===================== Product Identification =====================
MSDS NAME:50% CAUSTIC SODA-RAYON GRADE
NIIN:01-311-9756
MSDS Number: BPFMD
=== Responsible Party ===
Company:OCCIDENTAL CHEMICAL CO DIV OCCIDENTAL PETROLEUM
Address:CUSTOMER SERVICE, OCCIDENTAL TOWER
Box:809050
City:DALLAS
State:TX
ZIP:75380
Country:US
Info Phone Num:800-752-5151 / 716-286-3081
Emergency Phone Num:716-278-7021
CAGE:0AH54
=== Contractor Identification ===
Company:BURRIS CHEMICAL CO INC
Address:4200 AZALEA DR
Box:City:CHARLESTON
State:SC
ZIP:29415
Country:US
Phone:803-744-7421
CAGE:06746
Company:OCCIDENTAL CHEMICAL CORPORATION
Address:5005 LYNDON B JOHNSON FWY
Box:City:DALLAS
State:TX
ZIP:75244-6198
Country:US
Phone:800-752-5151/972-404-3800
CAGE:0AH54
============= Composition/Information on Ingredients =============
Name:SODIUM HYDROXIDE (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: 50%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 50%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT) IS 140-340 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE SOLID/LIQUID WILL BURN
EYES/SKIN/ RESPIRATORY TRACT. CAN CAUSE BLINDNESS. CAUSES
DESTRUCTIVE TISSUE DAMAGE AND SCARRING. MAY LEAD TO SKIN
DERMATITIS. INGESTION OF LIQUID OR MIST WILL CAUSE S EVERE BURNING
AND IRRITATION TO MUCOUS MEMBRANES, MOUTH, THROAT AND
GASTROINTESTINAL TRACT. CAN CAUSE SEVERE PNEUMONITIS
Explanation of Carcinogenicity:THE COMPONENTS OF THIS PRODUCT HAVE NOT
SHOWN ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:OVEREXPOSURE MAY LEAD TO RESPIRATORY
IRRITATION, NAUSEA, FATIGUE, DIZZINESS, HEADACHES, UNCONSCIOUSNESS,
DERMATITIS AND EYE IRRITATION. MATERIAL IS CORROSIVE AND WILL BURN
EXPOSED TISSUE. INGESTION MA Y RESULT IN ASTHMA-LIKE REACTIONS
(WHEEZING, COUGHING AND SHORTNESS OF BREATH).
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN DISORDER, EYE
DISORDERS, OR IMPARED RESPIRATORY FUNCTION SHOULD USE CAUTION WHEN
HANDLING OR USING THIS PRODUCT.
======================= First Aid Measures =======================
First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHALATION: REMOVE TO
FRESH AIR & RESTORE BREATHING IF NECESSARY. GET MEDICAL ATTENTION.
EYE : IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. INGESTION: DRINK WATER/MILK TO
DILUTE. DO NOT INDUCE VOMITING. NOTHING BY MOUTH IF
UNCONSCIOUS.CALL DR.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM OR DRY
CHEMICAL. THIS MATERIAL ITSELF IF NON-FLAMMABLE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA
AND FULL PROTECTIVE GEAR WHEN FGHTING ANY CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:CONTACT WITH SOME METALS MAY YIELD
EXPLOSIVE HYDROGEN GAS AND HIGH HEAT RELEASE.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL AND VACUUM RECOVER TO A SEPTIC
TANK TRUCK. DO NOT ALLOW RUNOFF TO A SEWER UNLESS MATERIAL IS
DILUTED AND NEUTRALIZED WITH DILUTE ACID SOLUTION.
Neutralizing Agent:5% ACETIC ACID (VINEGAR) OR OTHER MINERAL ACIDS LIKE
HCL.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY, VENTILATED WORK
AREA. KEEP CONTAINERS CLOSED WHEN NOT IN USE. PLACE STORAGE TANKS
IN A DIKED CONTAINMENT AREA.
