===================== Product Identification =====================
MSDS NAME:GF-1230 SERIES FLUXES
NIIN:00N049201
MSDS Number: BTZDC
=== Responsible Party ===
Company:GARDINER METAL CO
Address:4820 SOUTH CAMPBELL AVE
City:CHICAGO
State:IL
ZIP:60632
Country:US
Info Phone Num:312-847-0100
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:73766
=== Contractor Identification ===
Company:GARDINER METAL CO
Address:4820 SOUTH CAMPBELL AVENUE
City:CHICAGO
State:IL
ZIP:60632
Country:US
Phone:312-847-0100, 800-424-9300
CAGE:73766
Company:GARDINER SOLDER COMPANY DIV GARDINER METAL CO
Address:4820 S CAMPBELL AVE
Box:City:CHICAGO
State:IL
ZIP:60632-1494
Country:US
Phone:312-847-0100 CHEMTREC AFTER HOURS
CAGE:84311
============= Composition/Information on Ingredients =============
Name:ROSIN ACID; (ROSIN)
CAS:8050-09-7
Fraction by Wt: 10-50%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ISOPROPYL ALCOHOL (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 38-69%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500 STEL
Name:ISOBUTYL ALCOHOL (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: 5-9%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:NAPTHA PETROLEUM, HEAVY ALKYLATE C9-C12; (MINERAL SPIRITS)
CAS:64741-65-7
Fraction by Wt: 7-12%
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC:CONTACT MAY CAUSE
IRRITATION. PROLONGED OR REPEATED CONTACT MAY CAUSE TISSUE DAMAGE.
HEALTH STUDIES HAVE SHOWN THAT POTENTIAL HEALTH RISKS MAY VARY BY
INDIVIDUAL. ALWAYS MINIMIZE EXPOS URE AS A PRECAUTION. SIGNS &
SYMPTOMS OF EXPOSURE:INHAL:HEADACHE, DIZZINESS, DIFFICULTY
BREATHING. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INGEST:NAUSEA, VOMITING. SKIN:REDNESS,
BURNING, RASH, DRYNESS. EYES:REDNESS, BURNING, TEARING, BLURRED
VISION.
Medical Cond Aggravated by Exposure:SKIN ALLERGIES AND RESPIRATORY/LUNG
CONDITIONS.
======================= First Aid Measures =======================
First Aid:SKIN:FLUSH WITH WATER IMMEDIATELY-WASH THOROUGHLY AND APPLY
LOTION. EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES - SEEK
MEDICAL ATTENTION. INGEST:DRINK LARGE AMOUNTS OF WATER - SEEK
MEDICAL ATTENTION . NEVER GIVE LIQUIDS TO AN UNCONSCIOUS PERSON.
INHAL:REMOVE TO FRESH AIR. SUPPORT RESPIRATION IF REQUIRED - SEEK
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:53.6F,12.0C
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID, WATER MAY SPREAD FLAME.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE ALL SOURCES OF FLAME OR IGNITION.
FLUSH INTO A CHEMICAL SEWER OR SOAK UP WITH A SUITABLE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONTACT AS MUCH AS POSSIBLE. NO
SMOKING. GROUND METALLIC CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR MASK FOR FUMES
OVER TLV, DURING SOLDERING.
Ventilation:LOCAL EXHAUST:PREFERRED. MECHANICAL:OK
Protective Gloves:PLASTIC/RUBBER DURING SOLDERING.
Eye Protection:ANSI APPROVED GOGG & FULL LGTH (SUPDAT)
Other Protective Equipment:AS REQUIRED TO MINIMIZE CONTACT.
Work Hygienic Practices:WASH AFTER USE. FOLLOW GOOD INDUSTRIAL HYGIENIC
PRACTICES.
Supplemental Safety and Health
SPEC GRAV:0.830-0.920 G/ML @ 23C (74F). EYE PROT: FACESHIELD WHILE
SOLDERING .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:181F,83C
Melt/Freeze Pt:M.P/F.P Text:-127F,-88C
Vapor Pres:33
Vapor Density:2.7
Spec Gravity:SUPDAT
Evaporation Rate & Reference:1.7 (BUTYL ACETATE =1 )
Solubility in Water:APPROX. 65%
Appearance and Odor:AMBER LIQUID, ALCOHOL ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:(INCOMPLETE BURNING) CO, CO*2,
HYDROCARBONS
==================== Disposal Considerations ====================
Waste Disposal Methods:RECLAMATION OR INCINERATION SUGGESTED. ALWAYS
DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL
REGUALTIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|