vent: expos lim which may be listed. refer to indust vent-a ing 20: of governmental industrial hygienists. mineral spirits. vp: 2@20c. lel: 1%. uel: 7% titanium oxide; (titanium dioxide) barium sulfate stoddard solvent. lel: 0.8% volatile organic compounds: 3.89 lb/gal less water. 467 g/l volatile organic compounds. 9.73 lb/gal solids. 1168 g/l efts of overexp: ti*2 dust. norm clearance mechanisms of msds toxicity property">
ing 8:be directly relevant to workplace where occup expos ing 9: there is no significant hazard for man. first aid proc: any trtmt that might be reqd for overexp spill proc: use only non-sparking tools. place absorb ing 12:of sewers, streams, and groundwater w/spilled waste disp meth: prod, if discarded directly would be ing 14: i.e. has a fl pt of 140f(60c) or less. rcra# d001. resp prot: areas a niosh/msha apprvd chem cartridge resp ing 16: mech filter may also be reqd. in confined areas use ing 17:are exceeded use a properly fitted niosh/msha apprvd ing 18:29cfr1910,134 "resp prot" & "resp protection a vent: expos lim which may be listed. refer to indust vent-a ing 20: of governmental industrial hygienists. mineral spirits. vp: 2@20c. lel: 1%. uel: 7% titanium oxide; (titanium dioxide) barium sulfate stoddard solvent. lel: 0.8% volatile organic compounds: 3.89 lb/gal less water. 467 g/l volatile organic compounds. 9.73 lb/gal solids. 1168 g/l efts of overexp: ti*2 dust. norm clearance mechanisms of msds toxicity property">
MSDS
:
EFFECTO ENAMEL YELLOW BASE
CAS
:
64742-88-7 13463-67-7 7727-43-7 8052-41-3
NAME
:
ing 7: been overwhelmed @ 250mg/m3 expos level, & this may ing 8:be directly relevant to workplace where occup expos ing 9: there is no significant hazard for man. first aid proc: any trtmt that might be reqd for overexp spill proc: use only non-sparking tools. place absorb ing 12:of sewers, streams, and groundwater w/spilled waste disp meth: prod, if discarded directly would be ing 14: i.e. has a fl pt of 140f(60c) or less. rcra# d001. resp prot: areas a niosh/msha apprvd chem cartridge resp ing 16: mech filter may also be reqd. in confined areas use ing 17:are exceeded use a properly fitted niosh/msha apprvd ing 18:29cfr1910,134 "resp prot" & "resp protection a vent: expos lim which may be listed. refer to indust vent-a ing 20: of governmental industrial hygienists. mineral spirits. vp: 2@20c. lel: 1%. uel: 7% titanium oxide; (titanium dioxide) barium sulfate stoddard solvent. lel: 0.8% volatile organic compounds: 3.89 lb/gal less water. 467 g/l volatile organic compounds. 9.73 lb/gal solids. 1168 g/l efts of overexp: ti*2 dust. norm clearance mechanisms of
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: CAN CAUSE GI IRRIT,
NAUS, & VOMIT. ASPIR OF MATL INTO LUNGS MAY CAUSE CHEM PNEUM WHICH
CAN BE FATAL. INHAL: MAY CAUSE NOSE/THROAT IRRIT. HIGH CONC MAY
CAUSE ACUTE CNS DEPRESS CHARACT BY HDCH, DIZZ, NAUS & CONFUSN.
EYE: MAY CAUSE IRRIT. SKIN: MAY CAUSE DEFAT & IRRIT. CHRONIC:
REPORTS HAVE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: ASSOC PRLNGD & RPTD OCCUP OVEREXP TO
SOLV W/PERM BRAIN & NERV SYS DAM. INTENTIONAL MISUSE BY DELIB CONC
& INHALING CONTENTS MAY BE HARMFUL/FATAL. DRY TITANIUM DIOXIDE IN A
24-MTH INHAL STUDY W/RATS REVEALED A SIGNIFICANT INCR IN BENIGN &
MALIGNANT LUNG TUMORS IN GROUP EXPOSED TO 250MG/M3 RESPIRABLE (ING
7)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGEST: DO NOT INDUCE VOMIT. CALL POIS CTL CTR, HOSP EMER
ROOM/PHYS IMMED. INHAL: REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED,
GIVE ARTF RESP. KEEP WARM & QUIET. GET MED ATTN IMMED. EYE: FLUSH
W/LG AMTS OF WATER, LIFTING LIDS OCCAS. CONTINUEFOR @ LST 15 MIN.
