Spill Release Procedures:PRODUCT MAY BE SWEPT OR SHOVELED IN TO A WASTE
CONTAINER. ADD SAND TO FACILITATE. PLACE IN METAL/PLASTIC CONTAINER
& ALLOW TO SET FOR 2 HOURS. HEAT IS GENERATED BY CURING PROCESS &
MATERIAL SHOULD BE ALLOWED TO COOL TO ROOM TEMPERATURE.
====================== Handling and Storage ======================
Handling and Storage Precautions:MATERIAL WILL SOLID WITHIN 2 HOURS.
Protective Gloves:RECOMMENED
Eye Protection:RECOMMENED
Other Protective Equipment:RECOMMENED
Work Hygienic Practices:WASH W/SOAP & WATER PRIOR TO CURE. WEAR OLD
CLOTHES. MATERIAL, WHEN CURED, IS DIFFICULT TO REMOVE FROM BODY
HAIR.
Supplemental Safety and Health
Waste Disposal Methods:SEAL CONTAINER & DISPOSE IN DIPOSAL CONTAINER OR
LANDFILL IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.