===================== Product Identification =====================
MSDS NAME:1922 A CONCISE ENAMEL BOND SYSTEM RESIN A
NIIN:01-153-6167
Kit Part:Y
MSDS Number: BNMST
=== Responsible Party ===
Company:MINNESOTA MINING & MFG CO HEALTH CARE PRODUCTS DIV
Address:3M CTR BLDG 225-5S-01
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-0131/612-733-1110
Emergency Phone Num:612-733-0131/612-733-1110
CAGE:28156
=== Contractor Identification ===
Company:MINNESOTA MINING AND MFG CO HEALTH CARE SERVICES DIV
Address:3M CTR BLDG 275-4E-01
Box:City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-854-0631
CAGE:28156
============= Composition/Information on Ingredients =============
Name:METHACRYLIC ACID,DIESTER WITH TRIETHYLENE GLYCOL
CAS:109-16-0
RTECS #:OZ4100000
Fraction by Wt: 40 - 50%
Other REC Limits:NONE SPECIFIED
OSHA PEL:NOT ESTABLISHED.
ACGIH TLV:NOT ESTABLISHED.
Name:2-PROPENIC
ACID,2-METHYL-,(1-METHYLETHYLDIENE)BIS(4,1-PHENYLENEOXY,2-HYDROXY-3
.1-PROPANEDIYL) ESTER/BISPHENOL
CAS:1565-94-2
RTECS #:UD3438000
Fraction by Wt: 40 - 50%
Other REC Limits:NONE SPECIFIED
OSHA PEL:NOT ESTABLISHED.
ACGIH TLV:NOT ESTABLISHED.
Name:N,N-DI-(2-HYDROXYETHYL)-P-TOLUIDINE
CAS:3077-12-1
Fraction by Wt: <4%
Other REC Limits:NONE SPECIFIED
OSHA PEL:NOT ESTABLISHED.
ACGIH TLV:NOT ESTABLISHED.
Name:2-BENZOTRIAZOL-4-METHYLPHENOL
CAS:2440-22-4
RTECS #:GO6860000
Fraction by Wt: <3%
Other REC Limits:NONE SPECIFIED
OSHA PEL:NOT ESTABLISHED.
ACGIH TLV:NOT ESTABLISHED.
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- EYE: MILD IRRITATION. CAN CAUSE
REDNESS, SWELLING, PAIN & TEARING. SKIN:PROLONGED/REPEATED CONTACT
CAN CAUSE MODERATE IRRITATION, REDNESS, SWELLING, ITCHING,
BLISTERING, DRYNESS & ALLERGIC REAC TION. INHALATION/INGESTION:NO
ADVERSE HEALTH EFFECTS EXPECTED. CHRONIC- ALLERGIC SKIN REACTION.
Effects of Overexposure:MILD EYE IRRITATION. CAN CAUSE REDNESS,
SWELLING, PAIN & TEARING. PROLONGED/REPEATED SKIN CONTACT CAN CAUSE
MODERATE IRRITATION, REDNESS, SWELLING, ITCHING, BLISTERING,
DRYNESS & ALLERGIC REACTION. NO ADVERSE HEALTH EFFECTS EXPECTED
FROM INHALATION OR INGESTION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS MAY BE
MORE SUSCEPTIBLE TO THIS MATERIAL.
======================= First Aid Measures =======================
First Aid:GET MEDICAL ATTENTION IF NEEDED. EYE/SKIN: FLUSH WITH WATER
FOR MINUTES. HOLD EYELIDS OPEN. INHALED/INGESTED:NOT RELEVANT.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP SPILL.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORAGE- STORE AT ROOM TEMPERATURE, IN
CLOSED CONTAINERS.
Other Precautions:WASH THOROUGHLY AFTER HANDLING. AVOID CONTACT WITH
EYES, SKIN AND CLOTHING. KEEP OUT OF REACH OF CHILDREN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT RELEVANT
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:PRACTICE GOOD HYGIENIC PROCEDURE. WASH
THOROUGHLY BEFORE EATING OR DRINKING.
Supplemental Safety and Health
THE KIT CONSISTS OF 3 PARTS UNDER THE SAME NSN. FOR OTHER PARTS SEE PIN
B AND C.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, SLIGHT YELLOW, SLIGHT ACRYLIC ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:HIGH HEAT, FIRE
Hazardous Decomposition Products:NONE KNOWN.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE PRODUCT IN A SANITARY LANDFILL.
OBSERVE LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|