===================== Product Identification =====================
MSDS NAME:POLY-N
NIIN:00N049960
MSDS Number: BVJDL
=== Responsible Party ===
Company:COUSINS AG PRODUCT INC
Address:716 DRAYTON ST
Box:1002
City:NEWBERRY
State:SC
ZIP:29108
Country:US
Info Phone Num:803-276-1522
Emergency Phone Num:803-276-1522;800-424-9300(CHEMTREC)
CAGE:CUSNS
=== Contractor Identification ===
Company:COUSINS AG PRODUCT INC
Address:716 DRAYTON ST
Box:1002
City:NEWBERRY
State:SC
ZIP:29108
Country:US
Phone:803-276-1522;800-424-9300(CHEMTREC)
CAGE:CUSNS
============= Composition/Information on Ingredients =============
Name:AMMONIUM POLYPHOSPHATE; (AMMONIUM POLYPHOSPHATE SOLUTION,
MFR CAS NO: 68333-79-9)
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50: (ORAL,RAT) 5,000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: IF MISTY CONDITION PREVAILS,
MAY IRRIT. INGEST: LARGE DOES OF AMMONIUM SALT MAY GIVE DIARRHEA
AND DIURESIS. LOW ORAL TOXICITY. SKIN: LOW SKIN IRRITATION
POTENTIAL. EYE: LOW EYE IRRITATION POTEN TIAL.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH IMMED & THORO W/WATER FOR @ LST 15 MIN. IF IRRIT
PERSISTS, GET PROMPT MED ATTN. SKIN: FLUSH IMMED & THORO W/WATER.
IF IRRIT PERSISTS, GET PROMPT MEDICAL ATTENTION. INHAL: GENERALLY
NOT CONSI DERED AN INHAL HAZ. REMOVE TO FRESH AIR. SUPPORT BRTHG
(GIVE O*2/ARTF RESP). INGEST: IF CONSCIOUS, IMMED GIVE LRG QTYS OF
WATER & INDUCE VOMIT. CONSULT PHYSICIAN PROMPTLY.
===================== Fire Fighting Measures =====================
Extinguishing Media:POLY-N SOLN IS ESSENTIALLY NONFLAMM, & AMMONIUM
POLYPHOSPHATE IS USED COMMERCIALLY AS A FIRE RETARDANT. (SUPP DATA)
Fire Fighting Procedures:DUE TO POSSIBLE EVOLUTION OF AMMONIA, WEAR
NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP . USE WATER SPRAY TO
KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:WHEN HEATED, IT MAY GIVE OFF AMMONIA
FUMES. (THIS MATERIAL IS A FIRE RETARDANT.)
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL AND MAXIMIZE RECOVERY. MOP UP OR
PUMP UP PROMPTLY INTO METAL OR PLASTIC DRUM. (CAUTION SHOULD BE
EXERCISED IN THE AREA OF SPILLED MATERIAL SINCE POLY-N SOLUTION CAN
CAUSE SLIPPERY CONDIT ION.)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID BREATHING MIST, IF ANY SHOULD BE
FORMED. MINIMIZE CONTACT OF LIQUID WITH EYE, SKIN AND CLOTHING. USE
GOOD PERSONAL HYGIENE AND HOUSEKEEPING.
Other Precautions:AVOID DUSTING CONTAINERS, PIPES AND FITTINGS MADE OF
ZINC-CLAD OR COPPER-BEARING ALLOYS. STORAGE IN OPEN CONTAINERS MAY
RESULT IN FORMATION OF AN AMMONIUM POLYPHOSPHATE SOLID ON WALLS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESPS ARE NOT REQUIRED UNDER NORMALLY VENT
CONDITIONS. IF HEATED TO EVOLVE AMMONIA, USE APPROP PROT. IF MISTED
BY HEAT, AGITATION, OR SPRAY, USE NIOSH/MSHA APPROVED MIST RESP. DO
NOT USE SINGLE-USE TY PE.
Ventilation:UNLESS HEATED TO EVOLVE AMMONIA OR MISTED BY HEAT,
AGITATION, OR SPRAYING, NATURAL VENT SHOULD BE ADEQUATE.
Protective Gloves:RUBBER-COATED GLOVES.
Eye Protection:SAFETY GLASSES ARE RECOMMENDED.
Other Protective Equipment:RUBBER COATED CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 5.7-6.2. EXTING MEDIA: IF INVOLVED IN A FIRE, USE WATER. ALL
STANDARD AGENTS ARE ACCEPTABLE (WATER, DRY CHEMICAL, CARBON
DIOXIDE, HALON AND FOAM).
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:221F,105C
Vapor Pres:< 1 @37.8C
Spec Gravity:1.388
pH:SUPDAT
Solubility in Water:100%
Appearance and Odor:GREEN ODORLESS LIQUID.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ZINC-CLAD AND COPPER-BEARING ALLOYS. WATER-REACTIVE MATERIALS.
Stability Condition to Avoid:WHEN HEATED, FOR EXAMPLE IN A FIRE, GIVES
OFF AMMONIA GAS.
