MSDS   : DOW CORNING 1-2531 RELEASE COATING CAS   : 108-88-3 97-85-8 8030-30-6 107-98-2 NAME   : toluene (sara iii) isobutyl isobutyrate naphta (petroleum spirits or benzin) propylene glycol monomethyl ether
===================== Product Identification =====================
MSDS NAME:DOW CORNING 1-2531 RELEASE COATING
NIIN:00N006272
MSDS Number: BCMJZ
=== Responsible Party ===
Company:DOW CORNING CORPORATION
Address:3901 SOUTH SAGINAW ROAD
Box:997
City:MIDLAND
State:MI
ZIP:48640
Country:US
Info Phone Num:517-496-5900
Emergency Phone Num:517-496-5900
CAGE:5D028
=== Contractor Identification ===
Company:DOW CORNING CORP
Address:3901 S SAGINAW RD
Box:997
City:MIDLAND
State:MI
ZIP:48686-0997
Country:US
Phone:517-496-6000/517-496-6315
CAGE:5D028
Company:DOW CORNING CORP
Address:2200 W SALZBURG RD
Box:City:AUBURN
State:MI
ZIP:48611
Country:US
Phone:517-496-4388
CAGE:71984
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <15%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ISOBUTYL ISOBUTYRATE
CAS:97-85-8
RTECS #:NQ5250000
Fraction by Wt: <15%
Name:NAPHTA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:VL8047000
Fraction by Wt: <50%
OSHA PEL:100 PPM
Name:PROPYLENE GLYCOL MONOMETHYL ETHER
CAS:107-98-2
RTECS #:UB7700000
Fraction by Wt: <15%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE SLIGHT ANESTHESIA,ETC. MAY IRRITATE
SKIN & EYES.
======================= First Aid Measures =======================
First Aid:INHALATION- REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION.
SKIN & EYES- FLUSH W/WATER.
===================== Fire Fighting Measures =====================
Flash Point:40F (CLOSED CUP)
Lower Limits:1.2
Upper Limits:6.7
Extinguishing Media:CO*2 OR FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:MOP,WIPE OR SOAK W/ABSORBENT MATERIAL USING
PROPER PROTECTIVE EQUIPMENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:SAME AS FOR ANY FLAMMABLE PRODUCT. USE
REASONABLE CARE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ORGANIC VAPOR TYPE
Ventilation:GENERAL MECHANICAL
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED BY YOUR COMPANY.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:230F
Vapor Pres:25
Spec Gravity:0.85
Evaporation Rate & Reference:<1 (ETHER)
Solubility in Water:<0.1%
Appearance and Odor:LIQUID- SOLVENT ODOR
Percent Volatiles by Volume:>10
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Hazardous Decomposition Products:SIO*2,CO*2 & TRACES OF INCOMPLETELY
BURNED CARBON PRODUCTS.
==================== Disposal Considerations ====================
Waste Disposal Methods:REFER TO LOCAL REGULATIONS. & STATUTES RELATIVE
TO SOLVENT DISPOSAL. RESIDUE FROM EVAPORATED SOLVENT CAN BE LAND
FILLED OR BURNED IAW LOCAL REGULATIONS. WASTE DISPOSAL MUST BE IAW
FEDERAL,STATE & LOCA L CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***
ALL PAGES On Chemical Property IN THIS GROUP