| MSDS | : | 831K050 H.S 420 FED 37925 FLAT WHITE | | CAS | : | 110-43-0
85959-88-2
123-86-4
13463-67-7
108-10-1
9011-05-6 | | NAME | : | 2-heptanone, methyl n-amyl ketone
1,3-benzenedicarboxylic acid polymer (polyester resin)
butyl acetate (n-butyl acetate)
additives
resin
pigment
titanium dioxide, tio2
hexone, methyl isobutyl ketone (mibk), 4-methyl-2-pentanone
urea, polymer w/formaldehyde; fomaldehyde-urea resin; k 17;
weight per gallon in pounds: 10.15 lbs
vol organic cmpd: 420 g/l (mixed w/910x960 @ 2/1)
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:831K050 H.S 420 FED 37925 FLAT WHITE
NIIN:00F030821
MSDS Number: BSLXW
=== Responsible Party ===
Company:DESOTO AEROSPACE COATINGS, INC
Address:1608 4TH STREET
City:BERKELEY
State:CA
ZIP:94710
Country:US
Info Phone Num:818-549-7823 / 415-526-1525
Emergency Phone Num:800-228-5635 / 800-424-9300
CAGE:DESOT
=== Contractor Identification ===
Company:DESOTO AEROSPACE COATINGS, INC
Address:1608 FOURTH STREET
City:BERKELEY
State:CA
ZIP:94710
Country:US
Phone:818-549-7822
CAGE:DESOT
Company:DESOTO INC PACIFIC PLANT IS COURTLANDTS AEROSPACE
Address:1608 4TH ST
Box:City:BERKELEY
State:CA
ZIP:94710
Country:US
Phone:800-228-5635 /800-424-9300 CHEMTREC
CAGE:85570
============= Composition/Information on Ingredients =============
Name:2-HEPTANONE, METHYL N-AMYL KETONE
CAS:110-43-0
RTECS #:MJ5075000
Fraction by Wt: 15%
Other REC Limits:50 PPM
OSHA PEL:465 MG/CUM
ACGIH TLV:233 MG/CUM
Name:1,3-BENZENEDICARBOXYLIC ACID POLYMER (POLYESTER RESIN)
*93-3*
CAS:85959-88-2
Fraction by Wt: <5%
Name:BUTYL ACETATE (N-BUTYL ACETATE)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: <5%
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ADDITIVES
Fraction by Wt: <20%
Name:RESIN
Fraction by Wt: <20%
Other REC Limits:10 MG/CUM (DUST)
Name:PIGMENT
Fraction by Wt: <20%
Other REC Limits:10 MG/CUM (DUST)
Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 25%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)
Name:HEXONE, METHYL ISOBUTYL KETONE (MIBK), 4-METHYL-2-PENTANONE
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 15%
Other REC Limits:50 PPM
OSHA PEL:410 MG/CUM
ACGIH TLV:205 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:UREA, POLYMER W/FORMALDEHYDE; FOMALDEHYDE-UREA RESIN; K 17;
K385; KARBAMOL; K 8870
CAS:9011-05-6
RTECS #:YU1610000
Fraction by Wt: 10%
Name:WEIGHT PER GALLON IN POUNDS: 10.15 LBS
RTECS #:9999999WG
Name:VOL ORGANIC CMPD: 420 G/L (MIXED W/910X960 @ 2/1)
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NASAL & RESPIRATORY
IRRITATION, CENTRAL NERVOUS SYSTEM DEPRESSION, ASPHYXIATION, BRAIN
& NERVOUS SYSTEM DAMAGE. EYES: IRRITATION. INGESTION:
GASTROINTESTINAL IRRITATION. SKIN: IRRITATION, DERMATITIS,
DEFATTING. OVEREXPOSURE TO SOLVENTS CAUSES PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, STAGGERING
GAIT, CONFUSION OR UNCONSCIOUSNESS. OVEREXPOSURE TO SOLVENTS CAUSES
CONCENTRATION DIFFICULTIES, DIMINISHED ACTUAL DEXTERITY & MEMORY
LOSS. INGESITON: NAUSEA , VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, LUNG & EYE
CONDITIONS.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINUTES. SKIN: WASH AFFECTED AREAS
W/SOAP & WATER. DON'T USE SOLVENTS. REMOVE CONTAMINATED CLOTHING.
