===================== Product Identification =====================
MSDS NAME:PCB RISC WIPE TEST KIT, METHANOL
NIIN:00N049982
Kit Part:Y
MSDS Number: BVJFB
=== Responsible Party ===
Company:RADIAN CORP
Address:8501 NORTH MOPAC BLVD
City:201088
State:TX
ZIP:78720-1088
Country:US
Info Phone Num:512-545-4797
Emergency Phone Num:512-454-4797
CAGE:IO771
=== Contractor Identification ===
Company:ENSYS INC
Box:14063
City:RESEARCH TRIANGLE PARK
State:NC
ZIP:27709
Country:US
Phone:800-242-7472
CAGE:ENSYS
Company:RADIAN CORP
Address:8501 NORTH MOPAC BLVD
Box:City:201088
State:TX
ZIP:78720-1088
Country:US
Phone:512-545-4797
CAGE:IO771
============= Composition/Information on Ingredients =============
Name:METHYL ALCOHOL; (METHANOL) (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 100%
OSHA PEL:200 PPM;250 STEL, S
ACGIH TLV:200 PPM;250 STEL, S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE TO METHANOL MAY RESULT IN
SEVERE SKIN AND EYE IRRITATION, BLINDNESS AND NARCOSIS. IT CAN BE
ABSORBED THROUGH THE SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EXPOSURE TO METHANOL MAY CAUSE BURNING
SENSATION, COUGHING, WHEEZING, LARYNGITIS, SHORTNESS OF BREATH,
HEADACHE, NAUSEA, VOMITING, EYE DAMAGE, CONVULSIONS, FATIGUE,
DROWSINESS, AND CNS DEPRESSION.
======================= First Aid Measures =======================
First Aid:INGEST: GIVE VICTIM LARGE QUANTITIES OF LIQUID AND TRANSPORT
TO A MEDICAL FACILITY. SKIN: WASH AFFECTED AREAS WITH LARGE AMOUNTS
OF WATER AND TRANSPORT TO A MEDICAL FACILITY. INHAL: GIVE ARTF RESP
WHI LE TRANSPORTING TO A MEDICAL FACILITY. EYE: IMMEDIATELY FLUSH
WITH POTABLE WATER FOR A MINIMUM OF 15 MIN. SEEK ASSISTANCE FROM MD
.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:52.0F,11.1C
Lower Limits:6%
Upper Limits:36.5%
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE OR HALON EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FLASHBACK ALONG VAPOR TRAIL MAY OCCUR.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. USE ABSORBENT
PAPER TO PICK UP ALL SPILLED MATERIAL. IF NECESSARY, SOAK ABSORBENT
PAPER IN AN APPROPRIATE SOLVENT SUCH AS TOLUENE OR ALCOHOL TO PICK
UP REMAINING TRACES .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT 0C. PROTECT FROM LIGHT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AVOID INHALATION OF VAPORS. NIOSH/MSHA APPROVED
CARTRIDGE TYPE RESPIRATOR WITH ORGANIC VAPOR CARTRIDGES
RECOMMENDED.
Ventilation:LOCAL EXHAUST: USE WITH FORCED VENTILATION. GENERAL: NORMAL
LABORATORY AIR EXCHANGE.
Protective Gloves:PVC OR NEOPRENE OVER LATEX.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Work Hygienic Practices:ONLY EXPERIENCED PERSONNEL SHOULD BE ALLOWED TO
HANDLE THIS MATERIAL.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:148F,64C
Melt/Freeze Pt:M.P/F.P Text:-144F,-98C
Vapor Pres:97 @ 20C
Vapor Density:1.11
Spec Gravity:0.7913
Evaporation Rate & Reference:5.9 (BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID, SLIGHT ALCOHOLIC ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ACIDS, ACID CHLORIDES, ACID ANHYDRIDES, OXIDIZING AGENTS, REDUCING
AGENTS, AND ALKALI METALS.
