===================== Product Identification =====================
MSDS NAME:MOLDE RELEASE 225 AEROSOL
NIIN:00-237-3457
MSDS Number: BNRNL
=== Responsible Party ===
Company:RAM CHEMICALS, WHITTAKER DIV/LILLY INDUSTRIES INC
Address:210 E ALONDRA BLVD
City:GARDENA
State:CA
ZIP:90248-2808
Country:US
Info Phone Num:310-352-3087/213-321-0710
Emergency Phone Num:310-352-3087/800-424-9300(CHEMTREC)
Preparer's Name:LEN PULLMAN
CAGE:22401
=== Contractor Identification ===
Company:HOOSIER INDUSTRIAL SUPPLY
Address:1223 CHICAGO AVE
Box:City:GOSHEN
State:IN
ZIP:46527-0929
Country:US
Phone:219-533-8565
CAGE:0RCD8
Company:LILLY IND INC
Address:210 E ALONDRA BLVD
Box:City:GARDENA
State:CA
ZIP:90248
Country:US
Phone:310-352-3087
CAGE:0MTA9
Company:RAM CHEMICALS, WHITTAKER DIV/LILLY INDUSTRIES INC
Address:210 E ALONDRA BLVD
Box:City:GARDENA
State:CA
ZIP:90248-2808
Country:US
Phone:310-352-3087/800-424-9300(CHEMTREC)
CAGE:22401
============= Composition/Information on Ingredients =============
Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 10%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9596
Name:METHYLENE CHLORIDE (SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 77.28%
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 10%
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
LD50 LC50 Mixture:TLV FOR METHYLENE CHLORIDE IS 50 PPM.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYE:MAY CAUSE SEVERE IRRITATION
& BURN.SKIN:MAY CAUSE IRRITATION.INHALE:MAY CAUSE RESPIRATORY
IRRITATION. REPEATED & EXCESSIVE EXPOSURE TO VAPORS MAY CAUSE
KIDNEY,LIVER/LUNG DAMAGE. IN POORLY VE NTILATED AREAS,HIGH
CONCENTRATIONS MAY CAUSE NARCOSIS/EVEN
UNCONSCIOUSNESS/DEATH.ORAL:UNLIKELY.CHRONIC-KIDNEY,LIVER DAMA
Explanation of Carcinogenicity:CONTAINS METHYLENE CHLORIDE KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE CANCER.
Effects of Overexposure:MAY CAUSE SEVERE EYE IRRITATION & BURN. MAY
CAUSE SKIN IRRITATION. INHALATION MAY CAUSE RESPIRATORY IRRITATION.
REPEATED & EXCESSIVE EXPOSURE TO VAPORS MAY CAUSE KIDNEY,
LIVER/LUNG DAMAGE. IN POORLY V ENTILATED AREAS, HIGH CONCENTRATIONS
MAYCAUSE NARCOSIS/ EVEN UNCONSCIOUSNESS/DEATH.
Medical Cond Aggravated by Exposure:CARDIOVASCULAR DISEASE
======================= First Aid Measures =======================
First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. SKIN:WASH WITH
SOAP & WATER. EYE:FLUSH WITH WATER FOR 15 MINUTES, HOLDING EYELIDS
OPEN. INHALED:REMOVE TO FRESH AIR & PROVIDE OXYGEN/CPR IF NEEDED.
ORAL:DO N OT INDUCE VOMITING. GET IMMEDIATE MEDICAL ATTENTION.
VOMITING MAY LEAD TO CHEMICAL PNEUMONITIS, WHICH CAN BE FATAL.
===================== Fire Fighting Measures =====================
Flash Point:AEROSOL,NON-FLAM
Extinguishing Media:WATER SPRAY, CO2, FOAM/DRY CHEMICAL. WATER SPRAY
MAY BE USED TO KEEP FIRE EXPOSED CONTAINERS COOL & FLUSH SPILLS
AWAY.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND NIOSH-
APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL FACEPIECE
OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:THIS PRODUCT CONTAINS EXTREMELY FLAMMABLE
SOLVENTS WHOSE VAPORS MAY FORM EXPLOSIVE MIXTURES WITH AIR.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. PREVENT FLOW INTO SEWERS AND
WATERWAYS. CLEAN UP WITH AN INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORAGE- KEEP CONTAINERS COOL, DRY AND
AWAY FROM SOURCES OF IGNITION. USE AND STORE THIS PRODUCT WITH
ADEQUATE VENTILATION.
Other Precautions:AVOID BREATHING VAPORS OR MISTS. DO NOT GET IN EYES,
ON SKIN OR ON CLOTHING. WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING OR DRINKING. REMOVE CONTAMINATED CLOTHING PROMPTLY. KEEP OUT
OF REACH OF C HILDREN. FOR INDUSTRIAL USE ONLY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NON REQUIRED UNDER NORMAL CONDITIONS. IF HIGH
VAPOR OR MIST CONCENTRATIONS EXPECTED, USE NIOSH-APPROVED
RESPIRATOR FOR ORGANIC VAPORS AND MISTS. WEAR SUPPLIED-AIR
RESPIRATOR PROTECTION IN CONFINED OR ENCLOSED SPACES, IF NEEDED.
Ventilation:NORMAL VENTILATION IS ADEQUATE.LOCAL EXHAUST SHOULD BE USED
WHEN LARGE AMOUNT IS RELEASED.USE MECHANICAL FOR LOW PLACES.
Protective Gloves:NEOPRENE OR RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/FACE SHIELD
Other Protective Equipment:EYE WASH STATION, QUICK DRENCH SHOWER AND
IMPERVIOUS CLOTHING
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
FORMULA CHANGED. FOR PREVIOUS FORMULATIONS, SEE PNI A OR B UNDER THE
SAME NSN.
