Search   
MSDS  : CEE-BEE SILICONE REMOVER C-105HF
CAS  : 64742-94-5
75-09-2
108-88-3
68584-22-5
NAME  : heavy aromatic naphtha
methylene chloride (sara iii)
toluene (sara iii)
(c10-c16) alkyl benzene sulfonic acid
===================== Product Identification =====================

MSDS NAME:CEE-BEE SILICONE REMOVER C-105HF
NIIN:00D002899
MSDS Number: BPFNV
=== Responsible Party ===
Company:MCGEAN-ROHCO INC CEE-BEE CHEMICAL DIV
Address:9520 E CEE BEE DR
City:DOWNEY
State:CA
ZIP:90241-5501
Country:US
Info Phone Num:213-803-4311
Emergency Phone Num:213-803-4311
Preparer's Name:H.B. HANS
CAGE:71361
=== Contractor Identification ===
Company:MCGEAN-ROHCO INC
Address:9520 E CEE BEE DR
Box:City:DOWNEY
State:CA
ZIP:90241-5501
Country:US
Phone:562-803-4311/FAX: 562-803-6701
CAGE:71361

============= Composition/Information on Ingredients =============

Name:HEAVY AROMATIC NAPHTHA
CAS:64742-94-5
RTECS #:WF3100000
Fraction by Wt: 50-60%
Other REC Limits:NONE RECOMMENDED

Name:METHYLENE CHLORIDE (SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 15-20%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <10%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:(C10-C16) ALKYL BENZENE SULFONIC ACID
CAS:68584-22-5
Fraction by Wt: 15-20%
Other REC Limits:NONE RECOMMENDED

===================== Hazards Identification =====================

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS CAN DAMAGE LIVER, KIDNEY OR
BLOOD. CORROSIVE TO EYES AND SKIN. POSSIBLE DERMATITIS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:VAPORS CAN ACSUE DIZZINESS, NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:FLOOD EYES WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. WASH SKIN WITH SOAP AND WATER. FOR INHALATION, REMOVE TO
FRESH AIR. IF SYMPTOMS PERSISTS, GET MEDICAL ATTENTION.

===================== Fire Fighting Measures =====================

Flash Point Method:TCC
Flash Point:149F,65C
Autoignition Temp:Autoignition Temp Text:UNKNON
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:FULL PROTECTIVE GEAR AND POSITIVE PRESSURE
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPOR/AIR MIXTURES POSSIBLE.

================== Accidental Release Measures ==================

Spill Release Procedures:ABSORB WITH AN INERT ABSORBENT SUCH AS
VERMICULITE. PLACE IN SUITABLE CONTAINER.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS IN A COOL
DRY, WELL VENTILATED AREA @ 32-90F. OPEN CONTAINERS SLOWLY AND WITH
CAUTION.
Other Precautions:NONE

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NIOSH OR MSHA APPROVED ORGANIC CARTRIDGES
RESPIRATOR.
Ventilation:SUFFICIENT TO KEEP BELOW TWA LIMITS.
Protective Gloves:NEOPRENE GLOVES
Eye Protection:CHEMICAL GOGGLES AND FACE SHIELD.
Other Protective Equipment:SUFFIECIENT TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
PROPER NAME: CORROSIVE LIQUID N.O.S., GROUP II.

================== Physical/Chemical Properties ==================

HCC:F6
Boiling Pt:B.P. Text:194F,90C
Melt/Freeze Pt:M.P/F.P Text:<0F,<-18C
Vapor Density:>1
Spec Gravity:0.97
pH:NA
Evaporation Rate & Reference:>1
Solubility in Water:EMULSIFIES
Appearance and Odor:CLEAR, REDDISH BROWN LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:80%

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NA
Stability Condition to Avoid:FLAMES.
Hazardous Decomposition Products:DIRECT CONTACT WITH FLAMES COULD FORM
PHOSGENE.

