===================== Product Identification =====================
MSDS NAME:SYNTHITE AC-41
NIIN:00N003374
MSDS Number: BCJWM
=== Responsible Party ===
Company:JOHN C. DOLPH COMPANY
Address:WEST NEW RD
Box:267
City:MONMOUTH JUNCTION
State:NJ
ZIP:08852-9513
Country:US
CAGE:DO943
=== Contractor Identification ===
Company:JOHN C. DOLPH CO.
Address:WEST NEW RD
Box:267
City:MONMOUTH JUNCTION
State:NJ
ZIP:08852-9513
Country:US
CAGE:DO943
Company:JOHN C. DOLPH COMPANY
Address:NEW ROAD
Box:267
City:MONMOUTH JUNCTION
State:NJ
ZIP:08852
Country:US
Phone:908-329-2333
CAGE:72688
============= Composition/Information on Ingredients =============
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 0.05%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:COBALT (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 60%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:EXPOS TO SOLVENTS BY INHAL: MOD TOXIC(RATE 2
PER SAX). EYE/SKIN: IRRITANT BUT NOT CORROSIVE
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR IMMED,CALL DOCTOR. GIVE ARTIF RESP
OR OXYGEN IF NEC. SKIN: WASH,REMOVE CONTAMINATED CLOTHING & WASH
BEFORE REUSE. EYE: FLUSH W/ WATER FOR 15 MIN.
===================== Fire Fighting Measures =====================
Flash Point:81F;27C; TCC
Lower Limits:1
Upper Limits:7
Extinguishing Media:FOAM,DRY CHEM,WATER SPRAY,FOG.
Fire Fighting Procedures:USE AIR SUPPLIED RESCUE EQUIP FOR ENCLOSED
AREA
Unusual Fire/Explosion Hazard:COMBUSTIBLE-DO NOT MIX OR STORE W/ STRONG
OXIDANTS.
================== Accidental Release Measures ==================
Spill Release Procedures:IF EXTENSIVE,AVOID BREATHING VAPORS,MIX W/
SAND,PLACE IN DRUM & DISPOSE AS WASTE
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS CLOSED.& AWAY FROM
HEAT & OPEN FLAME. USE ONLY W/ ADEQUATE VEN. NO SMOKING OR OPEN
LIGHTS.
Other Precautions:WHEN APPLIED BY SPRAY METHODS,PARTICLES OF OVER SPRAY
MAY GENERATE EXCESS HEAT BY EXOTHERM. FILTERS & OTHER WASTE FROM
AREA-SOAK IN WATER & DISPOSE IN SAFETY CANS. KEEP AREA CLEAN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF REQUIRED.
Ventilation:LOCAL-FACE VELOCITY >60FPM. GENERAL-EXPLOSION PROOF EQUIP.
Protective Gloves:RUBBER
Eye Protection:CHEM GOG/FACE SPLSH SHLD
Other Protective Equipment:HYDROCARBON INSOLUBLE GLOVES & APRON SUCH AS
NEOPRENE
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:275-285F
Vapor Pres:<10
Vapor Density:3.66
Spec Gravity:0.9523
Evaporation Rate & Reference:0.75 (NBUAC=1)
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR AMBER COLOR-AROMATIC HYDROCARBON ODOR.
Percent Volatiles by Volume:60
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT & FIRE
Hazardous Decomposition Products:CO,CO*2 & POSSIBLY ACROLEIN & OXIDE OF
NITROGEN
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECOMMENDS SANITARY LANDFILL. DISPOSAL
METHOD MUST BE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|