===================== Product Identification =====================
MSDS NAME:BRAKE FLUID DOT 3
NIIN:00-231-9071
MSDS Number: BPXWP
=== Responsible Party ===
Company:ASHLAND CHEMICAL CO
Box:2219
City:COLUMBUS
State:OH
ZIP:43215
Country:US
Info Phone Num:614-790-3333
Emergency Phone Num:614-790-3333
CAGE:34897
=== Contractor Identification ===
Company:ASHLAND CHEMICAL CO
Box:2219
City:COLUMBUS
State:OH
ZIP:43216-2219
Country:US
Phone:614-790-3333/800-274-5263
CAGE:34897
Company:CHEMICAL SPECIALISTS AND DEVELOPMENT INC
Address:2210 HACKBERRY LN
Box:687
City:CONROE
State:TX
ZIP:77305
Country:US
Phone:409-756-1065
CAGE:4N760
============= Composition/Information on Ingredients =============
Name:TRIETHYLENE GLYCOL MONOBUTYL ETHER
CAS:143-22-6
Fraction by Wt: 44-54%
Other REC Limits:NONE RECOMMENDED
Name:DIETHYLENE GLYCOL MONOBUTYL ETHER
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: 16-26%
Other REC Limits:NONE RECOMMENDED
Name:DIETHYLENE GLYCOL
CAS:111-46-6
RTECS #:ID5950000
Fraction by Wt: 5-15%
Other REC Limits:NONE RECOMMENDED
Name:DIETHYLENE GLYCOL MONOPROPYL ETHER
CAS:6881-94-3
Fraction by Wt: 0-10%
Other REC Limits:NONE RECOMMENDED
Name:DIETHYLENE GLYCOL MONOETHYL ETHER
CAS:111-90-0
RTECS #:KK8750000
Fraction by Wt: 0-7%
Other REC Limits:NONE RECOMMENDED
Name:TRIETHYLENE GLYCOL MONOETHYL ETHER
CAS:112-50-5
Fraction by Wt: 0-7%
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN:
PROLONGED OR REPEATED CONTACT CAN CAUSE MODERATE IRRITATION,
DEFATTING, DERMATITIS. INHALATION: NONE CURRENTLY KNOWN. INGESTION:
MAY CAUSE GASTROINTESTINAL IRRITATION . ORAL TOXICITY IS LOW.
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION, DEFATTING,
DERMATITIS. INHALATION: NONE CURRENTLY KNOWN. INGESTION:
GASTROINTESTIONAL IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS GET MEDICAL ATTENTION. SKIN: WASH AREA WITH SOAP AND
WATER. INHALATION: MOVE TO FRESH AIR. INGESTION: DRINK 2 GLASSES OF
WATER. INDUCE V OMITING. GET MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:250F,121C
Extinguishing Media:ALCOHOL FOAM, WATER FOG, CARBON DIOXIDE, DRY
CHEMICAL.
Fire Fighting Procedures:WATER OR FOAM MAY CAUSE FROTHING WHICH CAN BE
VIOLENT AND ENDANGER THE LIFE OF THE FIREFIGHTER, ESPECIALLY IF
SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID.
Unusual Fire/Explosion Hazard:WATER OR FOAM MAY CAUSE FROTHING WHICH
CAN BE VIOLENT AND ENDANGER THE LIFE OF THE FIREFIGHTER, ESPECIALLY
IF SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB SMALL SPILLS WITH ABSORBENT MATERIAL.
DIKE LARGE SPILLS TO PREVENT RUN-OFF TO SEWERS, STREAMS OR OTHER
BODIES OF WATER. PUMP LIQUID TO SALVAGE TANK. ABSORB RESIDUE WITH
ABSORBENT. DEPOSITE WAST E IN PROPER CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN WELL VENTILATED AREA AWAY
FROM IGNITION SOURCE AND STRONG OXIDIZING AGENTS. PROTECT FROM
PHYSICAL DAMAGE. KEEP CONTAINERS CLOSED.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTIED. EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR, LIQUID,
SOLID). NEVER USE WELDING OR CUTTING TORCH ON OR NEAR THESE
CONTAINERS BECAUSE PRO DUCT OR RESIDUE CAN IGNITE EXPLOSIVELY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Protective Gloves:NOT REQUIRED UNDER NORMAL USE.
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:WEAR NORMAL WORK CLOTHING COVERING ARMS AND
LEGS.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:V6
Boiling Pt:B.P. Text:401F,205C
Spec Gravity:1.036
Evaporation Rate & Reference:<1 (ETHER=1)
Appearance and Odor:CLEAR AN COLORLESS LIQUID.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NEVER USE WELDING OR CUTTING TORCH ON OR
NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN RESIDUE) CAN IGNITE
EXPLOSIVELY.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC.