================== Physical/Chemical Properties ==================
HCC:V2
Boiling Pt:=39.4C, 103.F
Vapor Pres:340 @ 68F
Vapor Density:>1
Spec Gravity:1.008
Evaporation Rate & Reference:<1 (ETHER = 1)
Appearance and Odor:LIQUID
Percent Volatiles by Volume:91
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AMINES, ALUMINUM AND MAGNESIUM
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES, SPARKS, HOT
SURFACES AND OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:MAY FORM CARBON MONOXIDE, CARBON
DIOXIDE, OXIDES OF NITROGEN AND HYDROGEN CHLORIDE
==================== Disposal Considerations ====================
Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE AEROSOL CANS.
DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
P-FQ-T203, TONER
| 1309-38-2
74-85-1 |
|
MOLYKOTE 41 GREASE
| |
|
C-7540U, DISSOLVED OXYGEN COMPARATORS
| 111-46-6
7732-18-5 |
|
ALCONOX, ANIONIC POWDERED DETERGENT
| |
|
BATTERIES,PRC1245X,PRC1240
| 7439-92-1
7664-93-9 |
|
111 COMPOUND
| |
|
4445 SAVIN 9350 DISPERSANT
| 64742-48-9 |
|
4445 SAVIN 9350 DISPERSANT
| 64742-48-9 |
|
MOLYKOTE M GEAR GUARD
| |
|
REFRIGERANT 12, FREON 12, GENETRON 12, (SUP
| 75-71-8 |
|
VARFLO & VARFIL SLEEVINGS
| 1309-64-4
58-36-6 |
|
14070-2-3, VECTRA
| 111-90-0
34590-94-8
78-51-3
7732-18-5
1314-13-2
1310-58-3
1336-21-6 |
|
4335 DEVELOPER FOR 7020S,CLASS II,AND CLASS
| 1333-86-4 |
|
AMMONIUM PERCHLORATE
| 7790-98-9 |
|
121-18 CUTTER INSECT REPELLENT STICK
| 67-63-0
134-62-3
2728-04-3
2728-05-4 |
|
PR-9021, CLASS A, POLYSULFIDE SEALANT
| 1309-60-0 |
|
PR-9021 CLASS A, PART B
| 78-93-3
9003-35-4
25068-38-6 |
|
LITHOGRAPHIC BLANKET ROLLER WASH
| 64475-85-0 |
|
PR-1435 PART A
| 13423-61-5
14307-33-6
127-19-5
68-12-2 |
|
PR-1435 PART B
| 78-93-3
9003-35-4 |
|
PRIMER ELECTROSTATIC EPOXY POLYAMIDE, ID 72
| 108-88-3
1330-20-7
100-41-4
7789-06-2
13463-67-7
14807-96-6
14808-60-7
63231-67-4
108-10-1 |
|
FREON 502 REFRIGERANT
| 76-15-3
75-45-6 |
|
EM 8116, MIL-T-6096A
| 141-78-6
123-86-4
123-42-2
78-93-3 |
|
ZINC CHROMATE, FORMULA 84D, 34128 GREEN
| 13530-65-9
14807-96-6
13463-67-7
8052-41-3
7439-92-1
1314-13-2
1314-13-2
1309-37-1 |
|
PARA-DICHLOROBENZENE
| 106-46-7 |
|
AVREX S TURBO 260
| 1330-78-5 |
|
THERMOFIT S-1009 ADHESIVE PART A
| 25068-38-6
112945-52-5
140-31-8 |
|
GLASS CLEANER, KRYSTAL KLEAR
| 67-63-0
107-98-2 |
|
XEA 9396, PART A
| |
|
23729-1
| 1310-58-3 |
|
PRECIPITATION NAPHTHA
| 110-54-3
107-83-5
109-66-0
142-82-5
78-78-4 |
|
VV-G-671 (GREASE,GRAPHITE)
| 7782-42-5
8012-95-1 |
|
TURBINE OIL SYMBOL 2190 TEP,CPS253030
| 64742-54-7 |
|
MOLDE RELEASE 225 AEROSOL
| 74-98-6
75-09-2
75-28-5 |
|
FLOWERS OF ZINC, ZINC WHITE
| 1314-13-2 |
|
PETROLATUM,TECHNICAL
| 8009-03-8 |
|
FA-1053
| 110-54-3
9003-55-8
9006-04-6 |
|
PEACOCK PREMIUM TALLOW
| 61789-97-7 |
|
A-A-105A POLISH METAL
| 8052-41-3 |
|
FA-1005
| 108-88-3
110-54-3
9006-04-6 |
|
FLOOR ABSORBENT
| 14808-60-7 |
|
TT-E-545C ALKYD PRIMER, INT, BTTE545
| 64741-41-9
14807-96-6
68855-54-9 |
|
NITROGEN, OR LIN (IN CRYOGENIC LIQUID STATE
| 7727-37-9 |
|
NITROGEN, CRYOGENIC LIQUID
| 7727-37-9 |
|
WHITE STENCIL PAINT
| 54771-72-8 |
|
DOD-P-15146B, BLACK 37038
| 64741-41-9
1333-86-4
14807-96-6
68855-54-9 |
|
DOD-P-15146B, BLACK 37038, B15146
| 64741-41-9
1333-86-4
14807-96-6
68855-54-9 |
|
CS 3100 TYPE II CLASS 2 PART A
| 108-88-3
68611-50-7 |
|
A-A-1550 WAX, LIQUID
| 8052-41-3 |
|
AHESIVE
| 78-93-3
141-78-6
108-88-3 |
|
|