GET MED ATTN. SKIN: REMOVE CONTAMD CLTHG. WASH AFFECTED AREA W/SOAP
& WATER. OBTAIN MED ATTN IF IRRIT PERSISTS. NOTES TO PHYS: (ING 11)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:106F,41C
Extinguishing Media:USE NFPA CLASS B FIRE EXTING (CARBON DIOXIDE, ALL
PURPOSE DRY CHEM/ALCOHOL FOAM) DESIGNED TO EXTING FLAMM LIQ
(SUPDAT)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER MAY BE INEFTIVE, BUT MAY BE USED TO COOL EXPOSED CONTRS TO
PVNT PRESS BUILD-UP & POSS AUTO-IGNIT/ (SUPDAT)
Unusual Fire/Explosion Hazard:DURING EMER CNDTNS, OVEREXP TO DECOMP
PROD MAY CAUSE A HLTH HAZ. SYMPS MAY NOT BE IMMED APPARENT. OBTAIN
MED ATTN. KEEP CONTRS TIGHTLY CLSD. ISOLATE (SUPDAT)
Spill Release Procedures:KEEP SPECTATORS AWAY. ELIM ALL IGNIT SOURCES
(FLAMES, HOT SURF, & SOURCES OF ELEC, STATIC/FRICTIONAL SPARKS).
DIKE & CNTN SPILL W/INERT MATL (E.G. SAND, EARTH). TRANSFER LIQ TO
COVERED METAL CONTRS FO R RECOVERY/DISP, OR REMOVE W/INERT
ABSORB.(ING 12)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 115F(46C) STORE
LARGE QTY IN COMPLIANCE WITH OSHA 29CFR1910.106. DO NOT TAKE
INTERNALLY. CLOSE CONTR AFTER EACH USE.
Other Precautions:EMPTY CONTRS MUST NOT BE WASHED & RE-USED FOR ANY
PURPOSE. DO NOT WELD, BRAZE/CUT ON EMPTY CONTR. NEVER USE PRESS TO
EMPTY. DRUM IS NOT A PRESSURE VESSEL. CONTAINERS SHOULD BE GROUNDED
AND BONDED TO R ECEIVING CONTAINER.
Respiratory Protection:PROPER SELECTION OF RESP PROT DEPENDS UPON MANY
FACTORS INCL DURATION/LEVEL OF EXPOS & CNDTNS OF USE. IN GEN EXPOS
TO ORG CHEM SUCH AS THOSE CNTND IN PROD MAY NOT REQ USE OF RESP
PROT IF USED IN WELL VENTD AREAS. IN RESTRICTED VENT (ING 16)
Ventilation:PROVIDE LOC EXHST VENT IN SUFFICIENT VOL & PATTERN SO AS TO
MAINTAIN EXPOS BELOW NUISANCE DUST LIM & PERMISSIBLE(ING 20)
Protective Gloves:IMPERMABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: FIRES. POLYMER FOAM IS PREFERRED FOR LG FIRES. FIRE FIGHT
PROC: EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. EXPLO HAZ: FROM HEAT, ELEC EQUIP, SPARKS & FLAME.
CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Boiling Pt:B.P. Text:>277F,>136C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1
Evaporation Rate & Reference:
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:60
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>115F(46C) AND
SOURCES OF IGNITION.
Hazardous Decomposition Products:BURNING, INCL WHEN HEATED BY
WELD/CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
DIOXIDE.
Waste Disposal Methods:DISPOSE I/A/W FED, ST & LOC LAWS. INCINERATE
ONLY IN EPA PERMITTED FACILITY. DO NOT INCINERATE CLSD CONTRS.
OBSERVE PREC FOR DISP OF FLAMM MATLS. CONTAMD ABSORB MAY BE
DISPOSED IN A HAZ WASTE LANDFILL . DISPOSE ONLY I/A/W FED, ST & LOC
REGS.(ING 14)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.