LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART
1500. NEITHER THE PRODUCT NOR ANY OF THE INGREDIENTS HAS BEEN FOUND
TO BE A CARCINOGEN OR POTENT IAL CARCINOGEN BY NTP, IARC, OR OSHA.
THE PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: IMMEDIATELY FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15
MIN. SEEK ASSITANCE FROM MD . SKIN: FLUSH WITH COPIOUS AMOUNTS OF
WATER. SEE MD . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP). INGEST: CALL MD IMMEDIATELY .
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:84.0F,28.9C
Lower Limits:2.2 %
Upper Limits:14.0%
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Respiratory Protection:NONE UNDER NORMAL USE CONDITIONS. NIOSH/MSHA
APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NONE UNDER NORMAL USE CONDITIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
HCC:F4
Boiling Pt:B.P. Text:207F,97C
Vapor Pres:13 @ 20C
Vapor Density:2.07 @ 20C
Spec Gravity:0.8044 (H*2O=1)
Evaporation Rate & Reference:1.3 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS MOBILE LIQUID WITH MILD ALCOHOL
ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods:DISCARD AS SOLID WASTE. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.