Hazardous Decomposition Products:AMMONIA.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISP OF POLY-N FERTILIZER MAY BE SUBJECT TO FED,
STATE & LOCAL REGS. USERS OF THIS PROD SHOULD REVIEW THEIR
OPERATIONS IN TERMS OF APPLICABLE FED, STATE & LOC LAWS & REGS,
THEN CONSULT W/APPROP REG AG ENCIES BEFORE DISCHARGING OR DISP OF
WASTE MATL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SLM-AC SILVERMASTER ACTIVATOR, 4X1 GAL 60-18608-002
| 1310-58-3
111-41-1
1310-73-2 |
|
SILVALOY 1
| 7440-50-8
7440-22-4
7723-14-0 |
|
SILVALOY 2
| 7440-50-8
7440-22-4
7723-14-0 |
|
SILVALOY 5
| |
|
SILVALOY 30
| |
|
SILVALOY A-25T
| |
|
SILVALOY A-35
| |
|
AMSCRUB
| 1336-21-6
8002-09-3
14808-60-7
111-42-2
7758-29-4 |
|
DOUBLE BOILED LINSEED OIL, 14-492
| 67746-08-1 |
|
CERTIFIED ALCOHOL REFERENCE SOLUTION, PM-0XXX-XX
| 64-17-5 |
|
IMS 303
| 7664-38-2 |
|
PINE ALPHA ST-100S
| 7732-18-5 |
|
TRAPAEOLIN-O
| 547-57-9 |
|
XS-3206N
| 142-82-5 |
|
VINYL ACETATE RESIN
| 25609-89-6 |
|
MUZININ 212 B COMPRESSED WATER ADDITIVE CONCENTRATE
| |
|
FUSING OIL, RP509
| 63148-62-9 |
|
ANTISEPTIC HANDSPRAY STERIDERM
| 67-64-1
56-81-5
64-17-5 |
|
SOLID STRIP
| 80-62-6 |
|
CHEWING GUM REMOVER, 835
| 75-45-6
75-28-5 |
|
TE-80 POWDER
| 14808-60-7 |
|
TE-80 PASTE
| |
|
POLY-N
| |
|
BLUE ENDORSER
| |
|
TRANSPARENT STAIN
| 111-76-2
84-74-2
108-01-0 |
|
LASER TYPE TONER CX/SX/PC
| 1317-61-9
7440-38-2
7440-43-9
7439-92-1
7440-47-3
1333-86-4 |
|
ANTISTAT/CRT SOLUTION
| 68122-86-1
67-63-0
107-98-2
34590-94-8
7732-18-5 |
|
APC-3
| 67-63-0
34590-94-8 |
|
PERMA CEMENT
| 65997-15-1
14808-60-7 |
|
INSECT FOGGER
| 8002-05-9
71-55-6
75-28-5
74-98-6
584-79-2
26002-80-2 |
|
SURFACE MOUNT SOLDER CREAM, 6-SN10
| 7440-31-5
7439-92-1
7440-22-4 |
|
PCB RISC WIPE TEST KIT, POLYCHLORINATED (SUPP DATA)
| 11097-69-1
67-56-1 |
|
PCB RISC WIPE TEST KIT, METHANOL
| 67-56-1 |
|
PCB RISC WIPE TEST KIT, SUBSTRATE
| 68-12-2 |
|
PCB RISC WIPE TEST KIT, STOP SOLUTION
| 7664-93-9 |
|
EXT P.V.A WHITE L-2288A, 50-00
| 107-21-1 |
|
VINYLITE V.A.L 65-00 WHITE
| 107-21-1 |
|
P.V.A PRIMER & SEALER, L-1985
| 107-21-1 |
|
USC PINE SHINE DIS, 6X1CS
| 8002-09-3
68122-86-1 |
|
PREM QUALITY 6017 REGAL GOLD, 0795
| 64742-89-8
108-88-3
64742-89-8
74-98-6
75-28-5
67-64-1 |
|
WASP & HORNET SPRAY
| 463-04-7
71-55-6
124-38-9
8052-41-3
67-63-0
114-26-1
8003-34-7
51-03-6 |
|
SCA ADHESIVE ACTIVATOR, 4000-12
| 75-45-6
613-48-9
123-31-9 |
|
CONLEY WELD-C1
| 25068-38-6
112945-52-5
1332-58-7
13463-67-7 |
|
MAT12370
| 7439-90-9 |
|
ASPHALT EMULSION PRODUCT TYPE SS-1H
| 8052-42-4
7732-18-5 |
|
NELCO CEMENT-CROWN WATERPROOF BELT CEMENT, CL 163
| 67-64-1
84-74-2
9004-70-0
67-63-0 |
|
NO ISSUE
| 34590-94-8
6834-92-0 |
|
CONTECH CERAMIC TILE ADHESIVE, 88-206
| 1332-58-7
107-21-1
67-56-1
8052-41-3 |
|
SOAP BASED-WIRE PULLING LUBRICANT
| |
|
SUPREME MOTOR OIL SAE 10W-30, CPS220019
| 64741-88-4
64741-89-5
64741-96-4
64741-97-5
64742-01-4
64742-52-5
64742-53-6
64742-54-7
64742-62-7
64742-65-0
72623-83-7 |
|
|