Search   
MSDS  : SURFACE MOUNT SOLDER CREAM, 6-SN10
CAS  : 7440-31-5
7439-92-1
7440-22-4
NAME  : tin
lead
silver
===================== Product Identification =====================

MSDS NAME:SURFACE MOUNT SOLDER CREAM, 6-SN10
NIIN:00N049981
MSDS Number: BVJDY
=== Responsible Party ===
Company:EFD INC
Address:977 WATERMAN AVE
City:EAST PROVIDENCE
State:RI
ZIP:02914
Country:US
Info Phone Num:800-338-4353
Emergency Phone Num:800-338-4353
CAGE:EFDIN
=== Contractor Identification ===
Company:EFD INC
Address:977 WATERMAN AVE
Box:City:EAST PROVIDENCE
State:RI
ZIP:02914
Country:US
Phone:800-338-4353
CAGE:EFDIN

============= Composition/Information on Ingredients =============

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

Name:LEAD
CAS:7439-92-1
RTECS #:OF7525000
OSHA PEL:0.05 MG/M3
ACGIH TLV:0.15 MG/M3 DUST
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:SILVER
CAS:7440-22-4
RTECS #:VW3500000
Other REC Limits:STRONG OXIDIZING AGN
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: INGEST IS TOX & WILL
PRDCE POISONING. VICTIM SHOULD BE TAKEN TO DR FOR TEMP LEVEL
EVAULATION & NEUROLOGICAL SYMPS. BRTHG OF VAPS AT MELTING TEMP CAN
CAUSE NAUS, HDCH, JOINT & MUSCLE PAI N. SIGNS/SYMPS: MILD IRRIT TO
SKIN WHICH MAY CAUSE DERM. CONT W/EYES WILL CAUSE IRRIT. SYMPS FROM
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INHAL & INGEST ARE NAUS, HDCH, &
JOINT & MUSCLE PAIN. NOTE: LEAD APPEARS ON NAVY LIST OF OCCUP CHEM
REPROD HAZ. SEEK CONSULTATION FROM APPROP HLTH PROFESSIONALS
CONCERNING LATEST HAZ LIST IN FO & SAFE HNDLG & EXPOSURE
INFORMATION .

======================= First Aid Measures =======================

First Aid:INHAL: MOVE TO FRESH AIR. EYES: REMOVE CONTACT LENSES. FLUSH
WITH WARM WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP AND
WATER. INGEST: CALL A MD.

===================== Fire Fighting Measures =====================

Flash Point Method:COC
Flash Point:>266F,>130C
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FLUX IN PASTE SOLDER MAY BURN IF
SOLDERING IS DONE W/A FLAME.

================== Accidental Release Measures ==================

Spill Release Procedures:SWEEP INTO LABELED WASTE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:AVOID STORAGE NEAR/CONT W/HEAT AND
OPEN FLAMES.
Other Precautions:STORE IN A DRY AREA.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NOT REQUIRED UNLESS WORKING IN CLOSED AREA. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECH(GEN): SATISFACTORY.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Work Hygienic Practices:TO REMOVE LEAD: WASH HANDS THORO WITH SOAP AND
WATER BEFORE EATING/DRINKING/SMOKING. DO NOT SMOKE WHILE SOLDERING.
Supplemental Safety and Health
BP: >4010F,>2210C.

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:SUPP DATA
Melt/Freeze Pt:M.P/F.P Text:>450F,>232C
Solubility in Water:NOT SOLUBLE
Appearance and Odor:GREY CREAM, MILD SOLVENT ODOR

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Hazardous Decomposition Products:NONE.

