===================== Product Identification =====================
MSDS NAME:822
NIIN:00N012210
MSDS Number: BQPBQ
=== Responsible Party ===
Company:DRILUBE COMPANY
Address:711 WEST BROADWAY
City:GLENDALE
State:CA
ZIP:91204
Country:US
Info Phone Num:213-245-1804
Emergency Phone Num:213-245-1804
Preparer's Name:RON LUCAS
CAGE:HO746
=== Contractor Identification ===
Company:DRILUBE CO
Address:711 W BROADWAY
Box:City:GLENDALE
State:CA
ZIP:91204-1009
Country:US
Phone:818-240-8144
CAGE:06186
Company:DRILUBE COMPANY
Address:711 WEST BROADWAY
Box:City:GLENDALE
State:CA
ZIP:91204
Country:US
Phone:213-245-1804
CAGE:HO746
============= Composition/Information on Ingredients =============
Name:FLUOROSILICONE OIL
CAS:63148-56-1
Fraction by Wt: 60%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
Name:FLUOROTELOMER.DUPONT REGISTRY NUMBER 22-57-5.
Fraction by Wt: 40%
Other REC Limits:N/K
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:MAY CAUSE TEMPORARY DISCOMFORT TO EYES.
SKIN/INGESTION/INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K
======================= First Aid Measures =======================
Eyes:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.SKIN:N/K
.INGESTION:CALL MD IMMEDIATELY . INHALATION:REMOVE TO FRESH
AIR.SUPPORT BREATHING (GIVE O2/ARTIFICIAL RESPIRATION) .
===================== Fire Fighting Measures =====================
Flash Point Method:OC
Flash Point:>250F,121C
Extinguishing Media:CARBON DIOXIDE OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:FLUORINE
PRODUCTS,SIO2,CO2,PFIB,TFE,HFP AND OLIGOMERS FROM THE TELOMER MAY
BE GENERATED AT TEMPERATURES ABOVE 400F,204C.
================== Accidental Release Measures ==================
Spill Release Procedures:MOP,WIPE OR SOAK WITH ABSORBENT MATERIAL.
Neutralizing Agent:N/K
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID THE CONTAMINATION OF TOBACCO
PRODUCTS WITH THE GREASE WHEN HANDLING.
Other Precautions:TOXIC VAPORS MAY BE EVOLVED AT TEMPERATURES ABOVE
550F, 288C.PROVIDE ADEQUATE VENTILATION IF TEMPERATURES ARE LIKELY
TO EXCEED THIS POINT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:USE POSITIVE VENTILATION SYSTEM TO REMOVE ALL FUMES WHEN
FLUOROTELOMER COATINGS ARE HEATED ABOVE 400F,204C.
Protective Gloves:N/K
Eye Protection:CHEMICAL WORKER GOGGLES .
Other Protective Equipment:AS REQUIRED BY YOUR COMPANY.
Work Hygienic Practices:N/K
Supplemental Safety and Health
ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:300F,149C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:5 MMHG
Spec Gravity:1.48 (WATER=1)
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:0.1%
Appearance and Odor:TRANSLUCENT,WHITE GREASE WITH VERY LITTLE ODOR.
Percent Volatiles by Volume:<1
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:AVOID OPEN FLAMES OR HIGH TEMPERATURES
UNLESS IN WELL VENTILATED AREA.
Hazardous Decomposition Products:FLUORINE
PRODUCTS,SIO2,CO2,PFIB,TFE,HFP AND OLIGOMERS FROM THE TELOMER MAY
BE GENERATED AT TEMPERATURES >400F,204C.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .CAN BE LANDFILLED OR BURNED IN
ACCORDANCE WITH LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|