Effects of Overexposure:MFR STATES MATL IS LOW IN TOXICITY. IS
ANESTHETIC & INHAL OF HI CONC CAN PRODUCE ASPHYXIATION.
======================= First Aid Measures =======================
First Aid:INH:MOVE TO FRESH AIR, GIVE ART RESP, CALLMD. DO NOT GIVE
ADRENAIN(EPINEPHRINE). EYES:FLUSH W/LRG AMTS WATER 15 MINS.
SKIN:WASH W/WATER. ING:IF CONSCIOUS IMMED INDUCE VOMITING BY GIVING
2 TO 4 GLASSES OF WATER, CALL MD. (SEE OTHER PREC)
===================== Fire Fighting Measures =====================
Flash Point:NOT FLAMMABLE
Extinguishing Media:CO*2, OR FOAM.(SEE SUPP DATA)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:USE WATER SPRAY TO KEEP CONTAINERS COOL,
TO KEEP SPILLAGE AWAY FROM FIRE & HEAT & TO KNOCK DOWN VAPS
Spill Release Procedures:VACATE AREA, ALLOW TO EVAPORATE & WASH OFF
AREA W/WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:MFR STATES NO SPECIAL PRECAUTIONS ARE
REQUIRED IN THE NORMAL HANDLING & USE OF THIS PRODUCT.DO NOT USE
NEAR ARC WELDING,OPEN FLAMES,HOT SURFACES.
Other Precautions:EXCESSIVE SKIN CONTACT CAN PRODUCE DEFATTING.
SPLASHING IN EYES CAN PRODUCE TEMPORARY MILD IRRITATION. MFR STATES
PRODUCT IS NOT A HAZARDOUS SUBSTANCE VIA DEFINITION. NO SMOKING IN
AREA OF USE
Respiratory Protection:MFR STATES NONE REQUIRED FOR NORMALLY VENTED
WORK SITUATIONS.
Ventilation:ADEQUATE VENT TO MAINTAIN LEVELS BELOW TLV.
Protective Gloves:PVC OR NEOPRENE
Eye Protection:TO PRVNT CONTACT W/LIQUID
Supplemental Safety and Health
BP:46-82C. FL PT:HOWEVER, IF 80% OF SOLVENT EVAPORATES, THE REMAINING
MIXTURE EXHIBITS FL PT OF APPROX 122F,50C. VAP PRESS IS MEASURED AT
70F,21C.HEAT/UV RADIATION POSS FORM HZRD DECOMP PRODS.
Boiling Pt:B.P. Text:115-180F
Vapor Pres:385
Vapor Density:5.0
Spec Gravity:1.42
Evaporation Rate & Reference:10
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS LIQUID W/ETHEREAL & FAINT ALCOHOL ODOR.
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AL POWDER,LI SHAVINGS,POWDERED TI,FINELY DIVIDED BA.
Stability Condition to Avoid:WILL DECOMPOSE AT TEMPS ABOVE 250F,121C.
Hazardous Decomposition Products:HALOGENS, HALOGEN ACIDS, POSSIBLE
PHOSGENE.
Waste Disposal Methods:DISPOSAL METHOD MUST BE IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.