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSE OF ACCORDING TO ALL FEDERAL, STATE AND
LOCAL REGULATIONS. SOLDER CAN BE SOLD TO A METALS RECLAIMER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SLM-AC SILVERMASTER ACTIVATOR, 4X1 GAL 60-18608-002 1310-58-3
111-41-1
1310-73-2
SILVALOY 1 7440-50-8
7440-22-4
7723-14-0
SILVALOY 2 7440-50-8
7440-22-4
7723-14-0
SILVALOY 5
SILVALOY 30
SILVALOY A-25T
SILVALOY A-35
AMSCRUB 1336-21-6
8002-09-3
14808-60-7
111-42-2
7758-29-4
DOUBLE BOILED LINSEED OIL, 14-492 67746-08-1
CERTIFIED ALCOHOL REFERENCE SOLUTION, PM-0XXX-XX 64-17-5
IMS 303 7664-38-2
PINE ALPHA ST-100S 7732-18-5
TRAPAEOLIN-O 547-57-9
XS-3206N 142-82-5
VINYL ACETATE RESIN 25609-89-6
MUZININ 212 B COMPRESSED WATER ADDITIVE CONCENTRATE
FUSING OIL, RP509 63148-62-9
ANTISEPTIC HANDSPRAY STERIDERM 67-64-1
56-81-5
64-17-5
SOLID STRIP 80-62-6
CHEWING GUM REMOVER, 835 75-45-6
75-28-5
TE-80 POWDER 14808-60-7
TE-80 PASTE
POLY-N
BLUE ENDORSER
TRANSPARENT STAIN 111-76-2
84-74-2
108-01-0
LASER TYPE TONER CX/SX/PC 1317-61-9
7440-38-2
7440-43-9
7439-92-1
7440-47-3
1333-86-4
ANTISTAT/CRT SOLUTION 68122-86-1
67-63-0
107-98-2
34590-94-8
7732-18-5
APC-3 67-63-0
34590-94-8
PERMA CEMENT 65997-15-1
14808-60-7
INSECT FOGGER 8002-05-9
71-55-6
75-28-5
74-98-6
584-79-2
26002-80-2
SURFACE MOUNT SOLDER CREAM, 6-SN10 7440-31-5
7439-92-1
7440-22-4
PCB RISC WIPE TEST KIT, POLYCHLORINATED (SUPP DATA) 11097-69-1
67-56-1
PCB RISC WIPE TEST KIT, METHANOL 67-56-1
PCB RISC WIPE TEST KIT, SUBSTRATE 68-12-2
PCB RISC WIPE TEST KIT, STOP SOLUTION 7664-93-9
EXT P.V.A WHITE L-2288A, 50-00 107-21-1
VINYLITE V.A.L 65-00 WHITE 107-21-1
P.V.A PRIMER & SEALER, L-1985 107-21-1
USC PINE SHINE DIS, 6X1CS 8002-09-3
68122-86-1
PREM QUALITY 6017 REGAL GOLD, 0795 64742-89-8
108-88-3
64742-89-8
74-98-6
75-28-5
67-64-1
WASP & HORNET SPRAY 463-04-7
71-55-6
124-38-9
8052-41-3
67-63-0
114-26-1
8003-34-7
51-03-6
SCA ADHESIVE ACTIVATOR, 4000-12 75-45-6
613-48-9
123-31-9
CONLEY WELD-C1 25068-38-6
112945-52-5
1332-58-7
13463-67-7
MAT12370 7439-90-9
ASPHALT EMULSION PRODUCT TYPE SS-1H 8052-42-4
7732-18-5
NELCO CEMENT-CROWN WATERPROOF BELT CEMENT, CL 163 67-64-1
84-74-2
9004-70-0
67-63-0
NO ISSUE 34590-94-8
6834-92-0
CONTECH CERAMIC TILE ADHESIVE, 88-206 1332-58-7
107-21-1
67-56-1
8052-41-3
SOAP BASED-WIRE PULLING LUBRICANT
SUPREME MOTOR OIL SAE 10W-30, CPS220019 64741-88-4
64741-89-5
64741-96-4
64741-97-5
64742-01-4
64742-52-5
64742-53-6
64742-54-7
64742-62-7
64742-65-0
72623-83-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net