===================== Product Identification =====================
MSDS NAME:KEROSENE
NIIN:00-242-6749
MSDS Number: BNDSH
=== Responsible Party ===
Company:NEWFOUNDLAND DOCKYAARD CORP
Address:JOBS BRIDGE CROSSING
Box:97
City:ST JOHNS NEW FOUNDLAND CANADA
Country:CA
Info Phone Num:709-463-8811
Emergency Phone Num:709-463-8811
CAGE:0M8E5
=== Contractor Identification ===
Company:NEWFOUNDLAND DOCKYAARD CORP
Address:JOBS BRIDGE CROSSING
Box:97
City:ST JOHNS NEW FOUNDLAND CANADA
Country:CA
Phone:709-463-8811
CAGE:0M8E5
============= Composition/Information on Ingredients =============
Name:KEROSENE
CAS:8008-20-6
RTECS #:OA5500000
Fraction by Wt: 100% %
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM 9091
===================== Hazards Identification =====================
LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE IRRITATION, RESPIRATORY TRACT
IRRITATION, CENTRAL NERVOUS SYSTEM EFFECTS,SKIN IRRITATION/RASH,
GASTROINTESTINAL DISTURBANCES, ASPIRATION HAZARD
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA PER
MANUFACTURER.
Effects of Overexposure:EYES/NOSE/THROAT IRRITATION, HEADACHES,
DIZZINESS, SKIN RASH, NAUSEA, VOMITING, DIARRHEA, RESTLESSNESS,
CHEMICAL PNEUMONIA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND/OR REPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. ADMINISTER ARTIFICIAL
RESPIRATION OR CPR. GET MEDICAL ATTENTION. EYES: FLUSH CONTINUOUSLY
WITH WATER FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL
ATTENTION. SKIN: FLUSH WITH LARGE AMOUNTS OF WATER. USE SOAP IF
AVAILABLE. REMOVE CONTAMINATED CLOTHING. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:100F,38C
Lower Limits:0.7 %
Upper Limits:5 %
Extinguishing Media:FOAM, DRY CHEMICAL OR WATER SPRAY. AVOID SPRAYING
DIRECTLY INTO FIRE.
Fire Fighting Procedures:USE WATER SPRAY TO COOL FIRE EXPOSED SURFACES
AND TO PROTECT PERSONNEL. SHUT OFF FUEL TO FIRE IF POSSIBLE. WEAR
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL TO REMOTE IGNITION
SOURCES AND IGNITE.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. KEEP PUBLIC
AWAY. PREVENT ACCIDENTAL DISCAHRGE INTO SEWERS, WATERCOURSES OR LOW
AREAS. CONTAIN SOILED LIQUID WITH EARTH OR SAND. RECOVER BY PUMPING
OR USE ON NONCOMBUSTI BLE ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS CLOSED AND AWAY FROM
IGNITION SOURCES AND HEAT. HANDLE AND OPEN CONTAINERS WITH CARE.
STORE IN A COOL, WELL-VENTILATED AREA.
Other Precautions:MATERIAAL WILL ACCUMULATE STATIC CHARGES WHICH MYA
BECOME A SOURCE OF IGNITION. USE PROPER GROUNDING PROCEDURES.
FOLLOW PROPER SWITCH LOADING PROCEDURES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHEN CONCENTRATIONS MAY EXCEED THE PEL/TLV'S AND
WHERE ENGINEERING WORK PRATICES OR OTHER MEANS OF EXPOSURE
REDUCTION ARE NOT ADEQUATE, APPROVED RESPIRATORS MAY BE NECESSARY
TO PREVENT OVEREXPOSURE BY INHALATION.
