===================== Product Identification =====================
MSDS NAME:HEAT CONDUCTIVE GREASE (PART NO. 107408)
NIIN:00N006282
MSDS Number: BCMKM
=== Responsible Party ===
Company:ELLIOTS (DIVISION OF TRADE SHOWS,INC.)
Emergency Phone Num:218-475-2237
CAGE:6A397
=== Contractor Identification ===
Company:ELLIOTS (DIVISION OF TRADE SHOWS,INC.)
CAGE:6A397
============= Composition/Information on Ingredients =============
Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
===================== Hazards Identification =====================
Effects of Overexposure:PROD IS AN INERT,NON-TOX GREASE. HAVE NEVER
EXPERIENCED SKIN IRRIT IN > 11 YRS PRODUCTN & PACKAGING.
======================= First Aid Measures =======================
First Aid:RINSE FROM SKIN W/SAFE PETROLEUM PRODUCTS (E.G. KEROSENE,FUEL
OIL) & WASH W/SOAP & WATER.
===================== Fire Fighting Measures =====================
Flash Point:450F COC (FLUID)
Extinguishing Media:CO*2 OR DRY CHEMICAL OR FOAM
Fire Fighting Procedures:DO NOT BREATHE FUMES
Unusual Fire/Explosion Hazard:N.D.
================== Accidental Release Measures ==================
Spill Release Procedures:USE STANDARD OIL & GREASE SPILL PROCEDURE
USING ANY ACCEPTED LOCAL WASTE DISPOSAL METHOD.
====================== Handling and Storage ======================
Handling and Storage Precautions:DONT STORE NEAR OPEN FLAMES/HEAT.
AVOID PROLONGED SKIN CONT. MATRL CANNOT BE REMOVED FROM CLOTHING
W/O DRY CLEANING.
Other Precautions:PROTECTIVE GLOVES & EQUIPMENT: PROTECTIVE
CLOTHING,GLOVES,ETC. IS ADVISABLE BECAUSE MATERIAL IS DIFFICULT TO
REMOVE FROM SKIN & CLOTHING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NO
Ventilation:NO
Protective Gloves:SEE OTHR PRECAU
Eye Protection:KEEP OUT OF EYES.
Other Protective Equipment:SEE OTHR PRECAUTNS
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Appearance and Odor:ALUMINUM COLOR, PLEASANT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & HALOGENS
Stability Condition to Avoid:OPEN FLAME & HIGH HEAT
Hazardous Decomposition Products:CO, CO*2
==================== Disposal Considerations ====================
Waste Disposal Methods:MATERIAL CAN BE BURNED OR DISPOSED. WASTE
DISPOSAL MUST BE IAW FEDERAL,STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|