Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Effects of Overexposure:SKIN RASH, IRRITATION.
======================= First Aid Measures =======================
First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITA TION PERSISTS, SEE PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM, OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.
Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT 40 F FOR 12 MONTHS. FOLLOW RECOMMENDED
CURING SCHEDULE.
Other Precautions:AVOID CONTACT WITH EYES OR SKIN.
Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT HANDLE
OR USE UNTIL MSDS HAS BEEN READ AND UNDERSTOOD.
Supplemental Safety and Health
KEY1:T6. FAILURE TO OBSERVE CAUTIONS MAY RESULT IN EXCESSIVE HEAT
BUILDUP WITH THE RELEASE OF TOXIC GASES.
HCC:B2
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01 MM
Vapor Density:NIL
Spec Gravity:>1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:BLUE PASTE WITH SLIGHT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN/CURING AGENT IN
BATCHES >1 LB. DON'T HEAT MIXED ADHESIVE >125 F UNLESS CURING
SURFACES TO BE BONDED.
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.