Search   
MSDS  
:
 RL7520 SILICONE ALUMINUM COATED CLOTH (#108
CAS  
:
 
NAME  
:
 glass fibers
silicone rubber
aluminum/silicone rubber
=====================  Product Identification  =====================

MSDS NAME:RL7520 SILICONE ALUMINUM COATED CLOTH (#108
NIIN:00-678-4185
MSDS Number: BQVPH
=== Responsible Party ===
Company:R M ENGINEERED PRODUCTS INC
Address:4854 O'HEAR AVE
Box:5205
City:NORTH CHARLESTON
State:SC
ZIP:29406
Country:US
Info Phone Num:803-744-6261
Emergency Phone Num:803-744-6261
Preparer's Name:JACK FANNING
CAGE:10009
=== Contractor Identification ===
Company:AEROFAB CO INC.
Address:2335 GOODRICH ST
Box:City:FERNDALE
State:MI
ZIP:48220-1440
Country:US
Phone:313-542-0051
CAGE:01685
Company:R M ENGINEERED PRODUCTS, INC.
Address:4854 O'HEAR AVENUE
Box:City:NORTH CHARLESTON
State:SC
ZIP:29405
Country:US
Phone:843-744-6261
CAGE:10009
Company:RM ENGINEERED PRODUCTS INC
Address:4854 O HEAR AVE
Box:City:NORTH CHARLESTON
State:SC
ZIP:29406
Country:US
Phone:803-744-6261
CAGE:0DCP7

=============  Composition/Information on Ingredients  =============

Name:GLASS FIBERS
Other REC Limits:NONE SPECIFIED

Name:SILICONE RUBBER
Other REC Limits:NONE RECOMMENDED

Name:ALUMINUM/SILICONE RUBBER
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE GIVEN BY MANUFACTURER (SUPPLIER).
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NON-HAZARDOUS. GLASS FIBERS IN THE
    CLOTH MAY CAUSE MECHANICAL IRRITATION OF SKIN, NOSE AND THROAT.
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:MFR SAID "NOT APPLICIABLE" IN THIS
    FIELD.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR. EYE CONTACT:FLUSH WITH WATER
    FOR 15 MINUTES. GET MEDICAL HELP. SKIN CONTACT:WASH WITH SOAP AND
    WATER. GET MED ATTENTION IF SYMPTOMS PERSIST. INGESTION: GET
    MEDICAL HELP  IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:>482F,>250C
Extinguishing Media:WATER, FOAM, DRY CHEMICALS.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR PROTECTIVE CLOTHING
    AND SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:MFR SAID "NOT APPLICIABLE" IN THIS FIELD.
Neutralizing Agent:NONE GIVEN BY MANUFACTURER (SUPPLIER).

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:GENERAL OR LOCAL IF CREATING DUST.
Protective Gloves:NOT REQUIRED
Eye Protection:NOT REQUIRED
Other Protective Equipment:NONE REQUIRED
Work Hygienic Practices:KEEP WORK AREA FREE OF DUST ACCUMULATION.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER ONE SIDE, RED THE OTHER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZER TEND TO AGE RUBBER PREMATURELY.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SMOKE, OXIDES OF CARBON AND SILICON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:NO SPECIAL PROCEDURE REQUIRED

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
PACKING MATERIAL 12001-29-5
7440-44-0
7440-66-6
CHEVRON DIESEL FUEL #2 68476-34-6
64741-44-2
64742-80-9
8008-20-6
64742-81-0
64741-59-9
SODIUM THIOSULFATE PENTAHYDRATE, 99.5% ACS 10102-17-7
BRAYCO MICRONIC 783E 1330-78-5
TP 35 TAPE PATH AND DRIVE CLEANING SOLUTION 76-13-1
67-63-0
75-52-5
CALIBRATION GAS,2% METHANE IN AIR,456236 74-82-8
NICKEL-CADMIUM SEALED CELL BATTERY 7440-43-9
7440-02-0
1310-58-3
NITROGEN 7727-37-9
RL7520 SILICONE ALUMINUM COATED CLOTH (#108
IEG4 SODA LIME CARTRIDGE 1305-78-8
1310-73-2
SILICON 1000 PPM (0.100% W/V), 6939 7732-18-5
7440-21-3
HYDROFLUORIC ACID 20%, ANHYDROUS, A-147 7664-39-3
7732-18-5
E557 ELECTRO KLENE 75-45-6
76-13-1
CITRIC ACID USP/FCC GRANULES 77-92-9
BLACK UNTREATED NYLON SLEEVING 3323-53-3
PEACH GLUE SPECIAL PURPOSE FLOOR COVERING ( 25265-77-4
9003-01-4
131-52-2
PD ACTIVATOR, 28-0080 100-51-6
107-21-1
107-41-5
112-80-1
141-43-5
929-06-6
DAMP MOP 67-63-0
WEDJETS (ALL COLORS)
WEDJETS (ALL COLORS)
DEXRON-II AUTOMATIC TRANSMISSION FLUID,AB 7 64741-89-5
64741-88-4
8012-95-1
ATF DEXRON II 64742-65-0
SUPP DATA 7727-37-9
CITRIC ACID 77-92-9
ARMOR 22 FLOOR FINISH & SEAL, 10-100 111-77-3
34590-94-8
84-74-2
POST SEALING TREATMENT 9036-19-5
DESALTER KIT,SEA WATER,MARK 2,TYPE 2
CS 85 CLEANING SOLUTION/CLEANING SOLUTION ( 76-13-1
67-63-0
BORON MONOFILAMENT 7439-97-6
ALUMINUM BRONZE, 533-NI AL BRZ-C95800 7429-90-5
7440-50-8
7439-89-6
7440-02-0
SODIUM METABISULFITE, 97+%, A.C.S. REAGENT, 7681-57-4
SUPERLIFE-316, 10-0747-04 1317-65-3
12001-26-2
SHARPIE FINE POINT PERMANENT MARKER, RED 109125-50-0
71-23-8
71-36-3
123-42-2
(12A3) FLUORESCENT GLO AEROSOL RED, 180 64742-89-8
108-88-3
110-54-3
74-98-6
75-28-5
106-97-8
PHOSPHATE STANDARD, 45PPM, 264
CHELANT BUFFER REAGENT, 615 12179-04-3
10043-35-3
1 SHOT GRAPHIC COAT BULLETIN COLORS, 4001 64742-95-6
108-67-8
64475-85-0
95-63-6
64742-89-8
68037-38-7
1333-86-4
7439-92-1
CHEMGRIP TREATING AGENT 7440-23-5
91-20-3
111-96-6
THERMOBOND T-723 TUBE, 80-723 67-64-1
67-56-1
108-88-3
PLASTO BOND SUPER (WET) 1344-28-1
1310-73-2
1310-58-3
13463-67-7
65996-74-9
LEAD BETA-RESORCYLATE 41453-50-3
INTERSHEEN FINISH WHITE, LAB000 1330-20-7
64742-95-6
IRON-CRETE, 4032 112-57-2
1675-54-3
111-40-0
112-24-3
ACCEL AEROSOL, 5054 76-13-1
ENHANCE 4-1GL 64742-48-9
INDIGO CARMINE, CERTIFIED, 13116-4 860-22-0
INDIUM, SHOT, C.A. 3MM DIAM., 99.9+%, 32660 7440-74-6
POTASSIUM PYROSULFATE, 99%, 30775-0 7790-62-7
PHOSPHORUS OXYCHLORIDE, 99%, 20117-0 10025-87-3
PHOSPHOMOLYBDIC ACID HYDRATE, A.C.S. REAGENT, 22185-6 51429-74-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com