other prec:ch. 9, safe practices in welding & cutting. eye prot:lens. provide prot screens & flash goggles, if ing 16:that is too dark to see the weld zone. then go the iron manganese (sara iii). silicon supp data:respect to the fume plume, as well as the ing 4:hydrocarbon vaps from cleaning & degreasing ing 5:may decrease/incr by many times the original conc in ing 6:decomp prods of normal operation incl those ing 7:shown in ing section, plus those from the base metal ing 8:fume constituents of prod could incl primary oxides ing 9:& aluminum. gaseous reaction prods may incl carbon ing 10:formed by radiation from arc, in addition to ing 11:are employed. one rec way to determine composition & ing 12:is to take an air sample from inside the welder's msds toxicity property">
other prec:ch. 9, safe practices in welding & cutting. eye prot:lens. provide prot screens & flash goggles, if ing 16:that is too dark to see the weld zone. then go the iron manganese (sara iii). silicon supp data:respect to the fume plume, as well as the ing 4:hydrocarbon vaps from cleaning & degreasing ing 5:may decrease/incr by many times the original conc in ing 6:decomp prods of normal operation incl those ing 7:shown in ing section, plus those from the base metal ing 8:fume constituents of prod could incl primary oxides ing 9:& aluminum. gaseous reaction prods may incl carbon ing 10:formed by radiation from arc, in addition to ing 11:are employed. one rec way to determine composition & ing 12:is to take an air sample from inside the welder's msds toxicity property">
MSDS  
:
TECHALLOY, ER70S-5
CAS  
:
7439-89-6 7439-96-5 7440-21-3
NAME  
:
ing 13:& aws f1.2. see aws publication:"fume and gases in other prec:ch. 9, safe practices in welding & cutting. eye prot:lens. provide prot screens & flash goggles, if ing 16:that is too dark to see the weld zone. then go the iron manganese (sara iii). silicon supp data:respect to the fume plume, as well as the ing 4:hydrocarbon vaps from cleaning & degreasing ing 5:may decrease/incr by many times the original conc in ing 6:decomp prods of normal operation incl those ing 7:shown in ing section, plus those from the base metal ing 8:fume constituents of prod could incl primary oxides ing 9:& aluminum. gaseous reaction prods may incl carbon ing 10:formed by radiation from arc, in addition to ing 11:are employed. one rec way to determine composition & ing 12:is to take an air sample from inside the welder's
Name:SUPP DATA:RESPECT TO THE FUME PLUME, AS WELL AS THE
PRESENCE OF CONTAMINANTS IN ATMOSPHERE (SUCH AS CHLORINATED (ING 5)
RTECS #:9999999ZZ
Name:ING 4:HYDROCARBON VAPS FROM CLEANING & DEGREASING
ACTIVITIES). WHEN ELECTRODE IS CONSUMED, FUME & GAS COMPONENT (ING
6)
RTECS #:9999999ZZ
Other REC Limits:NONE RECOMMENDED
Name:ING 5:MAY DECREASE/INCR BY MANY TIMES THE ORIGINAL CONC IN
ELECTRODE. ALSO, NEW CMPNDS NOT IN ELECTRODE MAY FORM.(ING 7)
RTECS #:9999999ZZ
Name:ING 6:DECOMP PRODS OF NORMAL OPERATION INCL THOSE
ORIGINATING FROM VOLATILIZATION, REACTION, OR OXIDATION OF MATL(ING
8)
RTECS #:9999999ZZ
Name:ING 7:SHOWN IN ING SECTION, PLUS THOSE FROM THE BASE METAL
& COATING, ETC., AS NOTED ABOVE. REASONABLY EXPECTED (ING 9)
RTECS #:9999999ZZ
Name:ING 8:FUME CONSTITUENTS OF PROD COULD INCL PRIMARY OXIDES
OF IRON;SECONDARY COMPLEX OXIDES OF MANGANESE, SILICON(ING 10)
RTECS #:9999999ZZ
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC-WELDING MAY CREATE ONE OR
MORE OF THE FOLLOWING HLTH HAZ:FUMES & GASES CAN BE DANGEROUS TO
YOUR HEALTH. ARC RAYS CAN INJURE EYES & BURN SKIN. ELECTRIC SHOCK
CAN KILL. "SHORT-TERM OVEREXPO S TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS: DIZZ, NAUS, OR DRYNESS OR IRRIT OF NOSE,
THROAT, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OR EYES, TIGHTNESS IN CHEST, FEVER AND
ALLERGIC REACTIONS, (SEE EXPLO HAZ AND SPILL/LEAK SECTION)."
"LONG-TERM (CHRONIC) OVEREXPOS TO WELDING FUMES MAY LEAD TO
SIDEROSIS (IRON DEPOSIT IN LUNG S) AND IS BELIEVED BY SOME
INVESTIGATORS TO AFFECT PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes:FLUSH EYES WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES . SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER . INHAL:REMOVE
TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ ARTIFICIAL RESPIRA TION)
. INGEST:CALL MD IMMEDIATELY . EMPLOY FIRST AID TECHNIQUE
RECOMMENDED BY THE AMERICAN RED CROSS.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
FIRES .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE COMBUST &
FLAMMABLES. REFER TO AMERICAN NATIONAL STANDARDS Z49.1 FOR FIRE
PREVENTION DURING USE OF WELDING & ALLIED PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE
ELECTRICAL PARTS AND INSULATE HIMSELF FROM WORK AND GROUND. TRAIN
THE WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
Other Precautions:USE EXHAUST SYS TO CLEAR WELDING FUMES.MAKE SURE
INHALED AIR DOES NOT CONTAIN FUME CONSTITUENTS ABOVE PERMISSIBLE
EXPOS LEVELS.FOR ADDN SAFETY INFO SEE AMER STD Z49.1-1983, SAFETY
IN WELDING & CUTTING , & WELDING HANDBOOK, VOL. 1, (ING 15)
Respiratory Protection:USE RESPIRABLE FUME RESPIRATORY OR AIR SUPPLIED
RESPIRATORY WHEN WELDING IN A CONFINED SPACE OR WHERE LOCAL EXHAUST
OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE RECOMMENDED
EXPOSURE LIMITS.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC, OR BOTH, TO KEEP THE
FUMES AND GASES FORM THE WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:WEAR HELMENT/USE FSHLD W/FILTER (ING 16)
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS:, & ELECTRODES USED. OTHER CNDTNS WHICH ALSO INFLUENCE
COMPOSITION & QUALITY OF FUMES & GASES TO WHICH WORKERS MAY BE
EXPOSED INCL:COATINGS ON METAL BEING WELDED (SUCH AS PAINT, PLATI
NG, OR GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA, QUALITY
& AMT OF VENT, POSTION OF WELDER'S HEAD W/ (ING 3)
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:THE COMPOSITION & QUALITY OF WELDING
FUMES AND GASES ARE DEPENDED UPON THE METAL BEING WELDED, PROCESS,
PROC (SUPP DATA)
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE DISPOSABLE CONTAINER AND
OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.