INGESTION: GET MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR.
GIVE ARTIFICIAL RESPIRATION OR CARDIOPULMONARY RESUSCITATION (CPR)
IF REQUIRED, GIVE OXYGEN IF DIFFICULTY BREATHING. KEEP WARM/QUIET.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:60F
Lower Limits:1.11%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WATER SPRAY INEFFECTIVE. COOL FIRE EXPOSED
CONTAINERS W/WATER. FOG NOZZLES PREFERRED. WEAR NIOSH/MSHA APPROVED
SCBA & PROTECTIVE CLOTHING TO PREVENT CONTACT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO HEAT. VAPORS FORM EXPLOSIVE MIXTURES W/AIR. VAPORS
TRAVEL LOND DISTANCES. FLASHBACK/FLAME MAY OCCUR.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE IGNITION SOURCES. WEAR PROTECTIVE
EQUIPMENT. USE NON-SPARKING TOOLS, USE EMERGENCY RESPONSE
PROFESSIONAL IF MANAGING A RELEASE IS BEYOND THE CAPABILITY OF IN
HOUSE PERSONNEL. FOR SMALL SPILLS, DIKE & ABSORB W/INERT MATERIAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. AVOID
IGNITION SOURCES. DON'T STORE >120F. STORE IAW/NATIONAL FIRE
PROTECTION ASSOCIATION. AVOID FREE FALL OF LIQUID.
Other Precautions:DON'T SMOKE WHERE MATERIAL IS USED/STORED.
GROUNDING/BONDING PROCEDURES SHOULD BE FOLLOWED WHEN TRANSFERRING
MATERIAL. EMPTY DRUMS CONTAIN EXPLOSIVE VAPORS. DON'T
CUT/PUNCTURE/WELD NEAR DRUM. DON'T TA KE INTERNALLY. DON'T INHALE
VAPORS. SUPP
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AREAS WHERE TLV'S ARE EXCEEDED/SPRAY MIST
PRESENT USE NOISH/MSHA APPROVED RESPIRATOR. IN CONFINED AREAS USE
NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATORS.
Ventilation:LOCAL EXHAUST/GENERAL DILUTION IN VOLUMES & PATTERNS TO
KEEP LEVELS BELOW RECOMMENDED LIMIT
Protective Gloves:CHEMICALLY RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING, SAFETY SHOWER, EYE BATH
& WASHING FACILITIES
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
LIQUID DENSITY: HEAVIER THAN WATER. PRECAUTIONS CON'D: PREVENT
PROLONGED CONTACT W/CONTAMINATED CLOTHING. DON'T ENTER AREAS W/OUT
FOLLOWING PROCEDURES, INCLUDING AIR MONITORING, USE OF SUPPLIED
AIR, I F NEEDED/PRESENCE OF AN OBSERVER FOR ASSITANCE.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:241-300F
Vapor Density:>1
Spec Gravity:1.22
Evaporation Rate & Reference:(BU AC = 1): <1
Appearance and Odor:LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:57
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:IGNITION SOURCES, TEMPERATURES >120F, HOT
SURFACES
Hazardous Decomposition Products:CO, CO2
==================== Disposal Considerations ====================
Waste Disposal Methods:ENSURE THAT MATERIAL IS PACKAGED, STORED
TRANSPORTED/OTHERWISE MANAGED IAW/FEDERAL, STATE & LOCAL
REGULATIONS. NO DISPOSAL METHOD IS USED THAT WOULD POSE AN
ENVIRONMENTAL/HUMAN HEALTH HAZARD THREAT. D ON'T CONTAMINATED
GROUND/SURFACE WATER.UN1263.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|