Other Precautions:SPILLAGE CAN BE SLIPPERY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR FOR HANDLING MIST IF PROLONGED CONTACT WITH MATERIAL.
Ventilation:ADEQUATE ROOM VENTILATION SUFFICIENT TO MEET TLV.
Protective Gloves:NEOPRENE OR RUBBER GLOVES
Eye Protection:NO CONTACTS. USE CHEMICAL SAFETY GOGGLES
Other Protective Equipment:EYE WASH. CHEMICAL APRON IS RECOMMENDED.
FULL RUBBER BOOTS RECOMMENDED. DO NOT WEAR THIN RUBBER COVERS OVER
LEATHER SHOE
Work Hygienic Practices:DO NOT TAKE INTERNALLY. AVOID SKIN CONTACT.
WASH SKIN AFTER USING PRODUCT. DO NOT EAT, DRINK OR SMOKE IN WORK
AREA.
Supplemental Safety and Health
CORROSIVE LIQUID - AVOID CONTACT. CONTACT LENSES SHOULD NOT BE WORN
WHEN DEALING WITH THIS PRODUCT. KEEP EYE WASH AND QUICK DRENCH
SHOWER FACILITIES AVAILABLE WHEN WORKING WITHN THIS MATERIAL. BE
VERY CAUTIOUS WHEN MIXING THIS VERY CAUSTICSOLUTION WITH WATER -
EXOTHERMIC REACTION CAN EXCEED BOILING POINT OF WATER.
================== Physical/Chemical Properties ==================
HCC:B1
Boiling Pt:B.P. Text:289F,143C
Melt/Freeze Pt:M.P/F.P Text:53.8F,12.1C
Vapor Pres:13
Spec Gravity:1.54
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID WITH NO DISTINCT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, ACIDS, HALOGENATED ORGANICS, METALS SUCH AS ALUMINUM, TIN, ZINC,
ALDEHYDES, ORGANIC NITRO COMPOUNDS.
Stability Condition to Avoid:ANYTHING OTHER THAN NORMAL CONDITONS;
DIRECT CONTACT WITH ACIDS; METALS
Hazardous Decomposition Products:LIBERATES FLAMMABLE HYDROGEN GAS ON
CONTACT WITH ACTIVE METALS SUCH AS ZINC,ALUMINUM,TIN
==================== Disposal Considerations ====================
Waste Disposal Methods:NEUTRALIZED WASTE LIQUID COULD BE FLUSHED TO A
WASTE WATER TREATMENT SYSTEM VIA THE SEWER OR GIVEN TO A LICENSED
DISPOSAL CONTRACTOR. CONFORM TO ALL APPLICABLE REGULATIONS.
UNDILUTED MATERIAL IS A RCR A HAZARDOUS WASTE (CODE = D002).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SILICA GEL
| 63231-67-4 |
|
HELIUM
| |
|
SCRUBBER SOLUTION A
| 7664-41-7 |
|
SCRUBBER SOLUTION B
| |
|
ETHYL ALCOHOL
| 64-17-5 |
|
BATTERIES, WET, FILLED W/ALKALI, UN2795, 8, PG III
| 1310-58-3
7440-43-9
7440-02-0
7440-48-4 |
|
RINSE DRY
| |
|
810007, ROSS REFERENCE ELECTRODE FILLING SO
| 7447-40-7
7732-18-5 |
|
75-1626-847,DEVELOPER (DV-10) FOR KYOCERA(S
| 9003-07-0
1333-86-4
60676-50-0