Stability Condition to Avoid:HEAT, SPARKS OR OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:TOXIC FUMES OF CARBON MONOXIDE AND
CARBON DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MATERIALS SHOULD BE DISPOSED OF UNDER
CONDITIONS WHICH MEET FEDERAL, STATE AND LOCAL ENVIRONMENTAL
CONTROL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SLM-AC SILVERMASTER ACTIVATOR, 4X1 GAL 60-18608-002
| 1310-58-3
111-41-1
1310-73-2 |
|
SILVALOY 1
| 7440-50-8
7440-22-4
7723-14-0 |
|
SILVALOY 2
| 7440-50-8
7440-22-4
7723-14-0 |
|
SILVALOY 5
| |
|
SILVALOY 30
| |
|
SILVALOY A-25T
| |
|
SILVALOY A-35
| |
|
AMSCRUB
| 1336-21-6
8002-09-3
14808-60-7
111-42-2
7758-29-4 |
|
DOUBLE BOILED LINSEED OIL, 14-492
| 67746-08-1 |
|
CERTIFIED ALCOHOL REFERENCE SOLUTION, PM-0XXX-XX
| 64-17-5 |
|
IMS 303
| 7664-38-2 |
|
PINE ALPHA ST-100S
| 7732-18-5 |
|
TRAPAEOLIN-O
| 547-57-9 |
|
XS-3206N
| 142-82-5 |
|
VINYL ACETATE RESIN
| 25609-89-6 |
|
MUZININ 212 B COMPRESSED WATER ADDITIVE CONCENTRATE
| |
|
FUSING OIL, RP509
| 63148-62-9 |
|
ANTISEPTIC HANDSPRAY STERIDERM
| 67-64-1
56-81-5
64-17-5 |
|
SOLID STRIP
| 80-62-6 |
|
CHEWING GUM REMOVER, 835
| 75-45-6
75-28-5 |
|
TE-80 POWDER
| 14808-60-7 |
|
TE-80 PASTE
| |
|
POLY-N
| |
|
BLUE ENDORSER
| |
|
TRANSPARENT STAIN
| 111-76-2
84-74-2
108-01-0 |
|
LASER TYPE TONER CX/SX/PC
| 1317-61-9
7440-38-2
7440-43-9
7439-92-1
7440-47-3
1333-86-4 |
|
ANTISTAT/CRT SOLUTION
| 68122-86-1
67-63-0
107-98-2
34590-94-8
7732-18-5 |
|
APC-3
| 67-63-0
34590-94-8 |
|
PERMA CEMENT
| 65997-15-1
14808-60-7 |
|
INSECT FOGGER
| 8002-05-9
71-55-6
75-28-5
74-98-6
584-79-2
26002-80-2 |
|
SURFACE MOUNT SOLDER CREAM, 6-SN10
| 7440-31-5
7439-92-1
7440-22-4 |
|
PCB RISC WIPE TEST KIT, POLYCHLORINATED (SUPP DATA)
| 11097-69-1
67-56-1 |
|
PCB RISC WIPE TEST KIT, METHANOL
| 67-56-1 |
|
PCB RISC WIPE TEST KIT, SUBSTRATE
| 68-12-2 |
|
PCB RISC WIPE TEST KIT, STOP SOLUTION
| 7664-93-9 |
|
EXT P.V.A WHITE L-2288A, 50-00
| 107-21-1 |
|
VINYLITE V.A.L 65-00 WHITE
| 107-21-1 |
|
P.V.A PRIMER & SEALER, L-1985
| 107-21-1 |
|
USC PINE SHINE DIS, 6X1CS
| 8002-09-3
68122-86-1 |
|
PREM QUALITY 6017 REGAL GOLD, 0795
| 64742-89-8
108-88-3
64742-89-8
74-98-6
75-28-5
67-64-1 |
|
WASP & HORNET SPRAY
| 463-04-7
71-55-6
124-38-9
8052-41-3
67-63-0
114-26-1
8003-34-7
51-03-6 |
|
SCA ADHESIVE ACTIVATOR, 4000-12
| 75-45-6
613-48-9
123-31-9 |
|
CONLEY WELD-C1
| 25068-38-6
112945-52-5
1332-58-7
13463-67-7 |
|
MAT12370
| 7439-90-9 |
|
ASPHALT EMULSION PRODUCT TYPE SS-1H
| 8052-42-4
7732-18-5 |
|
NELCO CEMENT-CROWN WATERPROOF BELT CEMENT, CL 163
| 67-64-1
84-74-2
9004-70-0
67-63-0 |
|
NO ISSUE
| 34590-94-8
6834-92-0 |
|
CONTECH CERAMIC TILE ADHESIVE, 88-206
| 1332-58-7
107-21-1
67-56-1
8052-41-3 |
|
SOAP BASED-WIRE PULLING LUBRICANT
| |
|
SUPREME MOTOR OIL SAE 10W-30, CPS220019
| 64741-88-4
64741-89-5
64741-96-4
64741-97-5
64742-01-4
64742-52-5
64742-53-6
64742-54-7
64742-62-7
64742-65-0
72623-83-7 |
|
|