Conditions to Avoid Polymerization:CANNOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. IF A RUN-OFF TO SEWERS, STREAMS OR OTHER
BODIES OF WATER, NOTIFY PROPER AUTHORITIES AS REQUIRED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-2
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-2
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-2
| |
|
CLEANING COMP SOLVENT TYPE IIA
| 76-13-1
124-38-9 |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-4
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-2
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-8
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-5
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-3
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-5
| |
|
CHLORPROMAZINE HYDROCHLORIDE, THORAZINE
| 69-09-0 |
|
P382500 POTASSIUM PHOSPHATE MONOBASIC
| 7778-77-0 |
|
3110 RTV SILICONE RUBBER
| 14464-46-1
14808-60-7
68855-54-9
21645-51-2
682-01-9 |
|
S343500 SODIUM NITRATE
| 7631-99-4 |
|
2,2,4-TRIMETHYLPENTANE
| 540-81-1 |
|
044160-00349 UNLEADED PREMIUM GASOLINE
| 8006-61-9
71-43-2
108-88-3
1330-20-7 |
|
DIOCTYL PHTHALATE
| 117-81-7 |
|
SN63
| 7440-31-5
7439-92-1
7440-36-0
7440-69-9
7440-43-9
7440-22-4 |
|
TROWLEZE
| 14808-60-7
66402-68-4
6834-92-0 |
|
90-S SUPER DEMON AIR WET SET
| 14808-60-7
14464-46-1
60676-86-0
112945-52-5
14940-68-2
7782-42-5 |
|
BRIKCAST 3000
| 1344-28-1
14464-46-1 |
|
GLYCERIN G-31 G153 G32 G33
| 56-81-5 |
|
G-4638 RED INSULATING VARNISH
| 64742-88-7
1309-37-1
1317-65-3
66070-65-3 |
|
#44 RESIN CORE SOLDER
| 8050-09-7
7440-31-5
7439-92-1
7440-36-0
7440-69-9
7440-50-8 |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-4
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-4
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-4
| |
|
CARBON-ZINC (C-ZN) (LECLANCHE) BATTERY,BA-4
| |
|
175-0000 C-132 DEVELOPER/REPLENISHER CONCEN
| 1310-58-3
10043-35-3 |
|
175-0000, C-132 DEVELOPER REPLENISHER CONCE
| 28427-24-9
112-27-6
123-31-9 |
|
PACKING MATERIAL
| 12001-29-5
7782-42-5 |
|
347 STAINLESS STEEL BARE WELDING WIRE
| 1333-86-4
7440-47-3
7440-02-0
7439-98-7
7439-96-5
60676-86-0
7440-50-8
1309-37-1
7440-25-7 |
|
3M BRAND DRY SILVER PAPER TYPE 7770
| 2489-05-6
63148-65-2
9004-35-7
119-47-1
112-85-6
7789-47-1
1600-27-7 |
|
BRAKE FLUID DOT 3
| 143-22-6
112-34-5
111-46-6
6881-94-3
111-90-0
112-50-5 |
|
SUPERLUBE 518, CENEX, ECONEX, HI-TAC
| 108-95-2
1330-20-7
68855-45-8 |
|
PENETRATING OIL 597D (VV-P-216B TYPE 1)
| 8002-05-9
30560-19-2
108-95-2 |
|
D-76B DEVELOPER
| |
|
CARBON DIOXIDE (CO*2): TECHNICAL
| 124-38-9 |
|
#44 RESIN CORE SOLDER
| 8050-09-7 |
|
THIOUREA ACS REAGENT, 4123
| 62-56-6 |
|
SODIUM ACETATE, ANHYDROUS
| 126-96-5 |
|
SULFAMIC ACID
| 5329-14-6 |
|
#44 RESIN CORE SOLDER
| 8050-09-7 |
|
NITROGEN
| 7727-37-9 |
|
REMOVE-IT WAX SOLVENT
| |
|
NICKEL-CADMIUM (NI-CD) BATTERY,SEALED,4VB60
| |
|
HYSOL PC20 STD
| 1330-20-7
108-88-3
78-93-3 |
|
MERCURIC OXIDE CELL
| 21908-53-2
7439-97-6
1310-58-3
7440-66-6
1313-13-9 |
|
LEAK-TEC 372 E
| |
|
NICKEL-CADMIUM (NI-CD) BATTERY,VENTED,BB-40
| |
|
|