Ventilation:LOCAL EXHAUST VENTILATION IS RECOMMENDED. LAB SAMPLES
SHOULD BE HANDLED IN A FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS
Other Protective Equipment:LONG SLEEVED SHIRTS, EMERGENCY EYEWASH
STATION AND SHOWER.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
MAY FORM COMBUSTIBLE MIXTURES AT OR ABOVE THE FLASHPOINT. FLAMMABLE
GASES WILL FORM AT ELEVATED TEMPERATURES. TOXIC GASES WILL FORM
UPON COMBUSTION. MATERIAL MAY ACCUMULATE STATIC CHARGES WHICH MAY
DI SCHARGE AND CAUSE IGNITION. EMPTY PRODUCT CONTAINERS MAY CONTAIN
PRODUCT RESIDUE. DO NOT PRESSURIZE, CUT, HEAT OR WELD.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:130F - 300C
Melt/Freeze Pt:M.P/F.P Text:-40F,-40C
Vapor Pres:5 KPA @38C
Vapor Density:4.5
Spec Gravity:0.80-0.85@15C
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS OR PALE YELLOW LIQUID PETROLEUM
ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS OXYGEN, CHLORINE, BROMINE
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, HOT SURFACES
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, CARBON
DIOXIDE, SULPHUR OXIDES
==================== Disposal Considerations ====================
Waste Disposal Methods:ENSURE DISPOSAL IN COMPLIANCE WITH GOVERNMENT
REGULATIONS AND LOCAL DISPOSAL REGULATIONS. NOTIFY AUTHORITIES
IMMEDIATELY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
8300802, CAL-TINT II 830-0802 BULLETIN RED
| 107-21-1
111-46-6
14807-96-6 |
|
33 SPRAY WAX
| 67-63-0 |
|
TITESEAL FLOOR SEALER
| 107-21-1 |
|
1016116,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| |
|
1016186,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| 6358-30-1 |
|
1016316,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| 3468-11-9 |
|
1016317,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| 1328-53-6 |
|
1016380,LIQUITEX ACRYLIC ARTIST COLOR 16OZ(
| |
|
1008116,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| |
|
1008186,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 6358-30-1 |
|
1008316,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 3468-11-9 |
|
1008317,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1328-53-6 |
|
1008380,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| |
|
1008411,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| |
|
1008416,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1309-37-1 |
|
1008151,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 85-83-6 |
|
1008127,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1309-37-1 |
|
1008330,LIQUITEX ACRYLIC ARTIST COLOR 8 OZ(
| 1309-37-1 |
|
TITANIUM TRITIDE
| 7440-32-6 |
|
MULTI-PURPOSE GEAR LUBRICANT NO.140
| 64742-54-7
64742-01-4 |
|
MULTI-PURPOSE GEAR LUBRICANT NO.140
| 64742-54-7
64742-01-4 |
|
UNIVOLT N 61
| 64742-53-6 |
|
RESIN BONDED ALUMINUM OXIDE ABRASIVES; "A"
| 1344-28-1
78-79-5
1314-23-4
8001-58-9
7782-42-5
7704-34-9
9010-76-8
7429-90-5
7440-50-8
7727-43-7
15096-52-3
1309-36-0
1305-78-8
1344-95-2 |
|
ANTIFREEZE, ARTIC TYPE
| 107-21-1
111-46-6 |
|
SODIUM NITRATE
| 7631-99-4 |
|
BRAYCO 300
| 64742-46-7
64742-53-6
61789-86-4
25322-69-4
61788-89-4 |
|
LUBRICATING OIL,ENGINE,MIL-L-2104,10W GRADE
| |
|
MIL-L-2104F, OE-10 QUAL.# MC-3723
| 64741-88-4 |
|
MULTI-PURPOSE GEAR LUBRICANT NO.90
| 64741-88-4
64742-01-4 |
|
MERCURIC NITRATE,MONOHYDRATE
| 7783-34-8 |
|
CALCIUM SULFATE, ANHYDROUS
| 7778-18-9 |
|
KEROSENE
| 8008-20-6 |
|
KEROSENE
| 8008-20-6 |
|
KEROSENE
| 8008-20-6 |
|
VV-C-850A TYPE II; CUTTING FLUID
| |
|
SODIUM CARBONATE ANHYDROUS
| 497-19-8 |
|
KEROSENE
| 8008-20-6 |
|
ORTHODICHLOROBENZENE 600#
| 95-50-1
106-46-7
541-73-1 |
|
SODIUM SULFITE ANHYDROUS, 3922
| 7757-83-7 |
|
CYCLOHEXYLAMINE
| 108-91-8 |
|
ITEK PREMIUM PLATE TONER, 38414
| 64742-48-9 |
|
1010, AURA
| 11084-85-8
7722-88-5 |
|
NO DRIP PLASTIC COATING
| 8052-42-4
14808-60-7 |
|
NO. "7" COOLING SYSTEM CLEANSER 2131N
| 497-19-8
144-62-7
9008-63-3 |
|
CALCIUM HYDROXIDE
| 1305-62-0 |
|
NITROGEN
| 7727-37-9 |
|
JET A-1
| 8008-20-6
91-20-3 |
|
BATTERY, STORAGE
| 7440-43-9
21041-95-2
7440-02-0
12054-48-7
1310-58-3 |
|
6024 (SEE SUPPLEMENTAL)
| |
|
MULTI-PURPOSE GEAR LUBRICANT NO. 140
| 64742-54-7
64742-01-4 |
|
|