI-PURPOSE GEAR LUBRICANT NO.140
| 64742-54-7
64742-01-4 |
|
UNIVOLT N 61
| 64742-53-6 |
|
RESIN BONDED ALUMINUM OXIDE ABRASIVES; "A"
| 1344-28-1
78-79-5
1314-23-4
8001-58-9
7782-42-5
7704-34-9
9010-76-8
7429-90-5
7440-50-8
7727-43-7
15096-52-3
1309-36-0
1305-78-8
1344-95-2 |
|
ANTIFREEZE, ARTIC TYPE
| 107-21-1
111-46-6 |
|
SODIUM NITRATE
| 7631-99-4 |
|
BRAYCO 300
| 64742-46-7
64742-53-6
61789-86-4
25322-69-4
61788-89-4 |
|
LUBRICATING OIL,ENGINE,MIL-L-2104,10W GRADE
| |
|
MIL-L-2104F, OE-10 QUAL.# MC-3723
| 64741-88-4 |
|
MULTI-PURPOSE GEAR LUBRICANT NO.90
| 64741-88-4
64742-01-4 |
|
MERCURIC NITRATE,MONOHYDRATE
| 7783-34-8 |
|
CALCIUM SULFATE, ANHYDROUS
| 7778-18-9 |
|
KEROSENE
| 8008-20-6 |
|
KEROSENE
| 8008-20-6 |
|
KEROSENE
| 8008-20-6 |
|
VV-C-850A TYPE II; CUTTING FLUID
| |
|
SODIUM CARBONATE ANHYDROUS
| 497-19-8 |
|
KEROSENE
| 8008-20-6 |
|
ORTHODICHLOROBENZENE 600#
| 95-50-1
106-46-7
541-73-1 |
|
SODIUM SULFITE ANHYDROUS, 3922
| 7757-83-7 |
|
CYCLOHEXYLAMINE
| 108-91-8 |
|
ITEK PREMIUM PLATE TONER, 38414
| 64742-48-9 |
|
1010, AURA
| 11084-85-8
7722-88-5 |
|
NO DRIP PLASTIC COATING
| 8052-42-4
14808-60-7 |
|
NO. "7" COOLING SYSTEM CLEANSER 2131N
| 497-19-8
144-62-7
9008-63-3 |
|
CALCIUM HYDROXIDE
| 1305-62-0 |
|
NITROGEN
| 7727-37-9 |
|
JET A-1
| 8008-20-6
91-20-3 |
|
BATTERY, STORAGE
| 7440-43-9
21041-95-2
7440-02-0
12054-48-7
1310-58-3 |
|
6024 (SEE SUPPLEMENTAL)
| |
|
MULTI-PURPOSE GEAR LUBRICANT NO. 140
| 64742-54-7
64742-01-4 |
|
|