1309-37-1
1314-13-2
68186-94-7 |
|
101B-NS
| 1344-28-1
13463-67-7
112945-52-5
1309-37-1 |
|
JET A-1
| |
|
JP-4
| 8008-20-6
64742-73-0 |
|
JET FUEL,JP-4
| 71-43-2
1330-20-7 |
|
JP-4
| 64742-48-9
64741-46-4
71-43-2 |
|
MILITARY AVIATION TURBINE FUEL JP-4
| 71-43-2
64741-41-9
64742-38-7
64742-89-8
64742-47-8
64742-81-0
95-63-6
110-54-3 |
|
RLB-12/14 OR A3-03-0167
| 1313-13-9
13530-65-9
1309-48-4 |
|
MC8001-10 SILICONE FLUID 31 CS
| 63148-62-9 |
|
ROYCO 885 A
| 103-24-2
82446-58-0
128-37-0 |
|
50% CAUSTIC SODA-RAYON GRADE
| 1310-73-2
7732-18-5 |
|
CAUSTIC SODA LIQUID, 50%
| 1310-73-2
7732-18-5 |
|
50% CAUSTIC SODA-DB
| 1310-73-2
7732-18-5 |
|
6040, ECP-PROCESS BLACK TYPE H TYPE V80 TON
| 64742-48-9 |
|
KLENZYME,1673
| 9014-01-1
1303-96-4
7732-18-5 |
|
CHEVRON UNIVERSAL GEAR LUBRICANT SAE 80W-90
| 9003-27-4 |
|
AMOCO MULTI-PURPOSE GEAR LUBRICANT 80W-90
| 64741-88-4
64742-01-4 |
|
CITGO PREMIUM GEAR OIL (MP) 80W-90; 31-310
| 64741-88-4 |
|
ABLEBOND 926-1
| 98-00-0
8052-41-3
13530-65-9 |
|
SCE-2
| 7647-14-5
7791-13-1
333-20-0 |
|
CONGO RED; CATALOG NO. C58025
| 573-58-0 |
|
CHLOROFORM; PRODUCT CODE 9182; C2915-02
| 67-66-3 |
|
ABLEBOND 163-4 & 163-4 LVFF PART B
| 108-95-2
112-24-3
8006-64-2 |
|
ABLEBOND 163-4 & 163-4 LVFF PART C
| 7440-50-8 |
|
5055, ALL PURPOSE CLEANER
| 110-54-3
68476-86-8 |
|
NO SCRATCH
| 71-55-6
8006-64-2
8012-95-1 |
|
ENERGIZER
| 1313-13-9
7439-97-6
21908-53-2
1310-73-2
1310-58-3
7440-66-6 |
|
TONER FOR CLASS II AND CLASS III (BLACK)
| 26655-10-7
25213-39-2
1333-86-4
84179-66-8
109125-50-0
109125-51-1 |
|
807526-18,PART A
| 1314-41-6 |
|
807526-18,PART B
| 7440-44-0
14808-60-7
1309-37-1
60676-86-0 |
|
807526-18,PART C
| |
|
74010 EPOXY RESIN SOLUTION
| 108-88-3
71-36-3
107-98-2
108-10-1
1330-20-7
111-40-0 |
|
PERCHLOROETHYLENE SVG
| 127-18-4
7665-72-7 |
|
CS 240 FIRESTOP SEALANT
| 68-12-2
471-34-1
70131-67-8
68952-53-4
50791-87-2 |
|
SPRAYMIST COOLANT, SM-81/82/83
| 64742-52-5
111-42-2 |
|
EPOXY TILE (BASE), EPOXY TILE HI-BUILD/PRIM
| 108-88-3
78-93-3
1330-20-7 |
|
EPOXY TILE ACTIVATOR,EPOXY TILE HI-BUILD/PR
| 1330-20-7
108-10-1
67-63-0 |
|
CLOROSOL
| 71-55-6 |
|
CEE-BEE SILICONE REMOVER C-105HF
| 64742-94-5
75-09-2
108-88-3
68584-22-5 |
|
STP OIL TREATMENT
| 19210-06-1
68783-96-0 |
|
AMOCO MULTI-PURPOSE GEAR LUBRICANT NO. 80W-
| 64741-88-4
64742-01-4 |
|
885A
| 25619-56-1
128-37-0 |
|
|