==================== Disposal Considerations ====================

Waste Disposal Methods:SEND TO AN EPA APPROVED WASTE DISPOSAL FACILITY.
FOLLOW ALL LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SILICA GEL 63231-67-4
HELIUM
SCRUBBER SOLUTION A 7664-41-7
SCRUBBER SOLUTION B
ETHYL ALCOHOL 64-17-5
BATTERIES, WET, FILLED W/ALKALI, UN2795, 8, PG III 1310-58-3
7440-43-9
7440-02-0
7440-48-4
RINSE DRY
810007, ROSS REFERENCE ELECTRODE FILLING SO 7447-40-7
7732-18-5
75-1626-847,DEVELOPER (DV-10) FOR KYOCERA(S 9003-07-0
1333-86-4
60676-50-0
1309-37-1
1314-13-2
68186-94-7
101B-NS 1344-28-1
13463-67-7
112945-52-5
1309-37-1
JET A-1
JP-4 8008-20-6
64742-73-0
JET FUEL,JP-4 71-43-2
1330-20-7
JP-4 64742-48-9
64741-46-4
71-43-2
MILITARY AVIATION TURBINE FUEL JP-4 71-43-2
64741-41-9
64742-38-7
64742-89-8
64742-47-8
64742-81-0
95-63-6
110-54-3
RLB-12/14 OR A3-03-0167 1313-13-9
13530-65-9
1309-48-4
MC8001-10 SILICONE FLUID 31 CS 63148-62-9
ROYCO 885 A 103-24-2
82446-58-0
128-37-0
50% CAUSTIC SODA-RAYON GRADE 1310-73-2
7732-18-5
CAUSTIC SODA LIQUID, 50% 1310-73-2
7732-18-5
50% CAUSTIC SODA-DB 1310-73-2
7732-18-5
6040, ECP-PROCESS BLACK TYPE H TYPE V80 TON 64742-48-9
KLENZYME,1673 9014-01-1
1303-96-4
7732-18-5
CHEVRON UNIVERSAL GEAR LUBRICANT SAE 80W-90 9003-27-4
AMOCO MULTI-PURPOSE GEAR LUBRICANT 80W-90 64741-88-4
64742-01-4
CITGO PREMIUM GEAR OIL (MP) 80W-90; 31-310 64741-88-4
ABLEBOND 926-1 98-00-0
8052-41-3
13530-65-9
SCE-2 7647-14-5
7791-13-1
333-20-0
CONGO RED; CATALOG NO. C58025 573-58-0
CHLOROFORM; PRODUCT CODE 9182; C2915-02 67-66-3
ABLEBOND 163-4 & 163-4 LVFF PART B 108-95-2
112-24-3
8006-64-2
ABLEBOND 163-4 & 163-4 LVFF PART C 7440-50-8
5055, ALL PURPOSE CLEANER 110-54-3
68476-86-8
NO SCRATCH 71-55-6
8006-64-2
8012-95-1
ENERGIZER 1313-13-9
7439-97-6
21908-53-2
1310-73-2
1310-58-3
7440-66-6
TONER FOR CLASS II AND CLASS III (BLACK) 26655-10-7
25213-39-2
1333-86-4
84179-66-8
109125-50-0
109125-51-1
807526-18,PART A 1314-41-6
807526-18,PART B 7440-44-0
14808-60-7
1309-37-1
60676-86-0
807526-18,PART C
74010 EPOXY RESIN SOLUTION 108-88-3
71-36-3
107-98-2
108-10-1
1330-20-7
111-40-0
PERCHLOROETHYLENE SVG 127-18-4
7665-72-7
CS 240 FIRESTOP SEALANT 68-12-2
471-34-1
70131-67-8
68952-53-4
50791-87-2
SPRAYMIST COOLANT, SM-81/82/83 64742-52-5
111-42-2
EPOXY TILE (BASE), EPOXY TILE HI-BUILD/PRIM 108-88-3
78-93-3
1330-20-7
EPOXY TILE ACTIVATOR,EPOXY TILE HI-BUILD/PR 1330-20-7
108-10-1
67-63-0
CLOROSOL 71-55-6
CEE-BEE SILICONE REMOVER C-105HF 64742-94-5
75-09-2
108-88-3
68584-22-5
STP OIL TREATMENT 19210-06-1
68783-96-0
AMOCO MULTI-PURPOSE GEAR LUBRICANT NO. 80W- 64741-88-4
64742-01-4
885A 25619-56-1
128-37-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net