LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:HEADACHES, DIZZINESS,
NAUSEA & ANESTHESIA. EYES:WILL CAUSE IRRITATION. SKIN:WILL CAUSE
DRYING & IRRITATION. CHRONIC:MAY CAUSE CONTACT DERMATITIS. COULD
HAVE LIVER & KIDNEY EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:BREATHING DIFFICULTIES.
======================= First Aid Measures =======================
First Aid:INHAL:REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF
NECESSARY. EYES:FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:WASH W/SOAP & WATER - USE SKIN CREAM. INGEST:DO NOT
INDUCE VOMIT ING - CALL MD.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:<20F,<-7C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL REACTS W/WATER. AEROSOL
CONTAINERS MAY EXPLODE WHEN HEATED >130F.
Spill Release Procedures:NOT NORMALLY A PROBLEM W/AEROSOLS - VENTILATE
& ABSORB LIQUID - REMOVE SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:AEROSOL CONTAINERS MAY EXPLODE WHEN HEATED >130F. DUE
TO HIGH DENSITY OF METALLIC ZINC, AEROSOL MUST BE THOROUGHLY
AGITATED BEFORE USE.
Respiratory Protection:NIOSH/MSHA APPROVED SELF CONTAINED BREATHING
APPARATUS IF VAPORS EXCEED THE TLV.
Ventilation:MECHANICAL VENTILATION REQUIRED IF IN A CONFINED AREA.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:USUALLY NOT REQUIRED FOR AEROSOL PRODUCT
USAGE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods:ALL USED & UNUSED PRODUCT SHOULD BE DISPOSED OF
IN CONFORMANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.