===================== Product Identification =====================
MSDS NAME:TRANSFORMER, POWER, 06719 (REVR), NE 6541,
NIIN:00-679-0163
MSDS Number: BQDZX
=== Responsible Party ===
Company:EDO CORP, GOVT SYSTEMS DIV
Address:14-04 111TH ST
City:COLLEGE POINT
State:NY
ZIP:11356-1434
Country:US
Info Phone Num:718-321-4000
Emergency Phone Num:718-321-4000
Preparer's Name:DSGS-SSH
CAGE:82340
=== Contractor Identification ===
Company:EDO CORP, GOVT SYSTEMS DIV
Address:14-04 111TH ST
Box:City:COLLEGE POINT
State:NY
ZIP:11356-1434
Country:US
Phone:718-321-4000
CAGE:82340
Company:NEW ENGLAND TRANSFORMER CO.
Box:UNKNOW
CAGE:NO761
============= Composition/Information on Ingredients =============
Name:POLYCHLORINATED BIPHENYLS (PCBS) (SARA III)
CAS:1336-36-3
RTECS #:TQ1350000
Other REC Limits:NONE SPECIFIED
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 (ORAL RAT) IS 8.65 - 11.9 G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HEATED MATERIAL MAY GIVE OF VAPORS
WHICH ARE IRRITATING TO EYE, SKIN AND RESPIRATORY TRACT. MAY BE
ABSORBED THROUGH SKIN. MAY CAUSE DRYING AND CRACKING OF SKIN AND
POSSIBLE CHLORACNE. MATERIAL MAY CAU SE REPRODUCTIVE DISFUNCTION,
LIVER DISORDERS, AND POSSIBLE CANCER.
Explanation of Carcinogenicity:POLYCHLORINATED BIPHENYLS (PCB'S) ARE
SUSPECT CARCINOGENS.
Effects of Overexposure:PCB'S MAY CAUSE IRRITATION OF THE EYES, SKIN,
RESPIRATORY TRACT. PCB'S CAN BE ABSORBED THROUGH THE SKIN CAUSING
DRYING, CRACKING AND POSSIBLE CHLORACNE.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN, OR
LIVER DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.
======================= First Aid Measures =======================
Eyes: FLUSH WITH RUNNING WATER FOR 15 MINUTES WHILE HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION IMMEDIATELY. SKIN: WASH WITH
SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. GET MEDICAL ADVICE.
INHALATIO N: REMOVE TO FRESH AIR. GET MEDICAL ADVICE. INGESTION: DO
NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:>275F,>135C
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION MAY PRODUCE HAZARDOUS FUMES
AND VAPORS OF DECOMPOSITION PRODUCTS, INCLUDING CHLORINATED DIOXINS
AND DIBENZOFURANS.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. PLACE WASTE IN DOT
APPROVED CONTAINER FOR DISPOSAL WHICH IS STRICTLY REGULATED BY
FEDERAL REGULATIONS.
Neutralizing Agent:SPECIAL CHEMICAL PROCESSES
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY, AREA. DO NOT
OPEN PACKAGE NOR PUT IN SERVICE. USED ITEMS CONTAINING PCB'S
RETIRED FROM SERVICE SHOULD BE TURNED IN FOR DISPOSAL.
Other Precautions:AVOID DIRECT, PROLONGED AND REPEATED CONTACT WITH
MATERIAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NORMAL USE DOES NOT REQUIRE THE USE OF A
RESPIRATOR. USE A NIOSH/MSHA APPROVED RESPIRATOR AS PER CURRENT 29
CFR 1910.134, INSTRUCTIONS/WARNINGS AND NIOSH-RESPIRATOR SELECTION
IF VAPOR OR MIST INHALATI ON IS ANTICIPATED.
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:RUBBER GLOVES IF PCB CONTACT IS LIKELY.
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
WORK CLOTHING AND APRON AS REQUIRED TO AVOID PROLONGED OR REPEATED
CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING OR DRINKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WASH IMMEDIATELY ON CONTACT WITH MATERIAL. AVOID CONTACT. NOTE! PCB'S
AND PCB CONTAMINATED MATERIALS ARE STRICTLY REGULATED BY FEDERAL
LAW. CONTAINERS OF THIS MATERIALS MUST BE SPECIFICALLY MARKED IN
ACCORDANCE WITH APPLICABLE REULATIONS UNDER TSCA AND OTHER FEDERAL,
STATE, AND LOCAL LAWS.
================== Physical/Chemical Properties ==================
HCC:T6
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.18-1.56
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TEST VOLTS = 14KV RMS
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
VERY STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:VERY HIGH HEAT, OPEN FLAMES AND OTHER
SOURCES OF IGNITION
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE,
HCL, PHENOLICS, ALDEHYDES, OTHER TOXIC COMPOUNDS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL OF PCB'S IS STRICTLY REGULATED BY
FEDERAL LAW AND REGULATIONS UNDER TSCA. (40CFR 761). STATE AND
LOCAL LAWS MAY ALSO APPLY. CONSULT THE PROPER AUTHORITIES REGARDING
STORAGE AND DISPOSAL AND A NY PCB OR PCB CONTAMINATED ITEM.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|